sterile disposable clothing packages in cardiovascular procedures to reduce contamination and ensure safe care for ICB patients across all locations. STEP 1 Preparation: Place the package on a clean, dry surface, typically a sterile material reserve table, positioning it at the center. With clean, dry hands, puncture the seal of the outer wrapping of the sterile package at one end. STEP 2 Unpacking: Slide the contents of the package onto the reserve table. Carefully remove the protective covering of the package contents, ensuring not to tear or perforate it. STEP 3 Gloving: Put on sterile gloves using the open glove technique. STEP 4 Arrangement: Gently fold the upper outer corner towards the left end of the table. Fold the next corner towards the right end of the table. Arrange the contents of the package at the upper right corner. Position the basic instrumental equipment needed for the procedure at the upper left corner.. STEP 5 Securing: Simultaneously open the upper and lower right ends of the package cover and slide them to cover the entire surface. Repeat the same maneuver with the upper and lower left ends. Secure the edges of the package by fixing them with hemostatic forceps, adhesive tapes, or manual tying on both sides of the reserve table. STEP 6 Verification and Circulation: Verify and remove the chemical indicator from the sterile package to ensure the sterility of the contents and provide a suitable area for handling medical devices during the surgical procedure. Finally, circulate the necessary medical devices for the surgical procedure, ensuring quality control and maintaining proper aseptic technique.