Professional Documents
Culture Documents
3
LINER HANGERS
Scab
Tieback
Liner
Scab Liner
4
LINER HANGERS
5
LINER HANGERS
FEATURES/BENEFITS
• Unique patented slip design provides more
slip contact area and uniform loading in the
casing
• Flex-Lock kit can be mounted on any grade
of casing
Flex-Lock Hydraulic Set Flex-Lock Hydraulic Set • Meets NACE requirements and is compat-
Liner Hanger Rotating Liner Hanger ible with all casing grades
Product No. 292-50 Product No. 292-51
• Premium threads can be cut on the casing
body
• Premium Teflon ® seals used in hydraulic
ORDERING EXAMPLE ORDERING EXAMPLE cylinder
PRODUCT NO. 292-50 PRODUCT NO. 292-51
• Hydraulic cylinder is compatible to the liner
LINER HANGER, FLEX-LOCK ROTATING LINER HANGER, FLEX-LOCK
HYDRAULIC SET, 7 In. x 9-5/8 In. HYDRAULIC SET, 7 In. x 9-5/8 In. • Tapered roller bearings allow liner to be
40 - 53.5 lb/ft, 8.334 In. OD, 7.00 In. ID, 40 - 53.5 lb/ft, 8.334 In. OD, 7.00 In. ID, rotated in set position (rotating only)
22 Rc max. (kit only) 22 Rc max. (kit only)
6
LINER HANGERS
SC - Special Clearance
7
LINER HANGERS
8
LINER HANGERS
FEATURES/BENEFITS
• Uses the same proven hydraulic set-
ting mechanism as the HMC and
Hyflo II
• Compatible with liner casing string
• Non-welded construction ORDERING EXAMPLE
• Tapered roller bearings allow liner to PRODUCT NO. 292-16
HSR LINER HANGER, HYDRAULIC SET
rotate in set position ROTATING, 9-5/8 In. 47 lb/ft x 13-3/8 In.
• Meets NACE requirements for H2S 72-85 lb/ft, 11.750 In. OD, 8.681 In. ID, 8 Rd
Box x Pin, 110 KSI min. yield
service and is compatible with CRA
liners
SPECIFICATION GUIDE
Liner Hanger Size Casing Maximum
Liner x Casing Weight OD
In.
(mm) lb/ft kg/m In. mm
17.0 - 20.0 25,3 - 34,3 6.125 155,6
4-1/2 x 7 23.0 - 26.0 34,3 - 38,8 6.000 152,4
(114,3 x 177,8) 26.0 - 32.0 38,8 - 47,7 5.875 149,2
35.0 - 38.0 52,2 - 56,7 5.750 146,1
9
LINER HANGERS
FEATURES/BENEFITS
• Unique patented slip design provides more
slip contact area and uniform loading in the
casing
• Flex-Lock kit can be mounted on any grade of
casing
• No weld construction meets NACE require-
ments and is compatible with all casing grades
Flex-Lock Mechanical Set Flex-Lock Mechanical Set
• Premium threads can be cut on the casing
Liner Hanger Rotating Liner Hanger body
Product No. 292-40 Product No. 292-41
• Automatic J-cage allows hanger to return to
run-in position should hanger preset while
ORDERING EXAMPLE ORDERING EXAMPLE running in
PRODUCT NO. 292-40 PRODUCT NO. 292-41 • Circulation area is identical in set and run-in
FLEX-LOCK LINER HANGER, FLEX-LOCK LINER HANGER,
MECHANICAL SET, 7 In. x 9-5/8 In. MECHANICAL SET ROTATING, 7 In.
position
40-53.5 lb/ft, 8.334 In. OD, 7.00 In. ID, x 9-5/8 In. 40-53.5 lb/ft, 8.334 In. OD, • Tapered roller bearings allow liner to rotate in
right-hand set, 110 KSI min. yield 7.00 In. ID, right-hand set, 110 KSI min.
