Professional Documents
Culture Documents
Endotoq 42
Endotoq 42
In the PLC program below, after press ng X1 once and pull ng, how many t mes the X0 button s pressed, Y0 l ghts up
and when Y0 f rst l ghts, what w ll be the value of DT12 var able?
11 4 7,00 C
A:
X0 must be pressed 4 t mes, DT12 becomes 4
B:
X0 must be pressed 4 t mes, DT12 becomes 0
C:
X0 must be pressed 5 t mes, DT12 becomes 5
D:
X0 must be pressed 5 t mes, DT12 becomes 0
What s the log cal equ valent of the PLC program below?
12 4 6,00 B
A:
not(B) + (A.C)
B:
not(B)(A+C)
C:
not(B)(A+C)
D:
not(B)+(A+C)
https://onl ne.y ld z.edu.tr/?transact on=LMS.EDU.StudentEvaluat onQuest on.L stStudentEvaluat onQuest onForStudent/1371023 1/3
05.06.2021 Yıldız Tekn k Ün vers tes - Eğ t m Yönet m S stem
How does Motor_2 work f we pull our hand after press ng the Start button n the PLC program below?
13 4 7,00 C
A:
Motor_2 runs from 0 to 8 seconds, other t mes t stops
B:
Motor_2 runs from 4 to 8 seconds, other t mes t stops
C:
Motor_2 runs from 4 to 12 seconds, other t mes t stops
D:
Motor_2 runs from 8 to 16 seconds, other t mes t stops
When connect ng non-contact sensors to electr cal control c rcu ts, wh ch of the follow ng should be cons dered?
A:
Type of operat ng voltage (AC or DC)
B:
14 4 6,00 A
PNP and NPN
C:
Parelel attachments
D:
All of the above
https://onl ne.y ld z.edu.tr/?transact on=LMS.EDU.StudentEvaluat onQuest on.L stStudentEvaluat onQuest onForStudent/1371023 2/3
05.06.2021 Yıldız Tekn k Ün vers tes - Eğ t m Yönet m S stem
Wh ch of the follow ng should be the IEC address of the global var able w th FP address "X0" def ned as "Start"
below?
15 4 7,00 A
A:
%IX0.0
B:
%QX0.0
C:
%MX0.0.0
D:
%MW5.10
1 2 2 Gt
https://onl ne.y ld z.edu.tr/?transact on=LMS.EDU.StudentEvaluat onQuest on.L stStudentEvaluat onQuest onForStudent/1371023 3/3