Professional Documents
Culture Documents
DSI GEWI Threadbar System EMEA
DSI GEWI Threadbar System EMEA
3
GEWI® Threadbar System
Key features of the system are: The GEWI® Threadbar System c onsists Bautechnik, the system also offers
of high yield GEWI® screwable steel general conformance with
n F
ully threaded bar – can be cut and and corresponding coupling and BS 4449 : 1997 (Carbon Steel Bars for
coupled at any point. anchoring accessories, which enable Prestressing of Concrete).
easy c onnections to and anchorages of
n R obust threadform – ideal for GEWI® steel. In accordance with the The minimum specified characteristic
construction site use. German certificates of approval yield strength is 500N/mm2 for bar
Z-1.5-76, Z-1.5-149 and Z-1.5-2. diameters 16 - 50mm and 555N/mm2
n Coarse pitch threadform with for the 63.5mm diameter bar.
two flats – ensures self-cleaning of GEWI® Steel High Yield Threadbar is 16 - 50mm bars can be welded using
thread. a high tensile alloy steel bar which appropriate industry practices relative
features a coarse right-hand thread to the carbon content of the steel.
n F ully galvanized systems – over its full length. The system is Welding of the higher grade 63.5mm
galvanized threadbars and proven worldwide and offers versatility diameter bar is not recommended.
accessories also available from in a range of applications.
stock.
Manufactured in accordance with the
German Certificate of Approval
issued by the Deutsches Institut für
1) GEWI® Threadbars also meet the requirements according UK standard (500/600 N/mm2) and Austrian standard (550/620 N/mm2).
(a) For geotechnical applications, 75% of the ultimate tensile force Ft may be used for testing
4
Couplers for GEWI® Threadbars
Couplers allow GEWI® Threadbars to The static coupler is used either in vibration and cyclical load reversals are
be coupled or extended reliably and constant tension applications or in a anticipated. Lock nuts must be used at
efficiently. The choice of the type of combination of tension and each end of the couplers. Torqued to a
coupler used depends on the compression loading. The longer predetermined value, they prevent the
application. dynamic couplers are to be used when development of cracks in structural
concrete.
For the connection of GEWI® s pecial transition couplers are available. connecting fixed and therefore not
Threadbars with different diameters, In addition, DSI provides solutions for pivotable GEWI® bars.
For couplers exposed to compression However it is important that the two This can be achieved by using grub
load, predominately in geotechnical threadbars meet centrally within the screws and a center pin. The right
applications, lock nuts can be omitted. coupler and remain so during position of the GEWI® Threadbars
installation to ensure a correct load within the coupler can be checked
transfer. easily using colored marks.
Anchorages which are to be embedded In addition, an anchorage can For the connection of GEWI®
in concrete can be carried out using an be realized using a flanged nut and a Threadbars with steel structures, a
anchor nut (hexagonal nut), a steel lock nut. weldable anchor piece is available.
plate and a lock nut.
5
GEWI® Threadbar Accessories
Nominal Flat Plate Hexagonal Nut Recessed Plate Domed Nut Formed Plate Hemisphere
Diameter Stock Size * AF Length Stock Size * AF Length Stoke Size * Dia. Length
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
16 150 x 150 x 10 32 40 150 x 150 x 30 150 x 150 x 10 46 18
20 150 x 150 x 10 36 45 150 x 150 x 30 35 41 150 x 150 x 10 46 18
25 150 x 150 x 10 41 50 150 x 150 x 30 38 45 150 x 150 x 10 57 23
28 150 x 150 x 10 46 55 200 x 200 x 40 43 54 150 x 150 x 10 57 23
32 200 x 200 x 25 55 60 200 x 200 x 40 46 57 80 33
40 250 x 250 x 40 65 70 250 x 250 x 50 120 55
50 300 x 300 x 40 80 120 300 x 300 x 50 120 60
Nominal Static Coupler(a) Static Coupler(a) Dynamic Coupler(a) Lock Nut Flanged Anchor Nut Torque
Diameter Dia. Length Dia. Length Dia. Length AF Length AF Length Dia. MT
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [Nm]
16 32 90 34 90 32 115 32 30 30 35 50 200
20 36 105 38 105 32 130 32 40 36 40 60 350
25 40 115 42 115 41 150 41 40 41 45 70 700
28 45 125 48 125 41 170 41 45 46 50 85 950
32 52 140 55 140 50 180 50 50 50 60 100 1600**
40 65 160 68 160 60 210 65 70 60 70 120 2900**
50 80 200 84 200 80 240 80 80 80 85 150 8000**
63.5 102 260 106 260 102 260 90 110 100 115 250 8000**
Plates Flat Plate Formed Plate up to 20° Articulating Plate up to 30° Gusseted Plate up to 45°
Ancillaries Mechanical Shell Tapered Washer up to 15° Hemisphere up to 30° Lifting Shackle
Corrosion Protection
Galvanizing acc. to EN ISO 1461 : 1999 Double Corrosion Protection acc. to BS 8081 : 1989
Rock Bolts Permanent Soil Nails
Soil Nails Permanent Ground Anchors
Temporary Ground Anchors
6
GEWI® Threadbar – Connecting Reinforcement
The GEWI® connecting reinforcement The GEWI® connecting systems with The GEWI® connecting bar type M is to
consists of prefabricated GEWI® couplers straight reinforcement consist of be fixed to the formwork. For this
for the use in construction joints. coupler bars type M and coupler bars purpose, s pecial plugs are available
type A. These are provided in three which can be nailed on the formwork.
