• Jointing polymeric insulated cables of different • Supplied as a kit for one single core joint (P1) or specifications; three single core joints (P3) containing all the • Conductor sizes equal or unequal, compressed or not or necessary components. solid; • Shipping weight and volume (approx) of kit (P1) • May be directly buried; - 12 kV 2.3 kg / 0.01 m3 • Jointing cables laid underground or in tunnels on - 17.5 kV 2.6 kg / 0.01 m3 horizontal racks, or aerial. - 24 kV 2.9 kg / 0.01 m3 - 36 kV 4.1 kg / 0.01 m3 CABLES ___________________________ INSTALLATION FEATURES _______________ • Copper or aluminium conductor, solid or stranded; • Conductor sizes: 25mm² to 400mm²; • No need for special tools, no heating, taping or • Single core polymeric insulation (PE, XLPE, EPR …); resin. • Insulation voltage up to 36kV (Um); • Immediate energizing after completion of the joint. • Semi-conducting screen either extruded or taped; • Installation temperature: 0°C to +50°C • Metallic screen of tape, wire or polylam type; • Stocking temperature: -10°C to +50°C • Non-armoured or armoured. OTHER PRODUCTS _____________________ STANDARDS ________________________ • Joint for 3/C polymeric cables RTJM/EC-3C, • Generally meets the requirements of IEEE 404-2000 – EIJM/EC-3C. CENELEC HD 629.1 S2 –IEC 60502-4 – NF C 33-001 – • Transition joint between 3/C MIND paper insulated NF C 33-050 A1 – ENEL DJ 4853 – DIN 57 278. cables (radial or non radial) and 3 x 1/C polymeric cables EPJMt/EC-1C/3C. • Mechanical connector: IEC 61238-1 class A, HN 68-S-91 • Joint for 1/C or 3/C MIND paper insulated cables.
QUALITY ASSURANCE ________________
• The Company has been assessed by third party and found in conformity with the requirements of the standard ISO 9001-EN 29001.
Technical information subject
to change without notice. EPJM/EC-1C - July 2010 - 1 / 2 MV JOINTS MEDIUM VOLTAGE
UP TO 19/33 (36)kV
ELASTIC STRAIGHT THROUGH JOINT
For polymeric cables - with mechanical connector
REFERENCE: EPJM/EC-1C 4 1 2 3
6 5
DESCRIPTION SELECTION GUIDE ____________________
Rep 1 Mechanical connector. 1. Select in the table below, the kit model corresponding to The connector has a wide range of the insulation voltage U (in kV: 12 – 17.5 - 24 - 36), application: multi-sections, aluminium or the diameter over insulation, over outer sheath and the copper and stranded or solid conductor. diameter over conductor: The connector is supplied with an adhesive protective aluminium sheet. Conductor Max OD Min OD size Voltage sheath insulation mm² KIT reference Um Rep 2 High permittivity mastic. mm (*) mm (for guidance only) 34 17.2 70 - 120 EPJM/EC-1C-12-D Rep 3 Joint body. 38 19.0 95 - 150 EPJM/ EC -1C-12-E It maintains a permanent and uniform contact 12 kV 48 23.1 185 - 300 EPJM/ EC -1C-12-F pressure on the cables interfaces. 50 24.4 240 - 400 EPJM/ EC -1C-12-H 57 27.8 Please EPJM/ EC -1C-12-IP Electrically tested in factory after extrusion. It 67 31.9 consult us EPJM/ EC -1C-12-I includes: 34 17.2 70 EPJM/ EC -1C-17-D - Stress relief layer, 38 19.0 70 - 120 EPJM/ EC -1C-17-E 48 23.1 150 – 240 EPJM/ EC -1C-17-F - Insulation layer, 17.5 kV 50 24.4 185 - 300 EPJM/ EC -1C-17-H - Outer semi-conducting layer. 57 27.8 240 - 400 EPJM/ EC -1C-17-IP Please All the cables layers are rebuilt. 67 31.9 consult us EPJM/ EC -1C-17-I 34 17.2 25 - 50 EPJM/ EC -1C-24-D Rep 4 Joint screen. 38 19.0 50 - 95 EPJM/ EC -1C-24-E 48 23.1 95 - 240 EPJM/ EC -1C-24-F Tubular copper braid connected on cable 24 kV 50 24.4 120 - 300 EPJM/ EC -1C-24-H screens with constant force springs. 57 27.8 185 - 400 EPJM/ EC -1C-24-IP Please 67 31.9 EPJM/ EC -1C-24-I consult us Rep 5 Elastic outer protection. 50 24.4 50 - 150 EPJM/ EC -1C-36-H Extruded EPR rubber, it maintains a permanent 36 kV 57 27.8 95 - 300 EPJM/ EC -1C-36-IP and uniform contact pressure on the cables 67 31.9 185 - 400 EPJM/ EC -1C-36-I (*) including screen continuity device outer sheath. It ensures mechanical protection, watertightness and UV resistance of the joint. 2. Specify insulation voltage U in kV: 12 - 17 - 24 - 36 Rep 6 Identification label. 3. Select the screen continuity device according to the type of metallic screen of cable: Self-eject carrier tube. Single self-eject carrier tube made of two Earthing Device Type of Metallic parts. All the joint components are pre-loaded Reference Screen of Cable on it. T1 polylam T2 Copper tape T3 Copper wires
4. Select the packing one phase P1 or three phases P3
EXAMPLE OF ORDER _____________________ 20 kV single core polymeric insulated cable, with wire screen, aluminium conductor, 1 x 150 sqmm, OD over insulation 26.0mm, OD over outer sheath 39.0mm, kit for one phase : EPJM/EC-1C-24-F-T3-P1
Technical information subject
to change without notice. EPJM/EC-1C - July 2010 - 2 / 2