Professional Documents
Culture Documents
Calculo de La Riel
Calculo de La Riel
Design Results
Continuous Beam
Design code AISC 360-2005 LRFD
_______________________________________________________________________________________________________________________
GENERAL INFORMATION:
Spans:
Nodes:
Distance Restraint Tx Ty Rz
[m]
---------------------------------------------------------------------------------
0.00 Fixed 1 1 1
2.42 Fixed 1 1 1
4.72 Fixed 1 1 1
8.25 Free 0 0 0
---------------------------------------------------------------------------------
Load conditions:
Reactions:
Critical deflections
Node TY RZ
[cm] [Rad]
-----------------------------------------------------------------------
Combination: S1=DL+LL
4 -2.46185 -0.00987
-----------------------------------------------------------------------
Envelopes :
V2 shear forces:
Forces [Ton], Length [m]
Vertical Translation
Deflection [cm], Length [m]
DESIGN:
_________________________________________________
Section information
_______________________________________________________________________________________________________________________
Section name: Riel 153x83x50 (US)
Dimensions
---------------------------------------------------------------------------------------------------------
Properties
---------------------------------------------------------------------------------------------------------
Section properties Unit Major axis Minor axis
Gross area of the section. (Ag) [cm2] 38.902
Moment of Inertia (local axes) (I) [cm4] 1580.870 111.350
Moment of Inertia (principal axes) (I') [cm4] 1580.870 111.350
Bending constant for moments (principal axis) (J') [cm] -8.722 1.247
Radius of gyration (local axes) (r) [cm] 6.375 1.692
Radius of gyration (principal axes) (r') [cm] 6.375 1.692
Saint-Venant torsion constant. (J) [cm4] 20.277
Section warping constant. (Cw) [cm6] 13796.202
Distance from centroid to shear center (principal axis) (xo,yo) [cm] -1.247 7.358
Top elastic section modulus of the section (local axis) (Ssup) [cm3] 212.201 26.831
Bottom elastic section modulus of the section (local axis) (Sinf) [cm3] 162.138 26.831
Top elastic section modulus of the section (principal axis) (S'sup) [cm3] 212.201 26.831
Bottom elastic section modulus of the section (principal axis) (S'inf) [cm3] 162.138 26.831
Plastic section modulus (local axis) (Z) [cm3] 220.006 44.598
Plastic section modulus (principal axis) (Z') [cm3] 220.006 44.598
Polar radius of gyration. (ro) [cm] 9.959
Area for shear (Aw) [cm2] 25.270 13.632
Torsional constant. (C) [cm3] 10.672
Material : A36
DESIGN CRITERIA
Additional assumptions
Continuous lateral torsional restraint No
Tension field action No
Continuous flexural torsional restraint No
Effective length factor value type None
Major axis frame type Sway
Minor axis frame type Sway
DESIGN CHECKS
Axial tension
Ratio : 0.00
Capacity : 88.62 [Ton] Reference : Eq. Sec. D2
Demand : 0.00 [Ton] Ctrl Eq. : D1 at 0.00%
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Intermediate results Unit Value Reference
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Factored axial tension capacity(Pn) [Ton] 88.62 Eq. Sec. D2
Required second-order compressive strength (Pr) [Ton] 0.00
Nominal axial tension capacity (Pn) [Ton] 98.46 Eq. D2-1
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Ratio : 0.00
Capacity : 82.12 [Ton] Reference : Sec. E1
Demand : 0.00 [Ton] Ctrl Eq. : D1 at 0.00%
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Intermediate results Unit Value Reference
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Section classification
Unstiffened element classification -- Non slender
Unstiffened element slenderness () -- 4.37
Unstiffened element limiting slenderness (r) -- 15.89
Stiffened element classification -- Non slender
Stiffened element slenderness () -- 15.11
Stiffened element limiting slenderness (r) -- 39.74
Factored flexural buckling strength(Pn33) [Ton] 82.12 Sec. E1
Required second-order compression strength (Pr) [Ton] 0.00
Effective length factor (K33) -- 1.00
Unbraced length (L33) [m] 2.42
