Professional Documents
Culture Documents
Problem #1.
If the two-stage amplifier is driven by a 75, 50mV source and the second stage is
loaded with an RL = 18k, determine the following parameters: stated with the Bdc = 150,
Bac = 175
+15V
3.3k 3.3k
33k 33k
VOUT
10F
10F 10F
Vin RL
For the given circuit above determine all the parameters stated from a) to d). The final problem is
given ahead for you to have enough time in solving all the required parameters. Please wait for
the Final Summative exam to be open on the MS team channel, all answers must be placed once
the scheduled final summative exam is open. Please observe the time set for the said activity and
turn in at least 15 mins before the closing time to avoid technicalities that may arise. Thank you
and may God grant you all wisdom for this activity……
Problem #2
The cascaded amplifier of figure below uses a common collector first stage followed by a
common emitter second stage. For transistor Q 1, hoc 0, hic = 1k, hrc 1, and hfc = -100. For
Q2, hre = hoe = 0, hfe = 100, and hie = 1k. Find the following;
+15V
R6
R1 90k 5k
R4 90k
CC CC
RS = 0 R2 100k 5k
9k
R3 R5 R7 9k
10k CB