Professional Documents
Culture Documents
KG Bunny Eng-La Mamama Toys - Olesya Baigacheva Baygacheva
KG Bunny Eng-La Mamama Toys - Olesya Baigacheva Baygacheva
BUNNY
Designer Olesya Baygacheva
MATERIALS
Yarn:
YarnArt Jeans (160 m/50 g)
color 05 (beige) or 87 (dark beige) 1/2 of skein for head, arms and legs
color 03 (cream) 1/2 of skein for pajamas
color 29 (light green) small amount for cuffs, collar and vertical bar
color 85 (orange) small amount for carrots
color 52 (green) small amount for carrots
color 70 (brown) small amount for details
OTHER MATERIALS
ABBREVIATIONS
2
NOTES
Using this pattern you will crochet a cute bunny.
The toy pieces are crocheted in continuous non-joining rounds (unless otherwise
stated).
This pattern doesn’t include any crochet lessons. You must know how to crochet
main stitches.
Skill level - intermediate.
The size of the finished toy when using the indicated materials is about 27 cm
(10,62 inch) taking into account ears height.
My stitches have a semi X-shape. If your stitches have V-shape, then your toy will
be bigger.
The legs and a body are crocheted as one piece. The arms are attached when
crocheting a body.
I used wire for the arms but it’s optional.
3
Embroidery of carrots
For embroidery I use orange thread YarnArt Jeans. Divide the thread into 4 thin
strands and use 2 of 4.
Embroidery must be done before you stuff the part, so the stuffing will not get
knocked out and drag on the needle during the embroidery process.
When doing embroidery, do not tighten the knots too tightly; you should end up
with a long and voluminous carrot (the length of the orange part is approximately
5 mm).
I do not cut the thread after embroidering each element, but stretch it inside the
part to the place where I will embroider the next carrot.
First we embroider all the orange parts, and only then the green “tails”.
I embroidered carrots randomly. You can place them more often or less often at
your discretion.
4
INSTRUCTIONS
5
Head
(in beige color)
Rnd 1. 6 sc in mr (6)
Rnd 2. (inc) x 6 (12) 1
Rnd 3. (1 sc, inc) х 6 (18)
Rnd 4. (2 sc, inc) х 6 (24)
Rnd 5. (3 sc, inc) х 6 (30)
Rnd 6. (4 sc, inc) х 6 (36) 1 23
Rnd 7. (5 sc, inc) х 6 (42)
Rnd 8. (6 sc, inc) х 6 (48)
Rnd 9. (7 sc, inc) х 6 (54)
2
Rnd 10-11. 54 sc (54) 2 rounds
Rnd 12. (8 sc, inc) х 6 (60)
Rnd 13-20. 60 sc (60) 8 rounds
Rnd 21. 10 sc, (inc) x 3, 7 sc, (inc) x 3, 37 sc (66)
Rnd 22-23. 66 sc (66) 2 rounds 456
Rnd 24. (9 sc, dec) x 6 (60)
Rnd 25. (8 sc, dec) х 6 (54)
Rnd 26. (7 sc, dec) х 6 (48)
Rnd 27. (6 sc, dec) х 6 (42) 3
6
Ears
(make 2, in beige color, don’t stuff)
Rnd 1. 6 sc in mr (6)
Rnd 2. (inc) x 6 (12) 5
Rnd 3. 12 sc (12)
Rnd 4. (1 sc, inc) x 6 (18)
Rnd 5-10. 18 sc (18) 6 rounds
Rnd 11. (1 sc, dec) x 6 (12)
Rnd 12. 12 sc (12)
Rnd 13. (2 sc, dec) х 3 (9)
Rnd 14. Fold the ear in half and work 4 sc through
two layers (4)
7
Head details
The beginning and the end of all threads are located in the head opening. I tie all
thread tails in knots and cut the ends after all the head details are made.
1 2
3
4 6 7 8
9 10 11
Embroider the nose with brown thread YarnArt Jeans. Divide it into 4 thin strands and
use 1 strand. Place two pins in the center under Rnd 20 (count the rounds from the
top), with a distance of 2 sts between the pins. Place the third pin in the center under
Rnd 21, the fourth under Rnd 23. Pic. 6
Using a needle, insert the thread into the hole on the head, bring it out at point 3,
insert it at point 1 and bring it out at point 2, insert it at point 3 and bring it out at
point 4, insert it at point 3 and bring it out into the hole on the head. Pic. 7-11
8
Make shaping for the eyes.
12
Use the thread of the beige color YarnArt Jeans. Using
a needle, insert the thread into the hole on the head,
. .
2
1
3
4
bring it out at point 1, insert it at point 2 and bring it
out at point 3, insert it at point 4 and bring it out into
the hole on the head. Tighten the ends of the threads
well and fix them with a knot. Pic. 12
13 14 15
Embroider the eye whites with the thread of cream color. Pic. 13-15
5 sc
16 17 18
Embroider the eyebrows above the eyes with brown thread YarnArt Jeans. Divide it
into 4 thin strands and use 1 strand. Pic. 16
9
Arms
(make 2)
Prepare the wire for the arms. We need two pieces in lenght about 15 cm. (My wire
was thin, so I used 30 cm long pieces, folding them in half, so the length of each
piece was 15 cm). Bend one end of the wire on both pieces so that the length
becomes approximately 13-14 cm. Pic. 19 Wrap it with a masking tape or with
adhesive tape as shown in the pic 20.
