Professional Documents
Culture Documents
Quattroporte Water Oil Pump
Quattroporte Water Oil Pump
4200 cc DUOSELECT
WORKSHOP MANUAL
Section 01.61 - 1
Procedure N. 01.61.001 - 00 Time: 8.05 h
3.
01.00.004 - RH ENGINE MOUNTING BRACKET-Removal/refitting or replacement
4. Undo the three retaining screws and detach the rigid union of the water pump line.
https://techdocplus.maserati.com/tdm/workshop-manual/doc?drw=174&st=88286&pos=1&doc=60897&opt= 1/4
17.01.2020 Maserati TechDOC
5. Undo the screws that secure the water/oil pump to the engine crankcase and remove it..
6. Use the specific wrench 900027150 to undo the upper retaining screws.
Refitting
7. Check the condition of the oil-water pump verifying that there is no leakage from the draining holes.
8. Check the groove on the oil/water pump shaft for wear.
https://techdocplus.maserati.com/tdm/workshop-manual/doc?drw=174&st=88286&pos=1&doc=60897&opt= 2/4
17.01.2020 Maserati TechDOC
13. Tighten the pump retaining screws to a torque of 25 Nm, using tool 900027150 for the upper retaining screws.
14. Connect the rigid union of the water pump line tightening the three retaining screws.
16.
01.00.004 - RH ENGINE MOUNTING BRACKET-Removal/refitting or replacement
Open the engine coolant tank cap and pour in the fluid until it reaches the MAX notch marked on the tank.
https://techdocplus.maserati.com/tdm/workshop-manual/doc?drw=174&st=88286&pos=1&doc=60897&opt= 3/4
17.01.2020 Maserati TechDOC
17. Working from inside the vehicle, use the control panel to manually set the air conditioning/heating system maximum temperature (+32°C), for both the driver and
passenger sides.
18. This operation allows the engine coolant to flow in and out the heating/air conditioning system.
https://techdocplus.maserati.com/tdm/workshop-manual/doc?drw=174&st=88286&pos=1&doc=60897&opt= 4/4