Effective slenderness ((KL/r)33) -- 38.04 Eq. E3-4
Elastic critical buckling stress (Fe33) [Ton/cm2] 13.91 Eq. E3-4
Reduction factor for slender unstiffened elements (Qs33) -- 1.00
Effective area of the cross section based on the effective width (A... [cm2] 38.90 Eq. E3-2
Reduction factor for slender stiffened elements (Qa33) -- 1.00
Full reduction factor for slender elements (Q33) -- 1.00 Sec. E7
Critical stress for flexural buckling (Fcr33) [Ton/cm2] 2.35 Eq. E3-2
Nominal flexural buckling strength (Pn33) [Ton] 91.24 Eq. E3-1
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Ratio : 0.00
Capacity : 29.99 [Ton] Reference : Sec. E4
Demand : 0.00 [Ton] Ctrl Eq. : D1 at 0.00%
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Intermediate results Unit Value Reference
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Section classification
Unstiffened element classification -- Non slender
Unstiffened element slenderness () -- 4.37
Unstiffened element limiting slenderness (r) -- 15.89
Stiffened element classification -- Non slender
Stiffened element slenderness () -- 15.11
Stiffened element limiting slenderness (r) -- 39.74
Factored flexural buckling strength(Pn22) [Ton] 30.07 Sec. E1
Required second-order compression strength (Pr) [Ton] 0.00
Effective length factor (K22) -- 1.00
Unbraced length (L22) [m] 2.42
Effective slenderness ((KL/r)22) -- 143.34 Eq. E3-4
Elastic critical buckling stress (Fe22) [Ton/cm2] 0.98 Eq. E3-4
Reduction factor for slender unstiffened elements (Qs22) -- 1.00
Effective area of the cross section based on the effective width (A... [cm2] 38.90 Eq. E3-3
Reduction factor for slender stiffened elements (Qa22) -- 1.00
Full reduction factor for slender elements (Q22) -- 1.00 Sec. E7
Critical stress for flexural buckling (Fcr22) [Ton/cm2] 0.86 Eq. E3-3
Nominal flexural buckling strength (Pn22) [Ton] 33.42 Eq. E3-1
Factored torsional or flexural-torsional buckling strength(Pn11) [Ton] 29.99 Sec. E4
Effective length factor (K11) -- 1.00
Unbraced length (L11) [m] 2.42
Flexural constant (H) -- 0.44 Eq. E4-8
Torsional or flexural-torsional elastic buckling stress (Fe11) [Ton/cm2] 0.98 Eq. E4-6
Elastic torsional buckling stress (Fez) [Ton/cm2] 5.48 Eq. E4-11
Reduction factor for slender unstiffened elements (Qs11) -- 1.00
Effective area of the cross section based on the effective width (A... [cm2] 38.90 Eq. E3-3
Reduction factor for slender stiffened elements (Qa11) -- 1.00
Full reduction factor for slender elements (Q11) -- 1.00 Sec. E7
Critical stress for torsional or flexural-torsional buckling (Fcr11) [Ton/cm2] 0.86 Eq. E3-3
Nominal torsional or flexural-torsional buckling strength (Pn11) [Ton] 33.32 Eq. E4-1
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
FLEXURAL DESIGN
Ratio : 0.01
Capacity : 3.69 [Ton*m] Reference : Sec. F1
Demand : -0.02 [Ton*m] Ctrl Eq. : D2 at 0.00%
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Intermediate results Unit Value Reference
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Section classification
Unstiffened element classification -- Compact
Unstiffened element slenderness () -- 4.37
Limiting slenderness for noncompact unstiffened element (r) -- 28.38
Limiting slenderness for compact unstiffened element (p) -- 10.79
Stiffened element classification -- Compact
Stiffened element slenderness () -- 15.11
Limiting slenderness for noncompact stiffened element (r) -- 161.78
Limiting slenderness for compact stiffened element (p) -- 68.69
Factored yielding strength(Mn) [Ton*m] 3.69 Sec. F1
Yielding (Mn) [Ton*m] 4.10 Eq. F12-2
Required second-order flexural strength (Mr) [Ton*m] -0.02
Factored lateral-torsional buckling strength(Mn) [Ton*m] 5.62 Sec. F1
Lateral-torsional buckling modification factor (Cb) -- 2.38 Eq. F1-1
Lateral-torsional buckling (Mn) [Ton*m] 6.24
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Ratio : 0.00
Capacity : 0.61 [Ton*m] Reference : Sec. F1
Demand : 0.00 [Ton*m] Ctrl Eq. : D1 at 0.00%
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Intermediate results Unit Value Reference
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Section classification
