Professional Documents
Culture Documents
DATA SHEET
HRC+
Decentralized high efficiency heat recovery unit
For commercial applications, schools, offices
Page1
HIGH EFFICIENCY HEAT RECOVERY UNIT
DATA SHEET
GENERAL CHARACTERISTICS
Page2
HIGH EFFICIENCY HEAT RECOVERY UNIT
DATA SHEET
CONSTRUCTION FEATURES
HRC is a ventilation unit complete with heat recovery unit dedicated to air exchange without wasting energy.
The unit is particularly suitable for single rooms where it is not possible to create ducted systems;
FANS: Brushless forward curved centrifugal fans with electronic motor and modulating control.
Very high efficiency and low noise levels.
FREE COOLING: Free cooling realized inside the unit with large air passage and damper with motorized actuator.
ELECTRICAL CABINET: Electrical panel complete with 4-speed fan management board, antifreeze, automatic bypass,
temperature probes, post-heating coil management and automatic dirty filter signalling.
Control panel on the machine for HV and V units, remote for H units, necessary for unit operation
with capacitive touch, integrated air quality and humidity temperature sensors;
for mounting on box 502-503 or on wall;
Wifi chip for management through remote APP;
EFFICIENCY: Thanks to the construction features and its components, it is able to achieve recovery efficiency
greater than 90%.
In the winter and summer seasons there is a considerable energy recovery of the fresh air
introduced into the environment.
Page3
HIGH EFFICIENCY HEAT RECOVERY UNIT
DATA SHEET
COMMAND FUNCTIONALITY
The composition of the three possible electronics of the unit and the functions of the various versions is defined below:
VERSION I
CARDS ON BOARD THE MACHINE
EXTERNAL COMMANDS
ON OFF
Page4
HIGH EFFICIENCY HEAT RECOVERY UNIT
DATA SHEET
UNIT CONFIGURATION
HRC+ 60 H I
1) Defines the maximum range 2) Type of installation 3) Type of control
Models from: 600 m³/h and 1150 m³/H H: horizontal I: electronics I
HV: vertical sub-window
V: vertical
HORIZONTAL (H)
Page5
HIGH EFFICIENCY HEAT RECOVERY UNIT
DATA SHEET
HRC+ 60H / HV
GENERAL TECHNICAL DATA
Size 60 H/HV
Fans
Type of Fans Forward curved centrifugal fans - directly coupled electronic motor - 0/10 V signal
Number of fans No 2+1
Air flow V3/V2/V1 m³/h 620 / 355 / 165
Useful pressure Pa 15
Heat exchanger(Data referring to the UNI EN 13141-7 standard Internal temp. 20° - Internal humidity 28% - External temp. 7° - External humidity 72%)
Type of exchanger Counterflow plates – polypropylene material
Number of Exchangers No 2
Recovery efficiency EN13141-7 % 86.1
Recovery efficiency EN305 % 91.8
Filters
Type of filters Pleated filters
Filtration class ePM1 70
Acoustic data(Data referring to the UNI EN 3741 and UNI EN 3744 standards)
Sound power Lw
dB(A) 59
sent by the facility
Electrical data
Supply voltage v 230 / 1 / 50Hz.
Current consumption TO 3.5
Max absorbed power w 340
Max absorbed power with
kW 1.34
electrical resistance
Current drawn with electrical
TO 7.8
resistance
Power consumption V3
With 15 pa pressure and clean 165
filters
Degree of protection IP X0
Page6
HIGH EFFICIENCY HEAT RECOVERY UNIT
DATA SHEET
Weight Kg 71 72
Condensation OR 20 20
Page7
HIGH EFFICIENCY HEAT RECOVERY UNIT
DATA SHEET
Specification item
High-flow heat recovery ventilation units for decentralized applications;Specific unit for ventilation in environments with ventilation and air
treatment needs, such as commercial environments, offices, schools and small tertiary sectors;
CONSTRUCTION FEATURES
self-supporting structure in galvanized sheet metal with internal insulation in polyethylene; Heat exchangers and counter-current cross-
flows with maximum tightness and no leakage of traditional heat exchangers;
Compact dimensions for simplified ceiling (H) or wall (HV) installation with front and bottom panels easily accessible for maintenance and
inspection.
