Professional Documents
Culture Documents
Diesel
Generator set
QSK50
engine Series
1875kVA - 2250kVA 50Hz
Emissions regulated
Description
Cummins® commercial generator sets are fully Control system - The PowerCommand® digital
integrated power generation systems providing control is standard equipment and provides total
optimum performance, reliability and versatility genset system integration including automatic
for stationary Standby and Prime Power remote starting/stopping, precise frequency and
applications. voltage regulation, alarm and status message
display, AmpSentryTM protective relay, output
Features metering and auto-shutdown at fault detection.
Cummins heavy-duty engine - Rugged 4-cycle Cooling system - Standard integral set-
industrial diesel delivers reliable power, low mounted radiator systems, designedand tested
emission, and fast response to load changes. for rated ambient temperatures, simplifies
Alternator - Several alternator sizes offer facility design requirements for rejected heat.
selectable motor starting capability with low ISO8528 G3 Capable – Consult factory for
reactance windings, low waveform distortion related performance rating as per ISO8528-5
with non-linear loads and fault clearing
short- circuit capability. Warranty and service - Backed by a
comprehensive warranty and worldwide
Permanent Magnet Generator (PMG) - distributor network.
Offers enhanced motor starting and fault
clearing short circuit capability.
Bore 159 mm
Stroke 159 mm
Displacement 49.8 litres
Configuration Cast iron, V16 cylinder
Battery capacity 1800 amps minimum at ambient temperature of 0°C
Battery charging alternator 55A
Starting voltage 24 volts, negative ground
Fuel system Cummins YZ (XPI)
Fuel filter Two stage spin-on fuel filter and water separator system.
Air cleaner type Dry replaceable element
Lube oil filter type(s) Four spin-on, combination full flow filter and bypass filters
Standard cooling system High ambient cooling system
Alternator specifications
Design Brushless, 4 pole, drip proof, revolving field
Rotor Single bearing, flexible disc
Insulation system Class H
Standard temperature rise 150ºC
Exciter type Permanent Magnet Generator (PMG)
Phase rotation A (U), B (V), C (W)
Alternator cooling Direct drive centrifugal blower fan
AC waveform total harmonic distortion (THDV) No load to full linear load < 5% .For any single harmonic<3%
Telephone harmonic factor(THF) < 2% (for 50Hz)
Available voltages
60 Hz Line-Neutral/Line-Line 50 Hz Line – Neutral/Line – Line
• 220/380 • 230/400 • 240/415 • 254/440
• 6060/10500 • 6350/11000
Note: Some options may not be available on all models - consult factory for availability.
Dim “A” Dim “B” Dim “C” Set weight* Set weight*
Model mm mm mm dry kg wet kg
C1875D5E 5864 2248 2521 11217 11617
C2000D5EB 5864 2248 2521 11504 11903
C2250D5E 5864 2248 2521 11950 12350
*Note: Weights represent a set with LV standard features. See outline drawings for weights of other configurations.
©2023 Cummins Inc. All rights reserved. Cummins is a registered trademark of Cummins Inc. PowerCommand, AmpSentry, InPower and “Our energy working for you.” are trademarks of
Cummins Inc. Other company, product, or service names may be trademarks or service marks of others. Specifications are subject to change without notice.
EA_T_CC_27_CN (06/23)