Professional Documents
Culture Documents
122.E-SHOT Issue 122 - April 2021
122.E-SHOT Issue 122 - April 2021
worldwide
KMP Brand Quality Department has a library of several thousands of developed and
approved drawings and samples which are frequently referred to, along with our
extensive OEM Part Store, to ensure that all KMP Brand parts are manufactured to
the correct specification. Our department uses a selection of metrology techniques
1
and equipment throughout the development and quality control process, some of
which are shown below.
KMP is proud to announce the latest addition to the KMP Quality Department - new X-
Ray Fluorescence (XRF) Analyser. This high-tech, handheld piece of technology is
able to determine the material composition of many different types of components
through non-destructive spectroscopy, ensuring KMP Brand material specifications
are being met.
Co-ordinate
Measuring Machine
Our Co-ordinate
Measuring Machine
(CMM) is a robotic
machine used to
measure the geometry
and dimensions of our
parts such as pistons,
2
ring gears, crankshafts,
camshafts and valve
train components.
Digital Microscope
Mechanical Piston
Ring Tester
3
Crankshaft and Camshaft Analysis
Hardness Testing
Hardened components can be tested using either a Leeb Hardness Tester or the
4
Rockwell Hardness Tester to measure the hardness of valves, piston pins, cam
followers, crankshaft/camshaft journals, valve seats etc.
Digital Micrometers
The dimensions of
smaller engine parts are
measured using
calibrated digital
micrometers.
Shadowgraph
The shadowgraph is
used to analyse part
profiles and is beneficial
in the measurement of
valve angles and piston
ring profiles.
5
Shore durometer
We use a shore durometer which measures the hardness of rubber materials like
gaskets and seals to aid in our development process.
6
KM Products Europe Ltd KMP * USA LLC Miami KMP * USA LLC Houston
sales@kmpbrand.com salesus@kmpbrand.com salesus@kmpbrand.com
KMP House 1728 N.W. 82nd Ave, 1234 North Post Oak Road
Hanworth Lane Business Park Doral, Florida Suite 130, Houston, Texas
Hanworth Lane - Chertsey 33126 USA 77055 USA
Surrey KT16 9JX - England
Tel: +1 786 502 3644 Tel. +713 683 6160
Tel: +44 1932 571991
All original equipment, manufacturer’s names, part numbers, symbols, drawings, colours and descriptions are for reference purposes
only, and it is not implied any part is that of these manufacturers.
7
Continuing to provide quality parts and exceptional service
worldwide
KMP Brand Quality Department has a library of several thousands of developed and
approved drawings and samples which are frequently referred to, along with our
extensive OEM Part Store, to ensure that all KMP Brand parts are manufactured to
the correct specification. Our department uses a selection of metrology techniques
1
and equipment throughout the development and quality control process, some of
which are shown below.
KMP is proud to announce the latest addition to the KMP Quality Department - new X-
Ray Fluorescence (XRF) Analyser. This high-tech, handheld piece of technology is
able to determine the material composition of many different types of components
through non-destructive spectroscopy, ensuring KMP Brand material specifications
are being met.
Co-ordinate
Measuring Machine
Our Co-ordinate
Measuring Machine
(CMM) is a robotic
machine used to
measure the geometry
and dimensions of our
parts such as pistons,
2
ring gears, crankshafts,
camshafts and valve
train components.
Digital Microscope
Mechanical Piston
Ring Tester
3
Crankshaft and Camshaft Analysis
Hardness Testing
Hardened components can be tested using either a Leeb Hardness Tester or the
4
Rockwell Hardness Tester to measure the hardness of valves, piston pins, cam
followers, crankshaft/camshaft journals, valve seats etc.
Digital Micrometers
The dimensions of
smaller engine parts are
measured using
calibrated digital
micrometers.
Shadowgraph
The shadowgraph is
used to analyse part
profiles and is beneficial
in the measurement of
valve angles and piston
ring profiles.
5
Shore durometer
We use a shore durometer which measures the hardness of rubber materials like
gaskets and seals to aid in our development process.
6
KM Products Europe Ltd KMP * USA LLC Miami KMP * USA LLC Houston
sales@kmpbrand.com salesus@kmpbrand.com salesus@kmpbrand.com
KMP House 1728 N.W. 82nd Ave, 1234 North Post Oak Road
Hanworth Lane Business Park Doral, Florida Suite 130, Houston, Texas
Hanworth Lane - Chertsey 33126 USA 77055 USA
Surrey KT16 9JX - England
Tel: +1 786 502 3644 Tel. +713 683 6160
Tel: +44 1932 571991
All original equipment, manufacturer’s names, part numbers, symbols, drawings, colours and descriptions are for reference purposes
only, and it is not implied any part is that of these manufacturers.
