Professional Documents
Culture Documents
Learning Objectives
9
Instructor Reference (Training Centre)
5. Explain function for each type of wiring fitting and accessories, such
as:
5.1 Switches (dimmer, remote control, time switch)
5.2 Sensors (photo cells, motion sensor, infra-red)
5.3 Power Point (S/S/ 13A)
7. Describe Electrical Act & Regulation and Standard guide for single
phase wiring, such as:
7.1 Energy Commission Act 2001,
7.2 Electricity Supply Act 1990 (Act 447),
7.3 Electrical Regulation 1994,
7.4 MS IEC 60364,
7.5 MS 1936: 2006 guide to MS IEC 60364,
7.6 MS 1979: 2007 Electrical Installation of Buildings – Code of
practice
7.7 Based on latest instruction by regulatory body
Learning Objectives
10
Instructor Reference (Training Centre)
Learning Objectives
4. Explain cable size relation with current carrying capacity and voltage
drop.
Learning Objectives
11
Instructor Reference (Training Centre)
Learning Objectives
3. List type of tools and equipment for single phase Distribution Board
(metallic or non-metallic) installation.
Duration: 24
Work Activity 6 Carry out fitting and accessories installation
hours
Learning Objectives
Duration: 16
Work Activity 7 Carry out wiring system visual inspection
hours
12
Instructor Reference (Training Centre)
Learning Objectives
Learning Objectives
Duration: 16
Work Activity 9 Carry out live circuit test
hours
Learning Objectives
13
Instructor Reference (Training Centre)
Learning Objectives
TOTAL
208 hours
(CU 2.1 : SINGLE PHASE WIRING)
14