Unstiffened element classification -- Compact
Unstiffened element slenderness () -- 4.37
Limiting slenderness for noncompact unstiffened element (r) -- 28.38
Limiting slenderness for compact unstiffened element (p) -- 10.79
Stiffened element classification -- Compact
Stiffened element slenderness () -- 15.11
Limiting slenderness for noncompact stiffened element (r) -- 161.78
Limiting slenderness for compact stiffened element (p) -- 68.69
Factored yielding strength(Mn) [Ton*m] 0.61 Sec. F1
Yielding (Mn) [Ton*m] 0.68 Eq. F12-2
Required second-order flexural strength (Mr) [Ton*m] 0.00
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Intermediate results Unit Value Reference
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Factored shear capacity(Vn) [Ton] 34.54
Web slenderness (w) -- 1.74
Shear area (Aw) [cm2] 25.27
Web buckling coefficient (kv) -- 1.20 Sec. G7
Web buckling coefficient (Cv) -- 1.00 Eq. G2-3
Nominal shear strength (Vn) [Ton] 38.38 Eq. G2-1
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Ratio : 0.00
Capacity : 18.63 [Ton]
Demand : 0.05 [Ton] Ctrl Eq. : D2 at 0.00%
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Intermediate results Unit Value Reference
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Factored shear capacity(Vn) [Ton] 18.63
Web slenderness (w) -- 15.11
Shear area (Aw) [cm2] 13.63
Web buckling coefficient (kv) -- 1.20 Sec. G7
Web buckling coefficient (Cv) -- 1.00 Eq. G2-3
Nominal shear strength (Vn) [Ton] 20.70 Eq. G2-1
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Intermediate results Unit Value Reference
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Interaction of flexure and axial force -- 0.01 Eq. H2-1
Required flexural strength about strong axis (Mr33) [Ton*m] -0.02
Available flexural strength about strong axis (Mc33) [Ton*m] 3.69 Sec. F1
Required flexural strength about weak axis (Mr22) [Ton*m] 0.00
Available flexural strength about weak axis (Mc22) [Ton*m] 0.61 Sec. F1
Required axial compressive stress (fa) [Ton/cm2] 0.00
Available axial compressive stress (Fa) [Ton/cm2] 0.77
Required flexural stress about major principal axis (fb33) [Ton/cm2] 0.01
Available flexural stress about major principal axis (Fb33) [Ton/cm2] 1.74
Available flexural stressabout minor principal axis (fb22) [Ton/cm2] 0.00
Required flexural stress about minor principal axis (Fb22) [Ton/cm2] 2.28
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Intermediate results Unit Value Reference
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Required flexural strength about strong axis (Mr33) [Ton*m] -0.02
Available flexural strength about strong axis (Mc33) [Ton*m] 3.69 Sec. F1
Required flexural strength about weak axis (Mr22) [Ton*m] 0.00
Available flexural strength about weak axis (Mc22) [Ton*m] 0.61 Sec. F1
Required axial tensile stress (fa) [Ton/cm2] 0.00
Available axial tensile stress (Fa) [Ton/cm2] 2.28
Required flexural stress about major principal axis (fb33) [Ton/cm2] 0.01
Available flexural stress about major principal axis (Fb33) [Ton/cm2] 1.74
Available flexural stressabout minor principal axis (fb22) [Ton/cm2] 0.00
Required flexural stress about minor principal axis (Fb22) [Ton/cm2] 2.28
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
_________________________________________________
Section information
_______________________________________________________________________________________________________________________
Section name: Riel 153x83x50 (US)
Dimensions
---------------------------------------------------------------------------------------------------------
Properties
---------------------------------------------------------------------------------------------------------
Section properties Unit Major axis Minor axis
Gross area of the section. (Ag) [cm2] 38.902
Moment of Inertia (local axes) (I) [cm4] 1580.870 111.350
Moment of Inertia (principal axes) (I') [cm4] 1580.870 111.350
Bending constant for moments (principal axis) (J') [cm] -8.722 1.247
Radius of gyration (local axes) (r) [cm] 6.375 1.692