The transmission of the forces of the standard lengths which cover the range
construction joint to the reinforcement of the required embedment length.
of the adjacent concrete takes place
by bond.
n H
ook Bar Type W
n E
nd Anchoring Bar Type E.
7
GEWI® Threadbar – Prefabricated Connecting Reinforcement
Standard Lengths
8
GEWI® Threadbar – Prefabricated Connecting Reinforcement
Customized Products
Specifications Specifications
Specifications Specifications
GEWI® E X - x GEWI® P X - x
9
GEWI® Threadbar – Typical Applications for Reinforcing Concrete
10
GEWI® Threadbar – Mounting Connecting Reinforcement
4 5
bar 1 bar 2
3. After the formwork has been demoulded, screw off the plug.
2 Wooden Formwork
4. Screw in the GEWI® Coupler Bar Type A and lock it with the
required torque. Coupler Bar Type M
Plug
3 Plug Concrete
4 Concrete
11
Austria Netherlands A ustria
DYWIDAG-Systems International GmbH DYWIDAG-Systems International B.V
Alfred-Wagner-Strasse 1 Veilingweg 2 A rgentina
4061 Pasching/Linz, Austria 5301 KM Zaltbommel, Netherlands
Phone +43-7229-61 04 90 Phone +31-418-57 89 22
A ustralia
Fax +43-7229-61 04 980 Fax +31-418-51 30 12 belgium
E-mail: dsi-a@dywidag-systems.at E-mail: email@dsi-nl.nl
www.dywidag-systems.at B osnia and herzegovina
Norway
Belgium and Luxembourg DYWIDAG-Systems International A S B razil
DYWIDAG-Systems International N.V. Industriveien 7A C anada
Industrieweg 25 1483 Skytta, Norway
3190 Boortmeerbeek, Belgium Phone +47-67-06 15 60 C hile
Phone +32-16-60 77 60 Fax +47-67-06 15 59
Fax +32-16-60 77 66 E-mail: adm@dsi-dywidag.no C olombia
E-mail: info@dywidag.be
Poland C osta R ica
France DYWIDAG-Systems International Sp. z o.o. C roatia
DSI-Artéon SAS ul. Przywidzka 4/68
Avenue du Bicentenaire 80-174 Gdansk, Poland C zech republic
ZI Dagneux-BP 50053 Phone +48-58-300 13 53
01122 Montluel Cedex, France Fax +48-58-300 13 54 D enmark
Phone +33-4-78 79 27 82 E-mail: dsi-polska@dywidag-systems.com
www.dywidag-systems.pl E gypt
Fax +33-4-78 79 01 56
E-mail: dsi.france@dywidag.fr estonia
www.dywidag-systems.fr Portugal
DYWIDAG-Systems International LDA F inland
Germany Rua do Polo Sul
DYWIDAG-Systems International GmbH Lote 1.01.1.1 – 2B F rance
Schuetzenstrasse 20 1990-273 Lisbon, Portugal G ermany
14641 Nauen, Germany Phone +351-21-89 22 890
Phone +49-3321-44 18 32 Fax +351-21-89 22 899 G reat B ritain
Fax +49-3321-44 18 18 E-mail: dsi.lisboa@dywidag.pt
E-mail: suspa@dywidag-systems.com G reece
Spain
DYWIDAG-Systems International GmbH DYWIDAG Sistemas Constructivos S.A. G U AT E M A L A
Max-Planck-Ring 1 Avenida de la Industria, 4 HONDURAS
40764 Langenfeld, Germany Pol. Ind. la Cantuena
Phone +49-2173-79 02 0 28947 Fuenlabrada (Madrid), Spain H ong K ong
Fax +49-2173-79 02 20 Phone +34-91-642 20 72
E-mail: suspa@dywidag-systems.com Fax +34-91-642 27 10 I ndonesia
www.dywidag-systems.de E-mail: dywidag@dywidag-sistemas.com
www.dywidag-sistemas.com I taly
DYWIDAG-Systems International GmbH J apan
Germanenstrasse 8 United Kingdom
86343 Koenigsbrunn, Germany DYWIDAG-Systems International Ltd. K orea
Phone +49-8231-96 07 0 Northfield Road
Fax +49-8231-96 07 40 Southam, Warwickshire L ebanon
E-mail: suspa@dywidag-systems.com CV47 0FG, Great Britain L u x embourg
Phone +44-1926-81 39 80
Italy Fax +44-1926-81 38 17 M alaysia
DYWIT S.P.A. E-mail: sales@dywidag.co.uk
Via Grandi, 64 www.dywidag-systems.com/uk M e x ico
20017 Mazzo di Rho (Milano), Italy
Phone +39-02-93 46 87 1
N etherlands
Fax +39-02-93 46 87 301 N orway
E-mail: info@dywit.it
www.dywit.it O man
P anama
P araguay
P eru
POLAND
P ortugal
Q atar
S audi A rabia
singapore
S outh A frica
S pain
S weden
S witzerland
T aiwan
T hailand
Please note: T urkey
This brochure serves basic information
U nited A rab E mirates
purposes only. Technical data and information
provided herein shall be considered U ruguay
04171-1/11.10-web st