Professional Documents
Culture Documents
NC 11
NC 11
Task details
Facing of tube
Machined diameter start (DMS) 32 mm
Machined diameter end (DME) 6 mm
General width parameter (WIDTH) 0.3 mm
Ra roughness value on the face (RRA) 6.3 µm
Operation type (CTPT) pre-machining and
finishing
Workpiece surface condition code (WKPSCC) Pre-machined
Cutting condition code (CUTCC) Continuous cut
Recommended solution
STFCR 2020K 11-A TCGX 11 02 02-AL H10
Cutting data
Legend
Finishing
Produktinformation
Beskrivning
Beställningskod
EDP
Streckkod 10209452
LU Usable length 25 mm
HAND Hand R
B shank width 20 mm
H shank height 20 mm
HF functional height 20 mm
TQ torque 0.9 Nm
Beskrivning
Beställningskod
EDP
Streckkod 10545065
HAND Hand N
SUBSTRATE Substrate HF
Legal Notice
The data provided may be used at your own risk. AB Sandvik Coromant does not guarantee the applicability and functionality of the program, particularly the accuracy of the calculations. AB Sandvik Coromant will not accept any liability for trouble-free and
faultless use of the program. The user bears the entire risk of use.
In no event are Sandvik Coromant and its staff liable to the user for any damages, disadvantages and expenses, including any pecuniary damages, loss of data, etc., arising for the user or a third party out of, or in connection with, the use of, or inability to use,
the program. This exclusion of liability does not apply when and in as such as damages, disadvantages and expenses are caused intentionally or by gross negligence on the part of the staff of AB Sandvik Coromant.