(kit only) yield (kit only)
set position (rotating only)
10
LINER HANGERS
SC - Special Clearance
11
LINER HANGERS
SPECIFICATION GUIDE
CMC ™ LINER HANGER
Product No. 292-10 Liner Hanger Size
Liner x Casing
Casing Weight Maximum OD
FEATURES/BENEFITS
• Light-to-medium duty mechanical set
hanger ORDERING EXAMPLE
PRODUCT NO. 292-22
• Provides maximum circulation area
HYFLO III LINER HANGER, MECHANICAL
• J-cage available in right or left-hand SET, 5 In. 15.0 lb/ft x 7 In. 17 - 23 lb/ft,
set 6.148 In. OD, 4.408 In. ID, right-hand set,
8 Rd Pin x Pin, 110 KSI min. yield
• Body equivalent to liner grade and
weight
SPECIFICATION GUIDE
Liner Hanger Size Casing Maximum
Liner x Casing Weight OD
In.
(mm) lb/ft kg/m In. mm
13
LINER HANGERS
SPECIFICATION GUIDE
Liner Hanger Size Casing Maximum
Liner x Casing Weight OD
In. mm lb/ft kg/m In. mm
14.0 - 15.5 20,8 - 23,0 4.750 120,7
4 x 5-1/2 101,6 x 139,7 17.0 25,3 4.625 117,5
20.0 29,8 4.531 115,0
17.0 - 20.0 25,3 - 29,8 6.125 155,6
23.0 38,7 6.000 152,4
4-1/2 x 7 114,3 x 177,8 26.0 - 32.0 38,7 - 47,6 5.875 149,2
35.0 52,1 5.750 146,1
38.0 56,5 5.625 142,9
17.0 - 20.0 25,3 - 29,8 6.125 155,6
5x7 127,0 x 177,8 23.0 38,7 6.000 152,4
26.0 - 32.0 38,7 - 47,6 5.875 149,2
35.0 52,1 5.750 146,1
24.0 - 26.4 35,7 - 39,3 6.688 169,7
5 x 7-5/8 127,0 x 193,7 29.7 - 33.7 44,2 - 50,1 6.500 165,1
39.0 58,0 6.375 161,9
42.8 - 45.3 63,7 - 67,4 6.250 158,8
24.0 - 26.4 35,7 - 39,3 6.688 169,7
5-1/2 x 7-5/8 139,7 x 193,7 29.7 - 33.7 44,2 - 50,1 6.500 165,1
39.0 58,0 6.375 161,9
24.0 - 28.0 35,7 - 41,7 7.750 196,9
5-1/2 x 8-5/8 139,7 x 219,1 32.0 - 36.0 47,6 - 53,6 7.562 192,0
40.0 - 44.0 59,2 - 65,4 7.375 187,3
49.0 72,9 7.188 182,6
32.0 - 36.0 47,6 - 53,6 8.500 215,9
7 x 9-5/8 177,8 x 244,5 40.0 - 47.0 59,5 - 64,7 8.375 212,7
53.5 79,6 8.312 211,1
58.4 - 61.1 86,9 - 90,9 8.152 207,0
45.5 - 55.5 67,7 - 80,4 9.500 241,3
7-5/8 x 10-3/4 193,7 x 273,1 60.7 90,3 9.375 238,1
65.7 - 71.1 97,8 - 105,8 9.188 233,4
RCM Mechanical Set 48.0 - 54.5 71,4 - 81,0 12.000 304,8
Rotating Liner Hanger 9-5/8 x 13-3/8 244,5 x 339,7 61.0 - 68.0 90,8 - 101,1 11.875 301,6
Product No. 292-09 72.0 - 85.0 107,1 - 126,5 11.750 298,5
14
LINER HANGERS
D ™ LINER HANGER/PACKER
Product No. 293-08
The D Liner Hanger/Packer serves as FEATURES/BENEFITS
both hanger and packer when the liner is • Ideal for use as a scab liner to isolate
not to be cemented. As the liner is hung, damaged casing
the seal is compressed to pack off against • Automatic J-cage allows hanger to
the casing ID. The D Liner Hanger/Packer return to run-in position should hanger
is available with either left or right-hand, preset while running in
open-bottom, automatic J-cage. • Low-profile slips provide more sup-
Normally used as the lower liner ported slip area and reduce the possi-
packer on a scab liner to isolate damaged bility of damage while running in
casing, a CPH Liner Packer is used to • T-slot bow springs eliminate use of set
isolate the top portion of casing. screws
