Professional Documents
Culture Documents
Company
Location
Input
What is the Process Flow Rate 100.00
What is the Desired Hydralic Loading Ratio 0.33 NOTE: The hydralic loading ratio is typically set
What is the Desired Plate Spacing 1.63 from .25 to .5 The lower the settling rate or specific
gravity (of the settleable material) the lower the hydralic
loading ratio.
NOTE: Plate spacing can be set to any number desired. Hydralic loading ratios can be determined by field tests
The recommended low is .75" and the high is usually 2" but or calcualated based on the specific gravity of the
higher can be specified if required by your application. Plate chemically treated solids.
spacing is usually determined by the quantity of
Output
Required PSA 303
Actual Hydralic
Loading Ratio
In Ft/Min
In Ft/Min
Sludge Thickinging
Pyrimid Hopper
or