Professional Documents
Culture Documents
Elongation at
2% 2%
Break
Modulus of
2.21 GPa 2.21 GPa
Elasticity (7 days)
All at 25°C
TamRez 220 is a high modulus, low viscosity, epoxy resin Compressive Strength
designed for injection into non-moving cracks in concrete
7 days > 72 MPa > 80 MPa
structures. Its medium to low viscosity will allow maximum
penetration into small cracks. TamRez 220 exhibits Slant Shear Bond
extremely high strength in its cured state, thereby 15 MPa 15.6 MPa
Strength
restoring structural integrity. It is moisture insensitive,
allowing for injection into damp cracks. TamRez 220 is ASTM C882:2005
available in two grades Standard Grade (STD) for fast set Flexural Strength > 50 MPa > 50 MPa
applications and Tropical Grade (TG) for extended pot life
applications. Maximum
> 100°C < 60°C
Exotherm
KEY BENEFITS
Note: TamRez 220TG will not set when the temperature
dips below 12°C but will set once the temperature has risen
> Fast cure (TamRez 220)
again.
> Increased working time (TamRez 220TG)
> Excellent adhesion All technical data stated herein is based on tests carried
> Moisture insensitive out under laboratory conditions.
> Non-shrink
> Pumpable
APPLICATION GUIDELINES
> Aggregate extendable
> Potable water certified
As with any epoxy resin system, surface preparation is
critical. Concrete surfaces or cracked sidewalls to which
TYPICAL APPLICATIONS this product is to be applied should be cleaned by air or
water. This will ensure a superior bond.
> Pre-cast members
> Injection of cracks in dry or damp concrete Repairs are carried out using a suitable resin injection
> Columns and beams system such as the Tam Cartridge System or a suitable 2:1
> Bolt grouting ratio pump.
> Joint reinstatement
> Concrete repair mortars
www.normet.com
TamRez 220
Epoxy Binder and Injection Resin
Page 2 of 2
Whilst any information and/or specification contained herein is to the best of our knowledge, true and accurate, we always recommend that a trial be carried out to confirm suitability of the
product. Please note regional climatic conditions may cause a variation in the performance of the product. No warranty is given or implied in connection with any recommendations or
suggestions made by us or our representatives, agents or distributors. The information in this data sheet is effective from the date shown and supersedes all previous data. Please check with
your local Normet office to confirm that this is current issue. TamRez 220 V1SG-14
www.normet.com