A C-2 Setting Tool with packer setting • Can be run upside down and pulled in
dogs is used to carry in the liner. The D tension for shallow scab liners
Liner Hanger/Packer is set by right or left-
hand rotation. Weight is applied to set the ORDERING EXAMPLE
packer seal. When the CPH Liner Packer PRODUCT NO. 293-08
is used, the setting tool is released with D LINER HANGER PACKER W/BODY LOCK
RING, 5-1/2 In. 15.50 lb/ft x 7.000 In. 17 - 20
right-hand rotation and then picked up, lb/ft, 5.500 In. 8 Rd Box x Pin, 6.250 In. OD,
allowing the setting dogs to rest on top of 4.950 In. ID, left-hand set, L-80
the CPH packer. Set-down weight will set
the CPH packer seal and hold-down slips.
Materials suited for H2S service are
available on request.
SPECIFICATION GUIDE
Liner Hanger Size Casing Maximum
Liner x Casing Weight OD
In. mm lb/ft kg/m In. mm
4 x 5-1/2 101,6 x 139,7 15.5 - 17.0 23,1 - 25,3 4.662 118,4
23.0 34,2 4.350 110,5
4-1/2 x 5-1/2 114,3 x 139,7 15.5 - 17.0 23,1 - 25,3 4.720 119,9
17.0 - 23.0 25,3 - 34,2 6.120 155,4
4-1/2 x 7 114,3 x 177,8 26.0 - 32.0 38,7 - 47,6 5.850 148,6
35.0 - 38.0 52,1 - 56,5 5.650 143,5
17.0 - 23.0 25,3 - 34,5 6.118 155,4
5x7 127,0 x 177,8 23.0 - 26.0 34,2 - 38,7 5.955 151,3
29.0 - 32.0 43,2 - 47,6 5.861 148,9
17.0 - 20.0 25,3 - 29,8 6.250 158,8
5-1/2 x 7 139,7 x 177,8 20.0 - 23.0 29,8 - 34,2 6.167 156,6
26.0 - 29.0 38,7 - 43,2 6.000 152,4
5-1/2 x 7-5/8 139,7 x 193,7 33.7 - 39.0 50,1 - 58,0 6.386 162,2
7 x 9-5/8 177,8 x 244,5 40.0 - 47.0 59,5 - 69,9 8.437 214,3
47.0 - 53.5 69,9 - 79,6 8.250 209,6
7-5/8 x 9-5/8 193,7 x 244,5 40.0 - 47.0 59,5 - 69,9 8.437 214,3
47.0 - 53.5 69,9 - 79,6 8.250 209,6
9-5/8 x 13-3/8 244,5 x 339,7 48.0 - 54.0 71,4 - 80,4 12.000 304,8
D Liner Hanger/Packer
Product No. 293-08
15
LINER HANGERS
16
LINER HANGERS
5-1/2 x 7-5/8 139,7 x 193,7 26.4 - 29.7 39,3 - 44,2 6.500 165,1
33.7 - 39.0 50,1 - 58,0 6.375 161,9
9-5/8 x 13-3/8 244,5 x 339,7 61.0 - 72.0 90,8 - 107,1 12.000 304,8
Product No. 296-01 — CPH Liner Hanger Packer to be run with C2 Setting Tool
Product No. 296-23 — CPH Liner Hanger Packer to be run with RH Setting Tool
Product No. 296-14 — CPH Liner Hanger Packer to be run with HR Setting Tool
17
LINER HANGERS
SLP-R ™ SLOTTED
LINER PACKER
Product No. 293-07
The SLP-R Slotted Liner Packer is a FEATURES/BENEFITS
medium-duty liner hanger packer that is • Light to medium-duty liner hanger
designed primarily for running slotted packer
liner in horizontal well applications. The • Ideal for running uncemented or slot-
SLP-R will affect a seal at the liner top ted liner in vertical or horizontal wells
and is capable of suspending moderate • Hydraulic set and release
liner loads. The liner packer is run in on • Most sizes rated to 1000 psi at 250° F
drill pipe or tubing attached to the SLP • Released by straight pull
Hydraulic Release Running Tool (Prod-
uct No. 265-32), and is set by applied
pressure through the run-in string. A ORDERING EXAMPLE
secondary mechanical release system PRODUCT NO. 293-07
LINER PACKER SLOTTED, SLP-R, 5-1/2 In.
