Professional Documents
Culture Documents
ES10RG
(Rigid Photo luminous sign)
Engineered Labelling Solutions
www.elabellingsolutions.com
ES10RG (Rigid Photo luminous sign) is made of printed graphics between 10% Ammonia Gasoline
layers of chemical-resistant plastic. The top layer is a semi-rigid UV-resistant
10% HCL Grease and Oils
film with additional protective liner to ensure abrasion protection. The substrate
or base material is a photo luminous PVC film. Machine pressed to the 10% NaOH Heptane
Physical Characteristics
50% Sodium Hydroxide Kerosene
Total Thickness: 3.80 mm thick including the adhesive backing 20% Sodium Carbonate Organic Solvents
Overlaminate Material: 250 micron (0.25 mm) thick Polyethylene 5% Alconox® Detergent PH 4
Terephthalate (PET) clear film with protective layer to remove after installation. 409® Degreaser PH10
Substrate/base Material : 260 micron (0.26 mm) photo luminous PVC film. 5% Acetic Acid Propylene Glycol
IMO compliant luminosity 10% Salt Water Solution Rust Veto® 377
Luminance after 10 min: 40 mcd/m 2 50% Salt Water Solution SAE 20 Oil
Luminance after 60 min: 4 mcd/m 2 Alkalis Speedi Kut Cutting Oil 332
The above information on physical characteristics is based on certain tests conducted by our
company. The values are intended only as a source of information and are given without guarantee
and do not constitute a warranty. Purchasers should independently determine, prior to use, the
suitability of this material for their specific application.