Professional Documents
Culture Documents
Assignment
Assignment
COLLEGE OF ENGINEERING
ENGR 120: Engineering workshop/
MECH 223: Workshop I
ASSIGNMENT
1.2 Scriber consist of a rod of steel that has been ………………………to a point at one ends or
both ends.
1.8 The sizes of the ……………………………… are specified by distance across flat of a nut.
1.9 ……………………………….. come as an open-end from one side and closed/ring end from
the other side.
1.12 A …………………………is designed to tighten its grip on the part being rotated.
Question 2: Answer the following questions
7
8
10
11
12
13
14
Section B
1.1 The assembly of parts after bringing the dimension or shaped to a required size is
known as ……………………………..
1.4 A device fitted to the bench with the help of nuts and bolts to carry out important work
is …………………………….
1.6 ……………………….. is used to measure the outside dimension of round flat square
components as well as the inner side of the hole and bore.
2.3 Name any four marking tools used in the fitting shop.
2.4 Name two different types of Hacksaw used in fitting.
2.5 Name any five types of files on the basis of shape and size.
1.1 Welding is the process of joining two similar or dissimilar metals by ………………..
1.5 A welding process in which an electric arc between electrode and workpiece is known
as …………………………………..
1.8 ………………………………. is used for protection of eyes and supervision of weld bed.
1.9 Operators wear the …………………….. to keep away the exposure of direct heat to the
body.
1.10 Electrode holders are available in sizes that range from …………………………………..
Question 2: Answer the following questions
SR NO Tool Name
1