Professional Documents
Culture Documents
Labayna
Step 7: Click on Sketch and Click Corner Rectangle/Center Rectangle and create a Rectangle
in a sketch and click smart dimension and click all sides in the rectangle and pull all sides at 120
mm.
Step 8. In sketch Fillet and click all the sides at a radius of 10mm.
Step 9. Click feature and click extruded boss/base measures 60mm then enter or click check
button.
Name: Shira Ellaine B. Ladlad BS-ECE Prof: J. P. Labayna
Step 10: Click on Front plane and Click Sketch and Create a Circle in a middle at the
radius of 35 cm and click Features and Click Extruded Boss/base at the depth 60mm
them Click Check button or Press Enter.
Click Fillet and Click The Radius of the Circle you create in the middle of the circle and in the
outer of the radius of 4mm and press Enter or Click
Step 14: Press space bar and Click Four View top,Front,Right, Isometric