is incorporated in the running tool, should 17.0 lb/ft x 7 In. 26 - 29 lb/ft, 5.959 In. OD,
the hydraulic system malfunction. The 5.150 In. OD, right-hand release, 8 Rd Pin
down, (Segmented Float Nut, Commodity No.
SLP-R can be straight pull released with 07-84244-00), L-80
a fishing spear if desired.
SPECIFICATION GUIDE
Liner Hanger Size Casing Maximum
Liner x Casing Weight OD
In. mm lb/ft kg/m In. mm
18
LINER HANGERS
FEATURES/BENEFITS
ORDERING EXAMPLE
• Medium-duty compression set liner PRODUCT NO. 296-12
top packer LINER PACKER, HYFLO III, with external hold
• Provides effective annular seal at the down slips, 5-1/2 In. 14.0 - 23.0 lb/ft x 7 In.
26.0 - 29.0 lb/ft, 5.235 In. float nut, 5-1/2 In.
liner top 8 Rd Box down, 5.955 In. OD, 4.997 In. ID,
• Prevents formation breakdown, loss 5.955 In. ext. OD, 5.500 In. ext. ID, 6 ft long
ext., 22 Rc max w/ 25,000 lb shear ring
of cement slurry and gas migration
SPECIFICATION GUIDE
Packer Size Casing Maximum
Liner x Casing Setting Tool Weight OD
In. Profiles
(mm) Available lb/ft kg/m In. mm
4 x 5-1/2 C2 14.0 - 17.0 20,9 - 25,3 4.678 118,8
(88,9 x 139,7) 20.0 - 23.0 29,7 - 34,3 4.460 113,3
9-5/8 x 13-3/8 C2, 2RH, HR 54.5 - 61.0 81,2 - 90,6 12.169 309,1
(244,5 x 339,7) 68.0 - 72.0 101,0 - 107,0 12.000 304,8
Product No. 296-12, Hyflo III Liner Packer to be run with C2 Setting Tools
Product No. 296-18, Hyflo III Liner Packer to be run with HR Setting Tools
Product No. 296-19, Hyflo III Liner Packer to be run with 2RH Setting Tools
Hyflo III Liner Packer
Product No. 296-12
19
LINER HANGERS
SPECIFICATION GUIDE
Liner Packer Size Casing Maximum
Liner x Casing Weight OD
In. mm lb/ft kg/m In. mm
20
LINER HANGERS
HIGH-PERFORMANCE
LINER PACKER
Product No. 281-01
The High-Performance Liner Packer is FEATURES/BENEFITS
hydraulically set, usually run as a lap • Hydraulic set liner isolation packer
packer in liners, tieback packer, or mid- • Run as an integral part of the casing
string casing packer. The packer is set string
by applying 2,500 psi or more of internal • Full ID through the packer bore
pressure. The liner packer uses the • Field proven F-1 Seal Element incor-
proven F-1 Permanent Packer Sealing porated
Element System.