Circular inlets for air ducts to the outside with grilles, installation template supplied;
Rapid filter inspection and drain for condensate evacuation;
Electrical panel with management cards and power cables and remote panel prepared; forward curved centrifugal fans with EC motors
with electronic flow control and low consumption ePm1 class filters with low pressure drop outside air and stale air
Electrical panel on the unit with microprocessor and dedicated regulation. Fan management, temperature display, timed dirty filter
management, freecooling management and antifreeze function;
Possibility of installation on board an electric pre-heating coil and hydronic post-heating coils for integration or replacement of existing
radiators.
Remote control panel with WIFI and APP or modbus RTU to be purchased separately
Product details
TO Supplier name or brand
b Model identifier HRC+ 60
c Declared typology UVNR
Q Location and description of the signal related to the filter Displayed on control panel and unit manual
Page8
HIGH EFFICIENCY HEAT RECOVERY UNIT
DATA SHEET
HRC+ 120H / HV
GENERAL TECHNICAL DATA
Size 120H/HV
Fans
Type of Fans Forward curved centrifugal fans - directly coupled electronic motor - 0/10 V signal
Number of fans No 3+2
Air flow V3/V2/V1 m³/h 1150 / 750 / 255
Useful pressure Pa 15
Heat exchanger(Data referring to the UNI EN 13141-7 standard Internal temp. 20° - Internal humidity 28% - External temp. 7° - External humidity 72%)
Type of exchanger Counterflow plates – polypropylene material
Number of Exchangers No 2
Recovery efficiency EN13141-7 % 84.9
Recovery efficiency EN305 % 90.4
Filters
Type of filters Pleated filters
Filtration class ePM1 70
Acoustic data(Data referring to the UNI EN 3741 and UNI EN 3744 standards)
Sound power Lw
dB(A) 62
sent by the facility
Electrical data
Supply voltage v 230 / 1 / 50Hz.
Current consumption TO 4.8
Max absorbed power w 620
Max absorbed power with
kW 2.12
electrical resistance
Current drawn with electrical
TO 11.3
resistance
Power consumption V3
With 15pa pressure and clean 355
filters
Degree of protection IP X0
Page9
HIGH EFFICIENCY HEAT RECOVERY UNIT
DATA SHEET
Weight Kg 88 89
Condensation OR 20 20
Page10
HIGH EFFICIENCY HEAT RECOVERY UNIT
DATA SHEET
Specification item
High-flow heat recovery ventilation units for decentralized applications;Specific unit for ventilation in environments with ventilation and air
treatment needs, such as commercial environments, offices, schools and small tertiary sectors;
CONSTRUCTION FEATURES
self-supporting structure in galvanized sheet metal with internal insulation in polyethylene; Heat exchangers and counter-current cross-
flows with maximum tightness and no leakage of traditional heat exchangers;
Compact dimensions for simplified ceiling (H) or wall (HV) installation with front and bottom panels easily accessible for maintenance and
inspection.
Circular inlets for air ducts towards the outside with grilles, template for installation supplied;;
Rapid filter inspection and drain for condensate evacuation;
Electrical panel with management cards and power cables and remote panel prepared; forward curved centrifugal fans with EC motors
with electronic flow control and low consumption ePm1 class filters with low pressure drop outside air and stale air
Electrical panel on the unit with microprocessor and dedicated regulation. Fan management, temperature display, timed dirty filter
management, freecooling management and antifreeze function;
Possibility of installation on board an electric pre-heating coil and hydronic post-heating coils for integration or replacement of existing
radiators. Remote control panel with WIFI and APP or modbus RTU to be purchased separately
Page11
HIGH EFFICIENCY HEAT RECOVERY UNIT
DATA SHEET
Fans
Type of Fans Backward curved centrifugal fans - directly coupled electronic motor - 0/10 V signal
Number of fans No 2
Air flow V3/V2/V1 m3/h 700
Useful pressure Pa 15
Heat exchanger(Data referring to the UNI EN 13141-7 standard Internal temp. 22° - Internal humidity 50% - External temp. -12° -External humidity 90%)
Type of exchanger Counterflow plates – polypropylene material
Number of Exchangers No 1
Recovery efficiency EN13141-7 % 87
Recovery efficiency EN305 % 93
Filters
Type of filters Pleated filters
Filtration class ePM1 70
Acoustic data(Data referring to the UNI EN 3741 and UNI EN 3744 standards)
Sound power Lw
dB(A) 60
sent by the facility
Electrical data
Supply voltage v 230 / 1 / 50Hz.
