Professional Documents
Culture Documents
rcsubs@seznam.cz www.rcsubs.cz
TIP S
.RC UBS
W
.C
WW
rcsubs@seznam.cz www.rcsubs.cz
Description of patrs PE
G9
G9
G9
G8 G9
G8
rcsubs@seznam.cz www.rcsubs.cz
Deck A
rcsubs@seznam.cz www.rcsubs.cz
Deck B
wire 0.5 mm
wire 0.5 mm
rcsubs@seznam.cz www.rcsubs.cz
Deck C
rcsubs@seznam.cz www.rcsubs.cz
Hull -forming etchings
For a better shaping of etching, it is necessary to heat up plate and then rapidly cool down.
etching is soft and well shaped according to the shape of the hull.
Recommendation: Try these steps to shape a different part of the sheet (the rest).
1. 2. 3.
Remove
rcsubs@seznam.cz www.rcsubs.cz
WWW.RCSUBS.CZ
Hull -forming etchings
For a better shaping of etching, it is necessary to heat up plate and then rapidly cool down.
etching is soft and well shaped according to the shape of the hull.
Recommendation: Try these steps to shape a different part of the sheet (the rest).
1. 2. 3.
Hull 1.
fine melting to determine the
outline etching (using solder) 2. formation of holes using a
milling machine 3.
melting etching into the
hull
WWW.RCSUBS.CZ
1. 2. 3.
fine melting to determine the formation of holes using a
1. outline etching (using solder) 2. milling machine 3.
melting etching into the
hull
WWW.RCSUBS.CZ
WWW.RCSUBS.CZ
rcsubs@seznam.cz www.rcsubs.cz
Hull
1. 2. 3.
For a better shaping of etching, it is necessary to heat up plate and then rapidly cool down.
etching is soft and well shaped according to the shape of the hull.
Recommendation: Try these steps to shape a different part of the sheet (the rest).
1. 2. 3.
4. gluing and kiting
WWW.RCSUBS.CZ
WWW.RCSUBS.CZ
rcsubs@seznam.cz www.rcsubs.cz
Tower
rcsubs@seznam.cz www.rcsubs.cz
Tower
rcsubs@seznam.cz www.rcsubs.cz
Tower
rcsubs@seznam.cz www.rcsubs.cz
Gun 20 mm Deck gun 88 mm
rcsubs@seznam.cz www.rcsubs.cz