Materials suited for H2S service are ORDERING EXAMPLE
available on request. PRODUCT NO. 281-01
HIGH PERFORMANCE LINER PACKER,
7 In. 23 lb/ft x 9-5/8 In. 40-53.50 lb/ft 8 Rd
Pin x Box, 8.312 In. OD, 6.278 In. ID, 22 Rc
max. 80 KSI MYS
SPECIFICATION GUIDE
Liner Packer Size Casing Maximum
Liner x Casing Weight OD
In. mm lb/ft kg/m In. mm
5-1/2 x 7-5/8 139,7 x 193,7 24.0 - 33.7 35,7 - 50,1 6.555 166,5
7-5/8 x 10-3/4 193,7 x 273,1 32.7 - 65.7 48,7 - 97,8 9.345 237,4
9-5/8 x 13-3/8 244,5 x 339,7 48.0 - 72.0 (SC) 71,4 - 107,1 11.985 304,4
SC - Special Clearance
21
LINER HANGERS
H ™ LINER ISOLATION
PACKER
Product No. 281-02
The H Liner Isolation Packer is normally FEATURES/BENEFITS
run on drill pipe, using a C-2 Setting Tool, • Hydraulic set liner packer run integral
with the liner setting sleeve and tieback to the casing
extension. The packer is set by applying • Available with upper hold down slips
2,500 psi to the drill pipe. To ensure • Full ID through the packer bore
packoff integrity, the packer uses the • Field proven F-1 Seal Element incor-
same proven upper slips, cone, and pack- porated
ing element assemblies as Baker’s F-1
Permanent Packers. ORDERING EXAMPLE
Materials suited for H2S service are PRODUCT NO. 281-02
H LINER ISOLATION PACKER, 9-5/8 In. 40.00
available on request. and Heavier lb/ft x 13-3/8 In. 48 - 72 lb/ft,
Buttress Pin x Pin, 12.125 In. OD, 8.690 In. ID,
22 max.
SPECIFICATION GUIDE
Liner Packer Size Casing Maximum
Liner x Casing Weight OD
In. mm lb/ft kg/m In. mm
5-1/2 x 7-5/8 139,7 x 193,7 24.0 - 33.7 35,7 - 50,1 6.555 166,5
9-5/8 x 13-3/8 244,5 x 339,7 48.0 - 72.0 71,4 - 107,1 12.110 307,6
22
LINER HANGERS
SPECIFICATION GUIDE
Liner Packer Size Casing Maximum
Liner x Casing Weight Tool OD
In. mm lb/ft kg/m In. mm
15.5 - 17.0 23,1 - 25,3 4.500 114,3
3-1/2 x 5-1/2 88,9 x 139,7 20.0 - 23.8 29,8 - 35,4 4.438 112,7
26.0 38,7 4.375 111,1
23.0 - 26.0 34,2 - 38,7 6.000 152,4
4-1/2 x 7 114,3 x 177,8 26.0 - 32.0 37,8 - 47,6 5.875 149,2
35.0 - 38.0 52,1 - 56,5 5.750 146,1
23.0 - 26.0 34,2 - 38,7 6.000 152,4
5x7 127,0 x 177,8 26.0 - 32.0 37,8 - 47,6 5.875 149,2
35.0 - 38.0 52,1 - 56,5 5.750 146,1
5 x 7-5/8 127,0 x 193,7 26.4 - 29.7 39,3 - 44,2 6.500 165,1
33.7 - 39.0 50,1 - 58,0 6.375 161,9
5-1/2 x 7-5/8 139,7 x 193,7 26.4 - 29.7 39,3 - 44,2 6.500 165,1
33.7 - 39.0 50,1 - 58,0 6.375 161,9
40.0 - 47.0 59,5 - 69,9 8.375 212,7
7 x 9-5/8 177,8 x 244,5 47.0 - 53.5 69,9 - 79,6 8.250 209,6
58.4 86,9 8.188 208,0
7 x 10-3/4 177,8 x 273,1 45.5 - 55.5 67,7 - 82,6 9.500 241,3
40.0 - 43.5 59,5 - 64,7 8.438 214,3
7-5/8 x 9-5/8 193,7 x 244,5 47.0 69,9 8.375 212,7
53.5 79,6 8.312 211,1
9-5/8 x 11-3/4 244,5 x 298,5 65.0 96,7 10.375 263,5
9-5/8 x 13-3/8 244,5 x 339,7 61.0 - 72.0 90,8 - 107,1 12.000 304,8
11-3/4 x 13-3/8 298,5 x 339,7 72.0 107,1 12.125 308,0
JM Liner Tieback Packer
Product No. 272-25
23
LINER HANGERS
ORDERING EXAMPLE
PRODUCT NO. 295-30
LINER SETTING SLEEVE W/ TIEBACK
EXTENSION, with 6 ft Type II Extension, 8.250
In. ext. OD, 7.500 In. ext. ID, 7.000 In. 8 Rd
box down, 6.278 In. ID, (6.516 In. OD Float
Nut, Commodity No. 09-05930-60), 22 Rc max.