Radius of gyration (principal axes) (r') [cm] 6.375 1.692
Saint-Venant torsion constant. (J) [cm4] 20.277
Section warping constant. (Cw) [cm6] 13796.202
Distance from centroid to shear center (principal axis) (xo,yo) [cm] -1.247 7.358
Top elastic section modulus of the section (local axis) (Ssup) [cm3] 212.201 26.831
Bottom elastic section modulus of the section (local axis) (Sinf) [cm3] 162.138 26.831
Top elastic section modulus of the section (principal axis) (S'sup) [cm3] 212.201 26.831
Bottom elastic section modulus of the section (principal axis) (S'inf) [cm3] 162.138 26.831
Plastic section modulus (local axis) (Z) [cm3] 220.006 44.598
Plastic section modulus (principal axis) (Z') [cm3] 220.006 44.598
Polar radius of gyration. (ro) [cm] 9.959
Area for shear (Aw) [cm2] 25.270 13.632
Torsional constant. (C) [cm3] 10.672
Material : A36
DESIGN CRITERIA
Additional assumptions
Continuous lateral torsional restraint No
Tension field action No
Continuous flexural torsional restraint No
Effective length factor value type None
Major axis frame type Sway
Minor axis frame type Sway
DESIGN CHECKS
Axial tension
Ratio : 0.00
Capacity : 88.62 [Ton] Reference : Eq. Sec. D2
Demand : 0.00 [Ton] Ctrl Eq. : D1 at 0.00%
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Intermediate results Unit Value Reference
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Factored axial tension capacity(Pn) [Ton] 88.62 Eq. Sec. D2
Required second-order compressive strength (Pr) [Ton] 0.00
Nominal axial tension capacity (Pn) [Ton] 98.46 Eq. D2-1
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Ratio : 0.00
Capacity : 82.75 [Ton] Reference : Sec. E1
Demand : 0.00 [Ton] Ctrl Eq. : D1 at 0.00%
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Intermediate results Unit Value Reference
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Section classification
Unstiffened element classification -- Non slender
Unstiffened element slenderness () -- 4.37
Unstiffened element limiting slenderness (r) -- 15.89
Stiffened element classification -- Non slender
Stiffened element slenderness () -- 15.11
Stiffened element limiting slenderness (r) -- 39.74
Factored flexural buckling strength(Pn33) [Ton] 82.75 Sec. E1
Required second-order compression strength (Pr) [Ton] 0.00
Effective length factor (K33) -- 1.00
Unbraced length (L33) [m] 2.30
Effective slenderness ((KL/r)33) -- 36.08 Eq. E3-4
Elastic critical buckling stress (Fe33) [Ton/cm2] 15.46 Eq. E3-4
Reduction factor for slender unstiffened elements (Qs33) -- 1.00
Effective area of the cross section based on the effective width (A... [cm2] 38.90 Eq. E3-2
Reduction factor for slender stiffened elements (Qa33) -- 1.00
Full reduction factor for slender elements (Q33) -- 1.00 Sec. E7
Critical stress for flexural buckling (Fcr33) [Ton/cm2] 2.36 Eq. E3-2
Nominal flexural buckling strength (Pn33) [Ton] 91.94 Eq. E3-1
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Ratio : 0.00
Capacity : 33.33 [Ton] Reference : Sec. E4
Demand : 0.00 [Ton] Ctrl Eq. : D1 at 0.00%
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Intermediate results Unit Value Reference
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Section classification
Unstiffened element classification -- Non slender
Unstiffened element slenderness () -- 4.37
Unstiffened element limiting slenderness (r) -- 15.89
Stiffened element classification -- Non slender
Stiffened element slenderness () -- 15.11
Stiffened element limiting slenderness (r) -- 39.74
Factored flexural buckling strength(Pn22) [Ton] 33.43 Sec. E1
Required second-order compression strength (Pr) [Ton] 0.00
Effective length factor (K22) -- 1.00
Unbraced length (L22) [m] 2.30
Effective slenderness ((KL/r)22) -- 135.95 Eq. E3-4
Elastic critical buckling stress (Fe22) [Ton/cm2] 1.09 Eq. E3-4
Reduction factor for slender unstiffened elements (Qs22) -- 1.00
Effective area of the cross section based on the effective width (A... [cm2] 38.90 Eq. E3-3
Reduction factor for slender stiffened elements (Qa22) -- 1.00
Full reduction factor for slender elements (Q22) -- 1.00 Sec. E7
