Professional Documents
Culture Documents
FEATURES & FUNCTIONS
LCD Sync Fail LED
4 Lines X 20 Characters Backlight LCD This LED is on, when the phase angle difference between source-side
Setting & Configuration, Measurement & Monitoring Display voltage (Va) and load-side voltage (Vr) is beyond the preset value. Sync
With enclosure door closed, LCD & LED's are off to save power. Fail information as well as Open Line Detection is used together before
Close Control. In Sync Fail case, Close control command should be
TThesehesse LED's
LE
ED'ss indicate
indiicatee if source-side
sourcce-side d andand load-side
load--sidee lines
linees are
arre energized
ennergizedd or
nnot.
ot. LED's
LED's
D arearre onn when
whhen each
eachh of theh line voltages
voltages
g goess up the preset presset
V oltaage On
Voltage On Level
Leveel andandd LED's
LE
ED's
D s are
are off
o when
whenn 3-phase
3-pphase voltages
vooltagegese gogo down
doown
Voltage
V oltaage Off
Offf Level.
evel. Voltage
LLeve l g On Level
Voooltage vell and
Leeve and Voltage
Volttage Off Level
V Leveeell are
arree also
alsssoo used
usssed
ed
ffor
or Open
Open Linee Detection
Deete
tect
cttion (Phase
(Phaase Loss),
Loso s), in which
whiichh function
ffunct
fuu tion source-side
ssourcce-side iid and
a d
load-side
load-
o -sidee lines
linees are
arre detected
deetectctted
e to
to bee open
opeen when
whenn theth linee voltage a
ggoes
oess down
dowwn Voltage
Voltltaaggee Off
Off Level,
Levevell, but
butt once
ooncce after
affter open
openn line,
neee, Open
line Opppenen Linee
D eteectionn is reset
Detection rreseet only
only when
whhen the he line
linee voltage
v ltaage goes
vo goess upp Voltage
Volt
Vooltttage
tag
age On Level. Levvel.
RECLOSER
Recloser Control
Technical Data
Fault Detection
Phase & Ground Fault Over Votage
Pickup Level : 10~2000A (step:1A) Pickup level : 1.05~1.50pu (step:0.01pu)
Fast TC Curve : 50 types (ANSI,IECmRecloser) Delay Time : 0.1~180.0 sec (step:0.1sec)
Fast Multiplier : 0.05~2.00 (step:0.01)
Fast Time Add : 0.00~1.00 (step:0.01sec) Under Frequency
Fast Min Responese : 0.00~1.00 (step :0.01sec)
Pickup level : 47.00~59.98Hz (step:0.01Hz)
Delay TC Curve : 50 types (ANSI,IECmRecloser)
Delay Time : 0.03~10.00sec (step:0.01sec)
Delay Multiplier : 0.05~2.00 (step:0.01)
Delay Time Add : 0.00~1.00 (step:0.01sec)
Over Frequency
Delay Min Responese : 0.00~1.00 (step :0.01sec)
Pickup level : 52.02~63.00Hz (step:0.01Hz)
Direction Detection Delay Time : 0.03~10.00sec (step:0.01sec)
3V1 threshold : 0~100% (step:1%)
3I1 threshold : 0~100% (step:1%) Negative Sequence Overcurrent(Broken conductor)
3I1 Angle : 0~359° (step:1°) Pickup I2 / I1 level : 30.0 ~ 100.0 (step: 1%)
I2 / I1 delay time : 0.01 ~ 100.0 (step : 0.01sec)
High Current Trip (HCT)
Phase-HCT Pickup Leve : 25~10000A (step:1A) 4 Setting Groups
Phase-HCT Adder : 0.01~1 (step:0.01sec)
Ground-HCT Pickup Leve : 25~10000A (step:1A) Each group saves individual setting values
Ground-HCT Adder : 0.01~1 (step:0.01sec) for different situations.