24
LINER HANGERS
FEATURES/BENEFITS
• Available with tieback extensions in 6,
10, 15, 20 and 40 ft lengths
• All tieback receptacles are honed for
premium tieback seals
• Available with metal-to-metal seal pro-
file
• High pressure/high temperature ver-
sions available for specific applica-
tions
• Double elastomer seal with metal-to-
metal shoulder standard
• Beveled shoulder at top for ease of
entry
ORDERING EXAMPLES
PRODUCT NO. 295-32
LINER SETTING SLEEVE, HR with
6 ft Type I Extension, 7 In. 26 - 41 lb/ft new
Vam Box down, 8.250 In. extension OD,
7.500 In. extension ID, 6.276 In. ID,
110 KSI MYS
25
LINER HANGERS
C2 ™ SETTING TOOL
Product No. 265-21
The C2 Setting Tool is used to run and If a weight set top packer is to be set
cement liners and compress weight- set after cement displacement, the setting
packers after cementing. A splined, left- tool is raised until the setting dogs are
hand threaded nut engages left-hand above the packer setting sleeve. Then
threads in the setting sleeve to support weight is applied to set the packer.
the liner as it is run. The tool is supported
by a bearing-race system to provide easy FEATURES/BENEFITS
release by right-hand rotation after the • Used to run left-hand set and hydrau-
liner is hung. A sealing packoff system lic set hangers
(inverted swab cups, flapper valve as- • Ball bearing race/floating nut system
sembly, PBR seal unit, or RS packoff) ensures positive release from liner top
prevents upward flow around the tool • Drill pipe thread at top
during cementing. • Accepts all types of cementing packoff
The liner wiper plug (attached to the assemblies
setting tool or suspended in the plug • Optional packer setting dogs incorpo-
holder bushing) is released when the rated in main body
drill pipe pump-down plug lands in the • Full strength mandrel to carry long,
liner wiper plug and shears the holding heavy liners to depth
pins or lugs.
ORDERING EXAMPLE
PRODUCT NO. 265-21
LINER SETTING TOOL C2, 7 In. Casing,
4.500 In. IF Box up, 2-7/8 In. EUE 8 Rd Box
down, 6.516 In. OD Float Nut, 8.125 In.
cap OD, 110 KSI MYS
C2 Setting Tool
with Setting Dogs
Product No. 265-21
26
LINER HANGERS
27
LINER HANGERS
RS Seal Assembly PBR Seal Assembly Type I and II Flapper Cup Seal System
Product No. 282-06 Product No. 276-03 Valve Assembly Product No. 276-04
Product No. 282-05
28
LINER HANGERS
ORDERING EXAMPLES
PRODUCT NO: 274-10
LANDING COLLAR, Type I, 7.000 In. 29.00 lb/ft, Vam Box x
Pin, 7.656 In. OD, 6.187 In. ID, 4140 HT
29
LINER HANGERS
V ™ SET SHOE
Product No. 100-70
Used for cementing jobs where the bottom formation is
soft, the V Set Shoe has two back-pressure valves to
prevent back flow. It permits pumping cement through side
Type I Liner Wiper Plug ports when the nose of the shoe is on bottom. Inserts,
Product No. 269-21 valves and guide are all manufactured from drillable mate-
rial.
