Dimensions Tolerance Value Unit Width B ±24 2400 mm Thickness of belt *) S1 app. 32.2 mm Thickness of top cover S2 20 mm Thickness of bottom cover S3 6 mm Weight of belt app. 89.6 kg/m Width of belt edges *) k ≤ 15 mm Nominal Breaking Strength 800 N/mm *) acc. to DIN 22102 Part 1
Cover Rubber Tolerance Value Unit
Name of rubber compound RMA I Tensile Strength*) ≥ 20 N/mm² Elongation at break *) ≥ 450 % Abrasion **) ≤ 140 mm3 Hardness ±5 57 Shore A *) acc. to DIN 22102 Part 1, **) acc. to DIN 22102 Part 1 and DIN 53516
Strength member Value Unit
Type of ply EP 200 Number of plies 4 Separation strength cover/carcass *) ≥ 4.5 N/mm Separation strength ply/ply*) ≥ 5.0 N/mm *) acc. to DIN 22102 Part 1
Splice Parameters Value Unit
Number of steps *) 3 Ref.-No. 2014 - MW 76864241319
Step length *) 250 mm
Splice length **) 750 mm Bias 720 mm *) Recommended Splice Dimensions acc. to DIN 22102 Part 3 **) For splice length incl. bias of 16.7° add 0.3 x belt width. Length may vary depending on the type of vulcanizer being used