Active Setting Group Selection: 1~4
Delay Time Current Trip
Phase-HCT Pickup Leve : 25~10000A (step:1A) Inter lock
Phase-HCT Adder : 0.01~2 (step:0.01sec)
Live Load block
Ground-HCT Pickup Level : 25~10000A (step:1A)
Sync fail block
Ground-HCT Adder : 0.01~2 (step:0.01sec)
Openn Line
O LLin
innnee (Loss
(LLos
osss off Phase)
Phase) Detection
Deeete
teecct
ctio
tio
iionn Phase
Phas
P sse Rotation
Rotaaationn
R :A
A-B-C
C or A-C-B
C
Voltage
Volt
V tag
agge On
O Level:
Leeevel
el:: 50~90%
5 ~~90%
50 % (step:
(stttep: 5%)
5% %) of rated
r d voltage
voltttage Sta
S atu
a us Monitoring
u
Status Mo
on
onito
n ori g
o
Voltage
Volt
V t gge Off
ltltag O Level:
LLeeevell: 35~75%
35 % (step:
35~~~75%
75% ((ssttep: 5%)%) off rated
% r t d voltage
voltltttage
Deelayy Time:
Delay
D Tim 0.1~30.0
me: 00.1~3
m 1 3030.00 secc (step:
((st ssec)
steeep: 00.11 seeec)
c) Opeeen / C
Op
Open
O Closed
Closssed : Swi
Sw
Switch
i Body
itch B Operated
p t St S
Status
Loca
Lo
LLocal
oca
caal / R Remote
Rem
Remmotee
mote : Con
Control
nntrol Position
s n
Synccchr
Synchronism
S h onism
hr
hro m Check
Cheecck Handle Lock
Handle
H Loccck : Sw
Switch
witch Body
w d Handle
a e Lock
Locking
o (Control Blocked)
Sync
S ync Fail
F il Phase
Phhaas
asee Difference:
Diffff rrenccce: 5~60°(step:
Diffe
Di
D 5~60°(
6 °(ste
60 °( teep: 1°)
1°)) Gas Pressure
G Preeessuuure LowL w : SF SF6
F6 Gas a Insulated
n a Switc Switch
t only(Control Blocked)
Delayy Time:
D Tim
me: 00.1
m 0.1~30.0 (step:
1~33300.00 secc (step
(ste
ep:
eep
p: 00.
0.11 se
sec)
eec) Door Open
Door
D Opppen : Co
Control
ntroll Boxx Enclosure
s Do Door Open
Opeeen Li
Open
O Line
ine (Loss
(Lossss of
o Phase
Phase)
Phhhaseee) Detected
D c d : A / B / C, R / S / T
Undeeer Voltage
Under
U Voltagee Hot (Live)
H (Livve) Line
L Tagg : Sourc
Source-side
r / Load-side
Pickup
P ickup level
levvvel : 0.03~0.95pu
0.0
.033~0.9995puu (step:0.01pu)
((steepp:00.0
.01p
011ppu)) Phasse Sync
Phase
P S c FailFaaail :VVa - VVr
Delayy Time
D Tim
me : 00.1
m 1~~180
180..00 sec
0.1~180.0 seeec (step:0
(s
ssteep::0.11ssec)
(step:0.1sec) FFI (Fault
(FFFault Indication)
Indddicaaationnn)
Technical Data
Control Recording
Local / Remote : Control Position (only locally changeable) Events
Open/Close : Switch Body Status Change Command Totally more than 32,000 events are stored and listed.
