Professional Documents
Culture Documents
Manual SIWAREX WP521 WP522 en - PDF Page 108
Manual SIWAREX WP521 WP522 en - PDF Page 108
6.18.1 Overview
If a digital output is defined in data record DR 7 for control with data record DR 18 (see
Assignment for digital output 0, 1, 2, 3 (Page 89)), you can control this output with data
record DR 18. Transfer is always for all four digital outputs. Only outputs which have been
configured for control via DR 18 (see DR7 interface parameters (Page 86)) are activated or
deactivated according to the content of data record DR 18.
Procedure
● Check or adapt the desired parameter settings of the digital outputs in data record 7
● Define the value for digital output 0, 1, 2, 3
● Transfer the data record to the scales
SIWAREX WP521/WP522
108 Manual, 04/2016, A5E36695225A