Professional Documents
Culture Documents
Project setup (Folders structure, Isometric templates, databases, revision management, XML les con g…)
Material catalogues and spec loading (based on Client’s Piping Material Classes and Standards).
Point Cloud and reference models loading into our Plant 3D Project by using AutoDesk ReCap.
3D modeling of equipment, main steelwork and civils, and special piping items.
Piping routing and supporting of any system (incl. Jacketed or sloped lines...)
Ortho drawings (Piping plan, Piping support plan, steelwork and foundations equipment location drawing...)
Compliance with all the client’s requirements (pipeline routing and temperature and pressure conditions, material,
insulation, wind or seismic loads, etc…) and with the standard used (ASME B31.3, B31.1, B31.4, B31.8, CODETI,
EN13480, …)
Static analysis (to check over-stresses, ange leakages, nozzle loading, displacements, code compliance, reaction
forces reporting, etc…)
Dynamic analysis (modal analysis, time-history, water hammer, slug ow, etc…) when required.
To ease the piping supportation, we can produce the stress isometrics by using CAESAR II software (with custom data
and custom drawing border adapted to the client requirements), or even using a Plant3D style speci cally created to
allow connectivity with the information generated by CAESAR (loads, node numbers, support type and symbology,
etc…)
Piping supports (rigid, springs and special type) nal de nition and calculation.
Stress reports production (outputs from CAESAR II) or descriptive report when required.
fi
fl
fi
fi
fl
fi
How do we do?
Caesar II
How do we do?
Caesar II
How do we do?
Caesar II
How do we do?
Autodesk Navisworks Manage
Clash check.
www.eloraplantdesign.com
info@eloradsgns.com