Professional Documents
Culture Documents
Tutorial 3 - Projection of Lines
Tutorial 3 - Projection of Lines
2. End point A of line AB is 25 mm from HP and 10 mm from VP. End B is 50 mm from HP and 45 mm
from VP. Distance between the end projectors as measured parallel to XY is 60 mm. Draw elevation,
plan and profile view in the first quadrant.
4. Line AB has its ends A 10 mm from VP and 20 mm from HP. Point B is 55 mm from VP and 50 mm
from HP. Distance between end projectors is 50 mm. Draw the front view, top view and L.H. side view
of the line assuming the line to be in the third quadrant.
5. Point A of line AB is 25 mm above HP and 20 mm in front of VP. Front view is inclined at 300 to XY
line and measures 65 mm. Point B is in the third quadrant. Plan of the line is 450 to the XY line. Draw
the FV and TV of the line.
6. Midpoint of the projections of the line is in HP and VP. Distance between the projectors is 70 mm. The
line is in two quadrants. FV and TV measure 100 mm and 120 mm respectively. Draw FV and TV of
the line.
7. End point A of line AB is in horizontal plane (HP) and 40 mm from vertical plane (VP). End B is 60
mm from HP and 40 mm from VP. Distance between the end projectors as measured parallel to XY
line is 70 mm. Draw elevation, plan and right hand side profile view in first quadrant.
8. There are two poles with different heights as shown in Figure 1. The different dimensions of the poles
with respect to the vertical and horizontal planes are also given in Figure 1. The poles are perpendicular
to HP and the points P and Q are connected with a wire. The shortest distance of point P from the XY
line is 50 mm. Find (i) distance of point Q from VP. (ii) height of the shorter pole (through P). (iii)
length of elevation/front view of line PQ.
MECHANICAL ENGINEERING DEPARTMENT
Course No.: UES101 Course Title: ENGG. DRAWING
(The poles and the wire may be treated as lines for the projections).
Figure 1