7
Continuing to provide quality parts and exceptional service
worldwide
KMP Brand Quality Department has a library of several thousands of developed and
approved drawings and samples which are frequently referred to, along with our
extensive OEM Part Store, to ensure that all KMP Brand parts are manufactured to
the correct specification. Our department uses a selection of metrology techniques
1
and equipment throughout the development and quality control process, some of
which are shown below.
KMP is proud to announce the latest addition to the KMP Quality Department - new X-
Ray Fluorescence (XRF) Analyser. This high-tech, handheld piece of technology is
able to determine the material composition of many different types of components
through non-destructive spectroscopy, ensuring KMP Brand material specifications
are being met.
Co-ordinate
Measuring Machine
Our Co-ordinate
Measuring Machine
(CMM) is a robotic
machine used to
measure the geometry
and dimensions of our
parts such as pistons,
2
ring gears, crankshafts,
camshafts and valve
train components.
Digital Microscope
Mechanical Piston
Ring Tester
3
Crankshaft and Camshaft Analysis
Hardness Testing
Hardened components can be tested using either a Leeb Hardness Tester or the
4
Rockwell Hardness Tester to measure the hardness of valves, piston pins, cam
followers, crankshaft/camshaft journals, valve seats etc.
Digital Micrometers
The dimensions of
smaller engine parts are
measured using
calibrated digital
micrometers.
Shadowgraph
The shadowgraph is
used to analyse part
profiles and is beneficial
in the measurement of
valve angles and piston
ring profiles.
5
Shore durometer
We use a shore durometer which measures the hardness of rubber materials like
gaskets and seals to aid in our development process.
6
KM Products Europe Ltd KMP * USA LLC Miami KMP * USA LLC Houston
sales@kmpbrand.com salesus@kmpbrand.com salesus@kmpbrand.com
KMP House 1728 N.W. 82nd Ave, 1234 North Post Oak Road
Hanworth Lane Business Park Doral, Florida Suite 130, Houston, Texas
Hanworth Lane - Chertsey 33126 USA 77055 USA
Surrey KT16 9JX - England
Tel: +1 786 502 3644 Tel. +713 683 6160
Tel: +44 1932 571991
All original equipment, manufacturer’s names, part numbers, symbols, drawings, colours and descriptions are for reference purposes
only, and it is not implied any part is that of these manufacturers.
7
Continuing to provide quality parts and exceptional service
worldwide
KMP Brand Quality Department has a library of several thousands of developed and
approved drawings and samples which are frequently referred to, along with our
extensive OEM Part Store, to ensure that all KMP Brand parts are manufactured to
the correct specification. Our department uses a selection of metrology techniques
1
and equipment throughout the development and quality control process, some of
which are shown below.
KMP is proud to announce the latest addition to the KMP Quality Department - new X-
Ray Fluorescence (XRF) Analyser. This high-tech, handheld piece of technology is
able to determine the material composition of many different types of components
through non-destructive spectroscopy, ensuring KMP Brand material specifications
are being met.
Co-ordinate
Measuring Machine
Our Co-ordinate
Measuring Machine
(CMM) is a robotic
machine used to
measure the geometry
and dimensions of our
parts such as pistons,
2
ring gears, crankshafts,
camshafts and valve
train components.
Digital Microscope
Mechanical Piston
Ring Tester
3
Crankshaft and Camshaft Analysis
Hardness Testing
Hardened components can be tested using either a Leeb Hardness Tester or the
4
Rockwell Hardness Tester to measure the hardness of valves, piston pins, cam
followers, crankshaft/camshaft journals, valve seats etc.
Digital Micrometers
The dimensions of
smaller engine parts are
measured using
calibrated digital
micrometers.
Shadowgraph
The shadowgraph is
used to analyse part
profiles and is beneficial
in the measurement of
valve angles and piston
ring profiles.
5
Shore durometer
We use a shore durometer which measures the hardness of rubber materials like
gaskets and seals to aid in our development process.
6
KM Products Europe Ltd KMP * USA LLC Miami KMP * USA LLC Houston
sales@kmpbrand.com salesus@kmpbrand.com salesus@kmpbrand.com
KMP House 1728 N.W. 82nd Ave, 1234 North Post Oak Road
Hanworth Lane Business Park Doral, Florida Suite 130, Houston, Texas
Hanworth Lane - Chertsey 33126 USA 77055 USA
Surrey KT16 9JX - England
Tel: +1 786 502 3644 Tel. +713 683 6160
Tel: +44 1932 571991
All original equipment, manufacturer’s names, part numbers, symbols, drawings, colours and descriptions are for reference purposes
only, and it is not implied any part is that of these manufacturers.