Critical stress for flexural buckling (Fcr22) [Ton/cm2] 0.95 Eq. E3-3
Nominal flexural buckling strength (Pn22) [Ton] 37.15 Eq. E3-1
Factored torsional or flexural-torsional buckling strength(Pn11) [Ton] 33.33 Sec. E4
Effective length factor (K11) -- 1.00
Unbraced length (L11) [m] 2.30
Flexural constant (H) -- 0.44 Eq. E4-8
Torsional or flexural-torsional elastic buckling stress (Fe11) [Ton/cm2] 1.09 Eq. E4-6
Elastic torsional buckling stress (Fez) [Ton/cm2] 5.61 Eq. E4-11
Reduction factor for slender unstiffened elements (Qs11) -- 1.00
Effective area of the cross section based on the effective width (A... [cm2] 38.90 Eq. E3-3
Reduction factor for slender stiffened elements (Qa11) -- 1.00
Full reduction factor for slender elements (Q11) -- 1.00 Sec. E7
Critical stress for torsional or flexural-torsional buckling (Fcr11) [Ton/cm2] 0.95 Eq. E3-3
Nominal torsional or flexural-torsional buckling strength (Pn11) [Ton] 37.03 Eq. E4-1
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
FLEXURAL DESIGN
Ratio : 0.01
Capacity : 3.69 [Ton*m] Reference : Sec. F1
Demand : -0.02 [Ton*m] Ctrl Eq. : D2 at 100.00%
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Intermediate results Unit Value Reference
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Section classification
Unstiffened element classification -- Compact
Unstiffened element slenderness () -- 4.37
Limiting slenderness for noncompact unstiffened element (r) -- 28.38
Limiting slenderness for compact unstiffened element (p) -- 10.79
Stiffened element classification -- Compact
Stiffened element slenderness () -- 15.11
Limiting slenderness for noncompact stiffened element (r) -- 161.78
Limiting slenderness for compact stiffened element (p) -- 68.69
Factored yielding strength(Mn) [Ton*m] 3.69 Sec. F1
Yielding (Mn) [Ton*m] 4.10 Eq. F12-2
Required second-order flexural strength (Mr) [Ton*m] -0.02
Factored lateral-torsional buckling strength(Mn) [Ton*m] 5.91 Sec. F1
Lateral-torsional buckling modification factor (Cb) -- 2.38 Eq. F1-1
Lateral-torsional buckling (Mn) [Ton*m] 6.57
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Ratio : 0.00
Capacity : 0.61 [Ton*m] Reference : Sec. F1
Demand : 0.00 [Ton*m] Ctrl Eq. : D1 at 0.00%
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Intermediate results Unit Value Reference
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Section classification
Unstiffened element classification -- Compact
Unstiffened element slenderness () -- 4.37
Limiting slenderness for noncompact unstiffened element (r) -- 28.38
Limiting slenderness for compact unstiffened element (p) -- 10.79
Stiffened element classification -- Compact
Stiffened element slenderness () -- 15.11
Limiting slenderness for noncompact stiffened element (r) -- 161.78
Limiting slenderness for compact stiffened element (p) -- 68.69
Factored yielding strength(Mn) [Ton*m] 0.61 Sec. F1
Yielding (Mn) [Ton*m] 0.68 Eq. F12-2
Required second-order flexural strength (Mr) [Ton*m] 0.00
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Ratio : 0.00
Capacity : 34.54 [Ton]
Demand : 0.00 [Ton] Ctrl Eq. : D1 at 0.00%
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Intermediate results Unit Value Reference
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Factored shear capacity(Vn) [Ton] 34.54
Web slenderness (w) -- 1.74
Shear area (Aw) [cm2] 25.27
Web buckling coefficient (kv) -- 1.20 Sec. G7
Web buckling coefficient (Cv) -- 1.00 Eq. G2-3
Nominal shear strength (Vn) [Ton] 38.38 Eq. G2-1
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Ratio : 0.00
Capacity : 18.63 [Ton]
Demand : -0.05 [Ton] Ctrl Eq. : D2 at 100.00%
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Intermediate results Unit Value Reference
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Factored shear capacity(Vn) [Ton] 18.63
Web slenderness (w) -- 15.11
Shear area (Aw) [cm2] 13.63
Web buckling coefficient (kv) -- 1.20 Sec. G7
Web buckling coefficient (Cv) -- 1.00 Eq. G2-3
Nominal shear strength (Vn) [Ton] 20.70 Eq. G2-1
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Intermediate results Unit Value Reference