Current consumption TO 3.6
Max absorbed power w 360
Max absorbed power with
kW 1.36
electrical resistance
Current drawn with electrical
TO 7.9
resistance
Power consumption V3
With 15 pa pressure and clean 330
filters
Degree of protection IP X0
Page12
HIGH EFFICIENCY HEAT RECOVERY UNIT
DATA SHEET
HRC+ 70 V
Width A mm 633
Depth B mm 636
Diameter DN OR 200
Weight Kg 86
Condensation OR 20
Page13
HIGH EFFICIENCY HEAT RECOVERY UNIT
DATA SHEET
Specification item
High-flow heat recovery ventilation units for decentralized applications;
Specific unit for ventilation in environments with ventilation and air treatment needs, such as commercial environments, offices, schools
and small tertiary sectors;
CONSTRUCTION FEATURES
self-supporting structure in galvanized sheet metal with internal insulation in polyethylene; Heat exchangers and counter-current cross-
flows with maximum tightness and no leakage of traditional heat exchangers;
Compact wall dimensions on standard dimensions 600x600 mm with front panels easily accessible for maintenance and inspection.
Circular inlets for air ducts to the outside with grilles, installation template supplied;
Rapid filter inspection and drain for condensate evacuation; Electrical panel with management cards and power cables and remote panel
prepared;
centrifugal fans of the centrifugal type with backward curved blades with EC motors with electronic flow control and low consumption
ePm1 class filters with low external air pressure drop and stale air
Electrical panel on the unit with microprocessor and dedicated regulation. Fan management, temperature display, timed dirty filter
management, freecooling management and antifreeze function;
Possibility of installation on board an electric pre-heating coil and hydronic post-heating coils for integration or replacement of existing
radiators.
Remote control panel with WIFI and APP or modbus RTU to be purchased separately
Page14
HIGH EFFICIENCY HEAT RECOVERY UNIT
DATA SHEET
ACCESSORY LIST
* (1) Yields and technical data with nominal flow rates and temperatures: Water IN / OUT - 50° / 40° - Air IN 20°
COMMAND
B/W
COMMAND
B/W
Page15
HIGH EFFICIENCY HEAT RECOVERY UNIT
DATA SHEET
The UVC system, with germicidal action, includes a UVC lamp and power
supply wired and installed inside the unit to be selected when ordering;
The lamp has a UVC wavelength of 254 nm;
The life of the lamp is estimated at 10,000 hours of operation;
Model UVR1
Compatible model unit Channeled models
Rated electric power Watt 36
Diet / 230V / 1 / 50
Wave length n 254
Bulb length mm 350
Spare UV lamp
Kit consisting of a bulb for the UVC system placed inside the unit;
Kit consisting of two external grilles for external wall holes diam. 200 mm;
Kit consisting of two external grilles for external wall holes diam. 250 mm;
Page16
HIGH EFFICIENCY HEAT RECOVERY UNIT
DATA SHEET
IT ORDERING CODESTO
H models with sensitive high efficiency heat exchanger
Model Description Code
HRC+60HI High flow decentralized sensible heat recovery unit for horizontal installation Dn250x2 VRVP60OC1II
HRC+ 120HI High flow decentralized enthalpy heat recovery unit for horizontal installation Dn250x2 VRVPX2HC1II
Page17
HIGH EFFICIENCY HEAT RECOVERY UNIT
DATA SHEET
Remote control
Compatible model All versions
Description Black White
Code EQA649II EQB649II
Page18
HIGH EFFICIENCY HEAT RECOVERY UNIT
DATA SHEET
CE marking
The CE marking (present on each machine) certifies compliance with the following EU standards:
The data contained in this technical catalog may be changed by the manufacturer without notice.
Page19