Ball Catcher Sub (Baffle Type)
Product No. 299-91 TYPE I AND TYPE II
LINER WIPER PLUGS
Product Nos. 269-21 and 269-22
During cementing, the Liner Wiper Plug separates cement
from the displacing fluid. The Type I Plugs are shear-
pinned to the bottom of the setting tool; Type II Plugs are
placed in a plug holder bushing in the liner, below the
setting tool. When a pump-down plug latches and seals in
the wiper plug, the buildup in pressure shears the pins and
the entire assembly moves down the liner. After cleaning
the liner behind the cement, the wiper plug lands and
latches in the landing collar.
Type II Liner Wiper Plug
Product No. 269-22
PUMP-DOWN PLUG
Product No. 270-20
The Pump-Down Plug is used to clean the liner running-in
string. It is circulated down between the cement and
displacing fluid and latches into the liner wiper plug,
forming a solid plug to clean the liner.
ORDERING EXAMPLES
PRODUCT NO. 100-70
SET SHOE, V, 7.000 In. 29.00 lb/ft, AB-FL4S Box up, 7.000 In. OD,
6.109 In. ID, 4140 HT
30
LINER HANGERS
ORDERING EXAMPLE
PRODUCT NO. 269-25
LF PLUG SYSTEM, TYPE I, 7 In. 26 - 32 lb/ft
5.750 In. OD Stabilizer, 1.641 In. ID Wiper
Plug, Nitrile rubber
31
LINER HANGERS
INSERT INSTALLATION
Depending on the final insert configuration
(packoff, landing collar, guide shoe, or float
valve), accessory components are added to
the top or the bottom of the insert unit. After
the insert unit and its setting tool are posi-
tioned in the liner ID, hydraulic pressure from
a small hand pump is applied to the setting
tool, setting the insert unit’s slip.
For landing collars and guide shoes, the
insert is installed in the bottom end of the
Insert Drillable
Cementing Packoff casing joint. For float assemblies and drill-
Product No. 266-64 able packoff bushings, the insert is installed
in the top end of the casing joint.
Insert Landing Collar, Type II
Product No. 266-59
FEATURES/BENEFITS
• Modular Insert Seal Unit will easily convert
to landing collar, float collar, packoff as-
sembly or guide/float shoe
• Manufactured from drillable aluminum and
phenolic components
• Eliminates costly premium thread connec-
tions
• Installs easily in the liner string
• Can be inserted in the liner at the well site
ORDERING EXAMPLE
PRODUCT NO. 266-56
COLLAR, LANDING INSERT, TYPE I, 7.000 In.
29 - 32 lb/ft, 6.292 - 5.969 In. casing ID, 5.960 In.
OD, 2.890 In. ID, 6061-T6 aluminum
32
LINER HANGERS
FEATURES/BENEFITS
• One-piece mandrel for high burst and
collapse properties
• Molyglass chevron seals rated at
10,000 PSI at 400° F
• Available in lengths from 6 to 40 ft
• Optional seal packages available for
severe well conditions
OS ™ TIEBACK STEM
Product No. 272-23
Field proven and economical, these o-
ring style tieback stems are designed for
medium-pressure applications.
FEATURES/BENEFITS
• Medium service tieback stem
• Three sets of o-ring seals for medium
pressure integrity
• One-piece body for strength
ORDERING EXAMPLES
PRODUCT NO. 297-50
PBR SEAL ASSEMBLY, w/3 sets of Molyglass
Seals, 7.000 In. 41.00 lb/ft Vam Box, 7.500 In.
