Professional Documents
Culture Documents
6655 100
B 1610 (+10/-0)
Min.LL = 6484+1.73* T
32 1547 32
2500
1342
By others 667
900
100 1000
Y
T
490
1080
100
17
2215
54
D
97
667
5
Z
900
30.0
X
°
.
1080
1180
T-0005368271_2_13
E
50 1510
13375 (+15/-0)
End View
Side Elevation
Note:
1. All dimensions are in millimeters.
2. Access opening 2500mm wide and 3300mm high into and through the building is required.
3. EN115-1, GB 16899 requirement for the minimum free clearance. Checking is required to
F ensure that the shown building layout is in compliance. Indication of the code requirement in
the drawing does not confirm that this requirement is fulfilled.
4. It is forbidden to drill any holes on escalator truss. As the truss integrity will be impacted.
5. The precision of weight within 0%~+7%, the section weight without disassembly component.
6. FF, DD and EE should be +33mm in seismic cases.
C KONE Corporation
Ensure permanent 3-phase power is available for the assembly and testing of the escalator,
Y provide 300mA earth leakage protection.
Protection from Damage
Ensure protection of the escalator equipment from damage by other trades is provided
1610 (+10/-0)
1610 (+10/-0)
X (during the whole project).
1547
G .
R2z:70kN R1z:79kN
240
- 3/1/2022 Stefanus Wijaya Stefanus Wijaya
Version Date Description Designed by Checked by Approved by
32
Project name
Power supply TOSERBA PALAPA - KRIAN
Plan View (By Customer)
Site address
Installation site
KONE Elevators Co. Ltd.
Customer No. 1 : 80 - 1
P000933516
1 2 3 4 5 6 7 8 9 10 11 12
A
Passenger Circulation Area Requirements Minimum Clearances Required Electrical entry position Barriers at Landings
min. 100
min. 100
Plus 80 mm Each Side
. .
min.2300
. A .
min. 80-max. 120 . .
min. 80-max. 120
min.2100
.
Landing surface
.
208 208
.
min.2000
. .
min.2500
.
.
.
.
2x(Outside of 490
.
Handrail Dimension
Plus 80 mm Each Side)
.
A = 80mm minimum clearance between the edge of a . .
40
Ø
. .
40
Ø
B Plus 80 mm Each Side)
.
a headguard is required.
C = For adjacent escalators the distance
min.2000
80 .
max.120 . .
max.120
Visual Features
C 1
Diagonal Dimension Escalator Mounting Detail X / Y 3
( X mirrored ) 3 2
4 5
FFL Permanent elastic
14 joint by others 6
27
.
9
.
200 8 12
.
120 .
(By Customer)
.
Side Elevation
10 7
FFL
135
.
(*)Steel plate .
Escalator (*)By
(*)Rubber 9
KONE
.
(*)Steel plate .
11
D
.
Note:
EN115 version EN115:1995+A1:1998+A2:2004 1. All dimensions are in millimeters.
2. Access opening 2500mm wide and 3300mm high into and through the building is required.
3. EN115-1, GB 16899 requirement for the minimum free clearance. Checking is required to
F ensure that the shown building layout is in compliance. Indication of the code requirement in
the drawing does not confirm that this requirement is fulfilled.
End Supports Without
4. It is forbidden to drill any holes on escalator truss. As the truss integrity will be impacted.
5. The precision of weight within 0%~+7%, the section weight without disassembly component.
6. FF, DD and EE should be +33mm in seismic cases.
C KONE Corporation
China T-0005368271_2_13
Bottom End
Approx. Weight:6701kg
Project No. Drawing No. T-0005368271 Scale Version Page
P000933516