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Interaction of flexure and axial force -- 0.01 Eq. H2-1
Required flexural strength about strong axis (Mr33) [Ton*m] -0.02
Available flexural strength about strong axis (Mc33) [Ton*m] 3.69 Sec. F1
Required flexural strength about weak axis (Mr22) [Ton*m] 0.00
Available flexural strength about weak axis (Mc22) [Ton*m] 0.61 Sec. F1
Required axial compressive stress (fa) [Ton/cm2] 0.00
Available axial compressive stress (Fa) [Ton/cm2] 0.86
Required flexural stress about major principal axis (fb33) [Ton/cm2] 0.01
Available flexural stress about major principal axis (Fb33) [Ton/cm2] 1.74
Available flexural stressabout minor principal axis (fb22) [Ton/cm2] 0.00
Required flexural stress about minor principal axis (Fb22) [Ton/cm2] 2.28
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Intermediate results Unit Value Reference
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Required flexural strength about strong axis (Mr33) [Ton*m] -0.02
Available flexural strength about strong axis (Mc33) [Ton*m] 3.69 Sec. F1
Required flexural strength about weak axis (Mr22) [Ton*m] 0.00
Available flexural strength about weak axis (Mc22) [Ton*m] 0.61 Sec. F1
Required axial tensile stress (fa) [Ton/cm2] 0.00
Available axial tensile stress (Fa) [Ton/cm2] 2.28
Required flexural stress about major principal axis (fb33) [Ton/cm2] 0.01
Available flexural stress about major principal axis (Fb33) [Ton/cm2] 1.74
Available flexural stressabout minor principal axis (fb22) [Ton/cm2] 0.00
Required flexural stress about minor principal axis (Fb22) [Ton/cm2] 2.28
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Section information
_______________________________________________________________________________________________________________________
Section name: Riel 153x83x50 (US)
Dimensions
---------------------------------------------------------------------------------------------------------
Properties
---------------------------------------------------------------------------------------------------------
Section properties Unit Major axis Minor axis
Gross area of the section. (Ag) [cm2] 38.902
Moment of Inertia (local axes) (I) [cm4] 1580.870 111.350
Moment of Inertia (principal axes) (I') [cm4] 1580.870 111.350
Bending constant for moments (principal axis) (J') [cm] -8.722 1.247
Radius of gyration (local axes) (r) [cm] 6.375 1.692
Radius of gyration (principal axes) (r') [cm] 6.375 1.692
Saint-Venant torsion constant. (J) [cm4] 20.277
Section warping constant. (Cw) [cm6] 13796.202
Distance from centroid to shear center (principal axis) (xo,yo) [cm] -1.247 7.358
Top elastic section modulus of the section (local axis) (Ssup) [cm3] 212.201 26.831
Bottom elastic section modulus of the section (local axis) (Sinf) [cm3] 162.138 26.831
Top elastic section modulus of the section (principal axis) (S'sup) [cm3] 212.201 26.831
Bottom elastic section modulus of the section (principal axis) (S'inf) [cm3] 162.138 26.831
Plastic section modulus (local axis) (Z) [cm3] 220.006 44.598
Plastic section modulus (principal axis) (Z') [cm3] 220.006 44.598
Polar radius of gyration. (ro) [cm] 9.959
Area for shear (Aw) [cm2] 25.270 13.632
Torsional constant. (C) [cm3] 10.672
Material : A36
DESIGN CRITERIA
Additional assumptions
Continuous lateral torsional restraint No
Tension field action No
Continuous flexural torsional restraint No
Effective length factor value type None
Major axis frame type Sway
Minor axis frame type Sway
DESIGN CHECKS
Axial tension
Ratio : 0.00
Capacity : 88.62 [Ton] Reference : Eq. Sec. D2
Demand : 0.00 [Ton] Ctrl Eq. : D1 at 0.00%
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Intermediate results Unit Value Reference
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Factored axial tension capacity(Pn) [Ton] 88.62 Eq. Sec. D2
Required second-order compressive strength (Pr) [Ton] 0.00
Nominal axial tension capacity (Pn) [Ton] 98.46 Eq. D2-1
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Ratio : 0.00
Capacity : 75.44 [Ton] Reference : Sec. E1
Demand : 0.00 [Ton] Ctrl Eq. : D1 at 0.00%