19 20
Rnd 1. 4 sc in mr (4)
Rnd 2. (inc) x 4 (8) 21
Rnd 3. (inc) x 8 (16)
Rnd 4-6. 16 sc (16) 3 rounds
Rnd 7. (6 sc, dec) x 2 (14)
Rnd 8. (5 sc, dec) x 2 (12)
Rnd 9. 12 sc (12)
Rnd 10. BLO 12 sc (12)
Rnd 11. (1 sc, inc) х 6 (18) Pic. 21
10
23 24
22
To crochet a cuff, return to rnd 9, attach a light green thread. Pay attention to the
location of the arm when crocheting the cuff. Pic. 22
Crochet the cuff with HDC into FLO of rnd 9:
Ch 2, inc, (1 HDC, inc) х 5
Join the beginnig and the end of the rnd with sl st. Cut the thread, bring the end to
the wrong side of the arm, fasten off. Add some stuffing into the beige part. Pic. 23
Continue to crochet the arm.
11
For embroidery I use orange thread YarnArt Jeans. Divide the thread into 4 thin
strands and use 2 of 4. I randomly embroidered 5 “carrots” on the front of the arm.
Then make above each “carrot” 2 stitches with green thread YarnArt Jeans. Divide the
thread into 4 thin strands and use 1 of them. Pic. 25-27
25 26 27
28
Insert the wire into the arm. Add some stuffing in
the first half of the arm. Don’t stuff the second part.
Pic. 28
If you don’t use a wire for the arm so stuff the arm
in the same way but without a wire.
Tail
(in beige color, don’t stuff)
Rnd 1. 6 sc in mr (6) 29
Rnd 2. (inc) х 6 (12)
Rnd 3. (3 sc, inc) х 3 (15)
Rnd 4. 15 sc, sl st (15)
Cut the thread leaving a long tail for sewing. Pic. 29
12
The legs and a body are crocheted as one piece. Please note! Before
you start crocheting the body, you need to crochet the arms.
Legs
(make 2)
30 31
Rnd 1. Ch7, from the second ch from the crochet hook: inc, 4 sc, 4 sc into one st, then
on the other side of the chain: 4 sc, inc (16)
Rnd 2. (inc) х 2, 4 sc, (inc) х 4, 4 sc, (inc) х 2 (24)
Rnd 3. (3 sc, inc) x 6 (30) Pic. 30
Rnd 4. BLO 30 sc (30)
Rnd 5-6. 30 sc (30) 2 rounds
Rnd 7. 9 sc, (dec) х 6, 9 sc (24)
Rnd 8. 6 sc, (dec) х 6, 6 sc (18)
Rnd 9. 18 sc (18)
Change to cream color. Fasten off the beige thread. Next crochet in cream color.
Rnd 10. 18 sc (18)
Rnd 11. BLO 18 sc (18)
Rnd 12. (5 sc, inc) х 3 (21)
Rnd 13. 21 sc (21) Pic. 31
13
32 33 34
To crochet a cuff, return to rnd 10, attach a light green thread. Pay attention to the
location of the leg when crocheting the cuff. Pic. 32
Crochet the cuff with HDC into FLO of rnd 10: ch2, 1 HDC, inc, (2 HDC, inc) х 5
Join the beginnig and the end of the rnd with sl st. Cut the thread, bring the end to
the wrong side of the leg, fasten off. Stuff only the foot. Pic. 33
14
36 37 38
Rnd 20. Return to the second leg, crochet 15 sc, ch4, join
the firts leg with sl st into the 6 sc from sl st on the first
leg. Crochet 21 sc around the first leg, 4 sc along the
39 chain, 6 sc around the second leg (50)
40
Pay attention, that the increases in rnd 22 should be
located in the middle of the body.
15
41 42
Please note! In the front of the body will be a vertical bar (about 3 mm wide), do not
embroider in the center. Pic. 41
In the back of the body between rnds 26 and 32 will be located a tail. So don’t make
embroidery on this place. Pic. 42
16
45 46
47
Rnd 45. 4 sc, 6 sc along the inner side of the first arm and the body, 11 sc, 6 sc along
the inner side of the second arm and the body, 9 sc (36) Pic. 45-46
Rnd 46. 4 sc, 6 sc along the outer side of the first arm, 11 sc, 6 sc along the outer side
of the second arm, 9 sc (36) Pic. 47
Cut the thread leaving a long tail. Stuff the body. Pic. 48
49 50
Now work with the wireframe. Twist the wire ends around each other. Wrap the wire
with a masking tape or with adhesive tape. Pic. 49-50
17
For a vertical bar, make a ch25 with light green yarn.
Try on the bar, you may need more/fewer loops. Cut
51 the thread, leaving a long tail. Pic. 51
52 54
53
Sew a vertical bar using a thread tail. Divide it into 4 thin strands and use 1 of 4.
Weave in other 3 strands inside of the body. Pic 52-54
55 56 57
To crochet a collar attach a light green thread to the last rnd on the back side of the
body. Pay attention to the location of the body when crocheting the collar. Pic. 55
The crocheting direction is indicated by the arrow in the pic. 55
Crochet the collar with HDC into FLO: ch2, 5 HDC, inc, (6 HDC, inc) х 2
Join the beginnig and the end of the rnd with sl st. Cut the thread, bring the end to
the wrong side of the body, fasten off. Pic. 56-57
18
Sew the tail between rnds 26 and 32 (count the rnds
from the bottom). Pic. 58
58
Toy assembly
60
59
Sew the head to the body into back loops of the last rnd of the body and both loops
of the head. Pic. 59-60
Congratulations!
19
I would love to see your version of
Bunny, please tag me on
your Instagram posts using
@lamamama_toys
20