DO (Direct Operate) and SBO (Select Before Operate) are supported. I/O events (1024) / Functional events (1024,30000) / System events(256)
Reset : Annunciator Manual Reset Command Fault events (256) /PQM event(256) / Demand profile I,P,Q (6144) /
Battery Test : Battery & Charger Circuit Check Maximum demand profile (1024)
RMS & Phase Angle : Ia, Ib, Ic, In, I1, I2, I0
Averaging Interval: 5 / 10 / 15 min
Graphical Display in Analysis Tool
Tr u e RM S : I a, I b , I c
L ast Fau lt Current : I a, I b , I c, I n , I o
Accu r acy : 0.25% or 1A
Others
Read in g Ran g e : 4 ~1 2 5 0 0 A
RTC (Real Time Clock) : YYYY/MM/DD hh:nn:ss
Voltage
SOE (Sequence of Event) Time Resolution : 1 msec
RMS (Source, kV) & Phase Angle (Deg) : Va, Vb, Vc, Vo, V1, V2
Digital Filtering & Dead-band Setting for Analog Inputs
RMS (Load, kV) & Phase Angle (Deg) : Vr, Vs, Vt, Vo, V1, V2
Calibration (Correction Factor) : Factory Setting only
True RMS (Source & Load, kV): Va, Vb, Vc, Vr, Vs, Vt
Ia, Ib, Ic, In, Va, Vb, Vr, Vs, Vt
Va-Vr Phase Angle Difference (Deg)
Factor Magnitude aG0 U5 0 0 ~1 .5 0 0
L ast Fau lt ( V) :Vo
Phase Angle aG0 U0 0 0 ~3 5 9 .9°
Accu r acy : 0.25%
Power Factor
A-phase, B-phase, C-phase and 3-phase
L ead / L ag : L ead = 1
Accu r acy : 0.25% or 1°
Frequency : 45~65 Hz
Power
A-phase, B-phase, C-phase and 3-phase
Active (kW), Reactive (kVAR), Apparent (kVA)
Accuracy: 0.5%
Energy
A-phase, B-phase, C-phase and 3-phase: kWh, kVARh (Import & Export)
Counter
FRTU Restart Count, Switch Trip (Open) Count
Fault Count (A / B / C / N), Total Fault Count
Harmonics
Ia, Ib, Ic, In and I3ph THD (%)
Source-side Va, Vb, Vc and V3ph THD (%)
Load-side Vr, Vs, Vt and V3ph THD (%)
2nd~32nd Harmonics (A, kV) : Ia, Ib, Ic, In, Va, Vb, Vc, Vr, Vs, Vt
VOC (Value Of Change) : VOC (AI / Counter), VOC Limit (AI)
RECLOSER
Recloser Control
General Specifications
Power Source Inputs
AC 127 / 220V (50 or 60 Hz)
Transformer Output : AC 30V, 500VA
Power Supply Unit
Input Voltage : AC 30V, Output Voltage : DC 24V
Battery Charging Voltage : 27V (Temperature Compensated)
Block Overcharge : 32V, Block Overdischarge : 20V
Battery Check & Charger Circuit
Battery
Output : DC 24V
Capacity : 18 amp-hour at +25 C
Run Time : over 36 hrs without AC power
Switch Control : over 20 times without AC power
Recharging Time : within 10 hrs after full discharge
Life Guarantee : 5 years
Construct
Enclosure of EPIC R300 is designed to operate normally under the high / low temperature and humid environmentst
by adopting duplicate and double structure with air gap and by adiabatic treatment. And, the inner door enhances operational
safety. Without opening the inner door, Recloser can be manipulated and operated. For the purpose of maintenance, with the inner doo
opened and hinged, batteries, modem, analog modules and other parts can be handled directly.
FRTU
Power SW
Door Open SW
Power/Control
Receptacle
RECLOSER
Recloser Control
450
435
27 266 22
268
225 137
182
BACK SUPPORT
18
15
DOOR
93
PACKING
150
193
313
INNER PANEL
447
569
610
BODY
669
A-A”
760
906
0˚
12
MS CONNECTOR
MODEM
A-A” CABLE
HOLE
50
475 315
RS232C(SCADA PORT)
V6 V4 V_COM V_COM V2
RS232C RS232C
RS485 Port (SCADA Port)
DO (Control) Connector
ETHERNET Connector
AI(Voltage) Connector CURRENT
DO5- DO5+ DO4- DO4+ DO3- DO3+ DO2- DO2+ DO1- DO1+ DI6 DI5 DI_COM1 DI4 DI3 DI2 DI1
(Rec Open) (Rec Open) (Bat Test-) (Bat Test+) (Close-) (Close+) (Open-) (Open+) (Door Open) (Charger Fail) (Batt Low) (AC Loss) (Close) (Open) FG FG
Technical Data
Epic R300 have a dedicated setting & configuration, operation, and analysis tool, FRTU_SET_TOOL. This tool is used for setting
value change, FRTU firmware download, SCADA communication monitor, recorded data upload & graphical display (event, fault,
and demand), and monitoring (staus and measurement) & control, especially in local site, through RS232 port on FRTU front panel
using Modbus protocol. Besides, for remote operation before SCADA or DA system installation, one-to-one connection between
the tool and FRTU, In this sense, the remote operation purpose is simple SCADA implementation for tele-metering, status
monitoring, and remote control of switches through RS232 SCADA port on the left side of FRTU using DNP or IEC protocol, and
modem control & dial-up functions are also supported.
Measurement