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Intermediate results Unit Value Reference
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Section classification
Unstiffened element classification -- Non slender
Unstiffened element slenderness () -- 4.37
Unstiffened element limiting slenderness (r) -- 15.89
Stiffened element classification -- Non slender
Stiffened element slenderness () -- 15.11
Stiffened element limiting slenderness (r) -- 39.74
Factored flexural buckling strength(Pn33) [Ton] 75.44 Sec. E1
Required second-order compression strength (Pr) [Ton] 0.00
Effective length factor (K33) -- 1.00
Unbraced length (L33) [m] 3.53
Effective slenderness ((KL/r)33) -- 55.30 Eq. E3-4
Elastic critical buckling stress (Fe33) [Ton/cm2] 6.58 Eq. E3-4
Reduction factor for slender unstiffened elements (Qs33) -- 1.00
Effective area of the cross section based on the effective width (A... [cm2] 38.90 Eq. E3-2
Reduction factor for slender stiffened elements (Qa33) -- 1.00
Full reduction factor for slender elements (Q33) -- 1.00 Sec. E7
Critical stress for flexural buckling (Fcr33) [Ton/cm2] 2.15 Eq. E3-2
Nominal flexural buckling strength (Pn33) [Ton] 83.82 Eq. E3-1
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Ratio : 0.00
Capacity : 14.21 [Ton] Reference : Sec. E4
Demand : 0.00 [Ton] Ctrl Eq. : D1 at 0.00%
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Intermediate results Unit Value Reference
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Section classification
Unstiffened element classification -- Non slender
Unstiffened element slenderness () -- 4.37
Unstiffened element limiting slenderness (r) -- 15.89
Stiffened element classification -- Non slender
Stiffened element slenderness () -- 15.11
Stiffened element limiting slenderness (r) -- 39.74
Factored flexural buckling strength(Pn22) [Ton] 14.23 Sec. E1
Required second-order compression strength (Pr) [Ton] 0.00
Effective length factor (K22) -- 1.00
Unbraced length (L22) [m] 3.53
Effective slenderness ((KL/r)22) -- 208.35 Eq. E3-4
Elastic critical buckling stress (Fe22) [Ton/cm2] 0.46 Eq. E3-4
Reduction factor for slender unstiffened elements (Qs22) -- 1.00
Effective area of the cross section based on the effective width (A... [cm2] 38.90 Eq. E3-3
Reduction factor for slender stiffened elements (Qa22) -- 1.00
Full reduction factor for slender elements (Q22) -- 1.00 Sec. E7
Critical stress for flexural buckling (Fcr22) [Ton/cm2] 0.41 Eq. E3-3
Nominal flexural buckling strength (Pn22) [Ton] 15.81 Eq. E3-1
Factored torsional or flexural-torsional buckling strength(Pn11) [Ton] 14.21 Sec. E4
Effective length factor (K11) -- 1.00
Unbraced length (L11) [m] 3.53
Flexural constant (H) -- 0.44 Eq. E4-8
Torsional or flexural-torsional elastic buckling stress (Fe11) [Ton/cm2] 0.46 Eq. E4-6
Elastic torsional buckling stress (Fez) [Ton/cm2] 4.83 Eq. E4-11
Reduction factor for slender unstiffened elements (Qs11) -- 1.00
Effective area of the cross section based on the effective width (A... [cm2] 38.90 Eq. E3-3
Reduction factor for slender stiffened elements (Qa11) -- 1.00
Full reduction factor for slender elements (Q11) -- 1.00 Sec. E7
Critical stress for torsional or flexural-torsional buckling (Fcr11) [Ton/cm2] 0.41 Eq. E3-3
Nominal torsional or flexural-torsional buckling strength (Pn11) [Ton] 15.79 Eq. E4-1
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
FLEXURAL DESIGN
Ratio : 0.92
Capacity : 3.69 [Ton*m] Reference : Sec. F1
Demand : -3.39 [Ton*m] Ctrl Eq. : D3 at 0.00%
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Intermediate results Unit Value Reference
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Section classification
Unstiffened element classification -- Compact
Unstiffened element slenderness () -- 4.37
Limiting slenderness for noncompact unstiffened element (r) -- 28.38
Limiting slenderness for compact unstiffened element (p) -- 10.79
Stiffened element classification -- Compact
Stiffened element slenderness () -- 15.11
Limiting slenderness for noncompact stiffened element (r) -- 161.78