Seal OD, 8.250 In. OD, 5.820 In. ID, f/6 ft
extension, w/round nose guide, 110 KSI min.
yield
33
LINER HANGERS
34
LINER HANGERS
FEATURES/BENEFITS
• Provides a means to release the drill
pipe dart from the surface
• Manifold assembly for conditioning/
cementing the liner
• Swivel assembly permits run in string
to be rotated easily
• Heavy duty construction will handle
heavy liner loads
ORDERING EXAMPLE
PRODUCT NO. 278-20
LC PLUG DROPPING HEAD AND SWIVEL,
4-1/2 In. IF modified Pin down, complete with
valves unions, and single line manifold and 5
In. OD Lift Nipple, with 2.063 In. ID ball
dropping port, 110 KSI min. yield
35
LINER HANGERS
ORDERING EXAMPLE
PRODUCT NO. 278-28
PLUG DROPPING HEAD, TD, with Block
Lock, 4-1/2 In. IFTJ Box x Pin, 9.50 In. OD,
3.50 In. ID, AISI 4140 HT, 36 RC max.
36
LINER HANGERS
POSITIVE BALL
DROPPING SUB
Product No. 278-29
The Positive Ball Dropping Sub is used to
release varied sizes of setting balls to a ball
seat downhole. This can be accomplished
without breaking a drill pipe connection at
the surface or by removing a hammer union
cap. The ball is enclosed in a recess unaf-
fected by the flow of fluids and is released
with a simple turn of the handle. The handle
is locked during the circulation period, thus
preventing possible premature release of
the setting ball. A counterclockwise turn of
the handle will confirm the presence of a ball
without prematurely releasing. The sub is
designed to drop varied sizes of balls, rang-
ing from 1.25 to 2.25 diameter.
FEATURES/BENEFITS
• Provides “positive” means to release a
setting ball downhole
• Ball is protected from fluids while condi-
tioning the liner
• Simple operation
• Drops various sizes of balls
ORDERING EXAMPLE
PRODUCT NO. 278-29
POSITIVE BALL DROPPING SUB
f/1.250 - 2.250 In. Ball, w/4.500 IF TJ Box x Pin, Flag Sub
3.000 In. ID, 10,000 PSI WP, 4140 HT Product No. 278-21
FLAG SUB
Product No. 278-21
The Flag Sub is placed immediately below
the plug dropping head and swivel. The
position of the flag indicates that the pump-
down plug has been released from the head
and has moved down the drill pipe.
FEATURES/BENEFITS
• Positive indicator that plug has left the
cementing head
• High tensile strength
• Drill pipe connections standard
ORDERING EXAMPLE
PRODUCT NO. 278-21
FLAG SUB
4-1/2 In. IF modified Box x Pin, 6.125 In. OD,
Positive Ball Dropping Sub Flag Sub
3.250 In. ID, 110 KSI min. yield
Product No. 278-29 (End-View Cutaway)
37
LINER HANGERS
ST ™ LANDING SUB
Product No. 276-05
The ST Landing Sub is installed in the FEATURES/BENEFITS
drill string below the running tool to pro- • Provides means to actuate liner hanger
vide a method of applying pressure to a or setting tool without landing a ball in
hydraulically actuated tool. This tool is a landing collar
especially useful in horizontal applica- • Full ID after ball shears out
tions when the ball seat is in a highly • Pass drill pipe darts through easily
deviated section of the well. • Available for all size liner setting tools
To set a hydraulic hanger, a ball is
circulated down the drill pipe to a seat in
ORDERING EXAMPLE
the ST Landing Sub and sufficient drill
PRODUCT NO. 276-05
pipe pressure is applied to activate the ST LANDING SUB, w/ball guide, size 5.000
setting mechanism in the liner hanger. & 5.500 In., 2.375 In. EUE 8 Rd Box x Pin,
After the hanger is set, a pressure in- 4.000 In. OD, 2.000 In. ID, w/3500 SPI shear,
f/1.500 In. dia ball, 110 KSI MYS
crease (approximately 3,100 psi) shears
the brass screws in the shear ring and
shifts the tool to the full open position.
The full opening inside diameter of the
ST Landing Sub then allows for the pas-
sage of the pump down plug during the
cementing of the liner.
38