( Fill in required data only ) Wire diameter mm(in.) Material Mean diameter mm(in.) Working Conditions: Number of coils To work in mm( in.) diameter hole Rate N mm /revolution ( lb-in./revolution) To work over mm(in . ) diameter shaft Special Information: Torque N mm(lb-in. ), ± N mm(lb-in.) Finish when angle between ends is _ degrees Loading (cyclic , impact, static, other ) Torque N mm( lb-in. ), ± N mm( lb-in. ) Required life cycles when angle between ends is _ degrees Required reliability Axial space required mm(in ) Operating deflection range revolutions Direction of coil (right or left-hand) Maximum operating temperature °C(°F) Maximum wound position revolutions or degrees Operating environment