Limiting slenderness for compact stiffened element (p) -- 68.69
Factored yielding strength(Mn) [Ton*m] 3.69 Sec. F1
Yielding (Mn) [Ton*m] 4.10 Eq. F12-2
Required second-order flexural strength (Mr) [Ton*m] -3.39
Factored lateral-torsional buckling strength(Mn) [Ton*m] 3.99 Sec. F1
Lateral-torsional buckling modification factor (Cb) -- 1.94 Eq. F1-1
Lateral-torsional buckling (Mn) [Ton*m] 4.43
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Ratio : 0.00
Capacity : 0.61 [Ton*m] Reference : Sec. F1
Demand : 0.00 [Ton*m] Ctrl Eq. : D1 at 0.00%
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Intermediate results Unit Value Reference
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Section classification
Unstiffened element classification -- Compact
Unstiffened element slenderness () -- 4.37
Limiting slenderness for noncompact unstiffened element (r) -- 28.38
Limiting slenderness for compact unstiffened element (p) -- 10.79
Stiffened element classification -- Compact
Stiffened element slenderness () -- 15.11
Limiting slenderness for noncompact stiffened element (r) -- 161.78
Limiting slenderness for compact stiffened element (p) -- 68.69
Factored yielding strength(Mn) [Ton*m] 0.61 Sec. F1
Yielding (Mn) [Ton*m] 0.68 Eq. F12-2
Required second-order flexural strength (Mr) [Ton*m] 0.00
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Ratio : 0.00
Capacity : 34.54 [Ton]
Demand : 0.00 [Ton] Ctrl Eq. : D1 at 0.00%
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Intermediate results Unit Value Reference
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Factored shear capacity(Vn) [Ton] 34.54
Web slenderness (w) -- 1.74
Shear area (Aw) [cm2] 25.27
Web buckling coefficient (kv) -- 1.20 Sec. G7
Web buckling coefficient (Cv) -- 1.00 Eq. G2-3
Nominal shear strength (Vn) [Ton] 38.38 Eq. G2-1
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Ratio : 0.07
Capacity : 18.63 [Ton]
Demand : 1.25 [Ton] Ctrl Eq. : D3 at 0.00%
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Intermediate results Unit Value Reference
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Factored shear capacity(Vn) [Ton] 18.63
Web slenderness (w) -- 15.11
Shear area (Aw) [cm2] 13.63
Web buckling coefficient (kv) -- 1.20 Sec. G7
Web buckling coefficient (Cv) -- 1.00 Eq. G2-3
Nominal shear strength (Vn) [Ton] 20.70 Eq. G2-1
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Intermediate results Unit Value Reference
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Interaction of flexure and axial force -- 1.20 Eq. H2-1
Required flexural strength about strong axis (Mr33) [Ton*m] -3.39
Available flexural strength about strong axis (Mc33) [Ton*m] 3.69 Sec. F1
Required flexural strength about weak axis (Mr22) [Ton*m] 0.00
Available flexural strength about weak axis (Mc22) [Ton*m] 0.61 Sec. F1
Required axial compressive stress (fa) [Ton/cm2] 0.00
Available axial compressive stress (Fa) [Ton/cm2] 0.37
Required flexural stress about major principal axis (fb33) [Ton/cm2] 2.09
Available flexural stress about major principal axis (Fb33) [Ton/cm2] 1.74
Available flexural stressabout minor principal axis (fb22) [Ton/cm2] 0.00
Required flexural stress about minor principal axis (Fb22) [Ton/cm2] 2.28
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Intermediate results Unit Value Reference
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Required flexural strength about strong axis (Mr33) [Ton*m] -3.39
Available flexural strength about strong axis (Mc33) [Ton*m] 3.69 Sec. F1
Required flexural strength about weak axis (Mr22) [Ton*m] 0.00
Available flexural strength about weak axis (Mc22) [Ton*m] 0.61 Sec. F1
Required axial tensile stress (fa) [Ton/cm2] 0.00
Available axial tensile stress (Fa) [Ton/cm2] 2.28
Required flexural stress about major principal axis (fb33) [Ton/cm2] 2.09
Available flexural stress about major principal axis (Fb33) [Ton/cm2] 1.74
Available flexural stressabout minor principal axis (fb22) [Ton/cm2] 0.00
Required flexural stress about minor principal axis (Fb22) [Ton/cm2] 2.28
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------