Professional Documents
Culture Documents
Camping Box
https://youtu.be/4HF55vEVdDE
© GVM-Corner
1
Thank you very much for watching our videos
and purchasing this manual!
I hope this, in combination with the video, will help you
to build your own camping box.
You need:
Other material
· 2 x full extension drawer slides 700 mm
· 3 x piano hinges 1120 mm
· 1 x piano hinge 980 mm
· 1 x piano hinge 280 mm
· 1 x piano hinge 140 mm
· 2 x chains ca. 500 mm
· 1 x magnetic catch (or similar)
· screws and glue
2
Cut all the pieces according to the cut list and do all the cut outs.
I've used a 68 mm hole saw and made the rest with a plunge saw.
But of course you can use just a jig saw.
Round the edges with a router or sand paper.
BOTTOM
BACK
3
FRONT
4
KITCHEN DRAWER
5
Pre drill all the holes, otherwise the wood can burst!
If you use 4 x 50 mm screws, use a 3 mm drill and
drill about 35 mm deep. Screw everything together.
You can use glue if you want, but it is not necessary.
! The width of the left slot depends on the thickness of the drawer slides you use.
I've used 2 x 13 mm thick slides. So 294 mm + 26 mm = 320 mm.
6
For the kitchen drawer I recommend using thinner screws, like 3 x 35 mm for example.
7
Screw on all the piano hinges the right way
like shown in the pictures.
8
Screw on the drawer slides...
9
finished
In my car, the bed middle board lies on the turned down back seats
and the head board is hooked to the front seats.
If you have a different car, it can be necessary to support those boards
in a different way.
Thanks again and enjoy your travels with the camping box!
10