Professional Documents
Culture Documents
Suitable for domestic water services, heating and air-conditioning plants, compressed air systems.
Female/female threads. Flat lever handle in lined steel. Body in nickel-plated brass.Minimum and maximum working temperatures: -20oC, 150oC in absence
of steam. Threads: ISO228 (equivalent to DIN EN ISO 228 and BS EN ISO 228).
Suitable for domestic water services, heating and air-conditioning plants, compressed air systems.
Female/female threads. Lever handle in steel (aluminium in the sizes 2”1/2, 3” and 4”). Body in nickel-plated brass.
Minimum and maximum working temperatures: -20°C, 150°C in absence of steam. Threads: ISO228 (equivalent to DIN EN ISO 228 and BS EN ISO 228).
Threads: female/female or male/female. Red Lever handle in nylon. Minimum and maximum working temperatures: 0oC, 90oC.
Threads: ISO228 (equivalent to DIN EN ISO 228 and BS EN ISO 228).
130 Swing check valve
SIZE PRESSURE CODE PACKING
Suitable for domestic water services, heating and air-conditioning plants, compressed air systems.
They can be installed in any position: vertical, horizontal, oblique. Suitable for use with gasoline and fuels in general.
Body in brass. Plate in stainless steel. Washer in Viton. Spring in stainless steel. Outlet plugs in brass, thread 1/4”. Minimum working temperature: -20°C. Maximum
working temperature: 100°C with water ;150°C with fluid hydrocarbons or compressed air. Threads ISO228 (equivalent to DIN EN ISO 228 and BS EN ISO 228).
Suitable for domestic water services, heating and air-conditioning plants, compressed air systems.
They can be installed in any position: vertical, horizontal, oblique.
Body in brass. Plate in polymer. O-ring in NBR. Spring in stainless steel. Minimum and maximum working temperatures: -20°C, 100°C. Threads: ISO228 (equivalent
to DIN EN ISO 228 and BS EN ISO 228).
192 Y strainer
SIZE PRESSURE CODE PACKING
Suitable for domestic water services, heating and air-conditioning plants, compressed air systems.
Female/female threads and inspection plug. Body in brass. Minimum and maximum working temperatures: -20oC, 110oC in absence of steam Filtration
degree: 1/4” through 2” 500μm. Threads: ISO228 (equivalent to DIN EN ISO 228 and BS EN ISO 228).
Suitable for domestic water services, heating and air-conditioning plants, compressed air systems.
They can be installed in any position: vertical, horizontal, oblique.
Body in brass. Plate in stainless steel. Washer in NBR. Spring in stainless steel. Minimum and maximum working temperatures: -20oC, 100oC. Threads: ISO228
(equivalent to DIN EN ISO 228 and BS EN ISO 228).
Suitable for domestic water services, heating and air-conditioning plants, compressed air systems.
They can be installed in any position: vertical, horizontal, oblique.
Body in brass. Plate in polymer. Washer in NBR. Spring in stainless steel. Minimum and maximum working temperatures: -20°C, 100°C. Threads: ISO228
(equivalent to DIN EN ISO 228 and BS EN ISO 228).
Suitable for domestic water services, heating and air-conditioning plants, compressed air systems.
They can be installed in any position: vertical, horizontal, oblique.
Body in brass. Plate in polymer. Washer in NBR. Spring in stainless steel. Strainer in polymer and stainless steel. Filtration degree: 3/8” through 2”: 1200μm; 2”1/2
through 4”: 2000μm. Minimum and maximum working temperatures: -20°C, 100°C. Threads: ISO228 (equivalent to DIN EN ISO 228 and BS EN ISO 228).
Filtration degree: 3/8” through 2”: 1200μm; 2”1/2 through 4”: 2000μm. Strainer in stainless steel. Threaded end in polymer. Threads: ISO 228 (equivalent to DIN EN
ISO 228 and BS EN ISO 228).
143 EUROPRESS pressure reducing valve
SIZE PRESSURE CODE PACKING
Compensated piston operation. Female/female threads. Body in nickel-plated brass. Minimum and maximum working temperatures: 0 C, 80 C. Maximum
o o
inlet pressure: 25bar. Outlet pressure can be adjusted: 3/4”,1” from 1 to 5,5 bar; 1”1/4 through 4” from 1 to 6 bar. Factory preadjustment 3 bar. Outlet pressure
gauge connection 1/4” on both sides. Threads: ISO 228 (equivalent to DIN EN ISO 228 and BS EN ISO 228).
Compensated piston operation. Female/female threads. Body in nickel-plated brass. Minimum and maximum working temperature: 0oC, 80oC. Maximum inlet
pressure: 15 bar. Outlet pressure can be adjusted between 1 and 4 bar. Factory preadjustment 3 bar. Outlet pressure gauge connection 1/4”. Threads: ISO
228 (equivalent to DIN EN ISO 228 and BS EN ISO 228).
Body in nickel-plated brass. Float in polyethilenic resin. O-ring in NBR. Maximum working temperature: 110oC. Maximum discharge pressure: 6 bar. Threads:
ISO228 (equivalent to DIN EN ISO 228 and BS EN ISO 228).
Body in nickel-plated brass. Check and vent spring in stainless steel Check seat in nylon. Check and vent seal in NBR. Maximum working temperature: 120oC.
Opening pressure: 8,5 bar. Threads ISO228 (equivalent to DIN EN ISO 228 and BS EN ISO 228).
Suitable for the use together with automatic air vent valves art. 362 - 362R - 363 - 364 - 364R. Body in nickel-plated brass.
Maximum working temperature: 110°C. Threads: ISO228 (equivalent to DIN EN ISO 228 and BS EN ISO 228).
166 GAR ball hose bibcock
SIZE PRESSURE CODE PACKING
Body in nickel-plated brass. Hose connection in brass. Lever handle in steel. Minimum and maximum working temperatures: -20oC, 80oC. Threads: ISO228
(equivalent to DIN EN ISO 288 and BS EN ISO 228).
Body in nickel-plated brass. Supplied without hose connection. Lever handle in steel. Minimum and maximum working temperatures: -20oC, 80oC. Threads:
ISO228 (equivalent to DIN EN ISO 288 and BS EN ISO 228).
Male thread. Body in chrome-plated brass. Handle in chrome-plated ABS. Minimum and maximum working temperatures: 0°C, 80°C. Threads ISO228
(equivalent to DIN EN ISO 228 and BS EN ISO 228).
Body in brass. Nominal pressure: 25 bar. Female threads: ISO 228 (equivalent to DIN EN ISO 228 and BS EN ISO 228) Male threads: ISO 7/1 (equivalent to DIN EN
10226-1 and BS EN 10226-1).
1 084LK01 10/500
2 084PP03 -
084LK 084PP
Body in brass. Nominal pressure: 25 bar. Female threads: ISO 228 (equivalent to DIN EN ISO 228 and BS EN ISO 228) Male threads: ISO 7/1 (equivalent to DIN EN
10226-1 and BS EN 10226-1).