Professional Documents
Culture Documents
com
ISO 9001/2000 Certified
Up to 2000 lb capacity
Machine Cut Spur Gears for accurate and long lasting service. Automatic Brake Models provide positive load control for lifting and lowering operations. Brake models have PB suffix. Corrosion Resistant trivalent zinc plated finish protects against corrosion in harsh environments. Quick Disconnect Anchor 1 for quickly attaching or removing wire rope equipped with a swaged ball fitting. Bronze and Radial Ball Bearings provide smooth and efficient operation. Large Diameter Drums minimize wear to extend wire rope life. Gear Covers protect gears and help prevent injuries. Stainless Steel Models Available for harsh environments, see models with SS suffix. Stainless steel models are electro-polished for added corrosion resistance. Two-year Limited Warranty
M4042PBSS 1000 lb stainless steel 1000 with brake (for lifting) M4312 2000 lb marine duty (for pulling only) 2000 lb marine duty with brake (for lifting)
3.83:1
14.7:1 20 lb (double gear) 14.7:1 17 lb (double gear) 14.7:1 17 lb (double gear) 14.7:1 20 lb (double gear) 14.7:1 17 lb (double gear)
23
M4312PB
28
M4312PBSS 2000 lb stainless steel 2000 1600 1200 with brake (for lifting) M4412 2000 lb marine duty (for pulling only) 2000 lb marine duty with brake (for lifting) 2000 1600 1200
28
3.83:1
25
M4412PB
30
Please contact factory or nearest Thern Distributor for firm fixed price and delivery. 1 For Models M4022, M4022PB, M4032, M4032PB ball end is available for 1/8 inch and 3/16 inch only. For Models M4042PBSS, M4312, M4312PB, M4312PBSS, M4412, M4412PB ball end is available for 3/16 inch and 1/4 inch only. 2 Actual drum capacities may be 25-30% less, due to nonuniform winding. Wire rope tension will also affect drum capacity. 3 Approximate handle force required to lift 1000 lb with an empty drum, and maximum handle length. See Dimensions on Next Page
Page 2 Thern products are not for lifting people or things over people. Form FF06-1106
1-800-843-7648 www.thern.com
ISO 9001/2000 Certified
Model M401 Model M4042PBSS
S J K
S J K
G H
handle rotation UP
handle rotation UP
T
drum C L
E F B
handle rotation C L
drum C L
D C A
T F B
handle rotation C L
C D A
S J
LM
Flange Clip Anchor
handle rotation UP
T B F A
Cranes Section 4
S
Model M4022PB and M4032PB
L J K
H C D A
handle rotation UP
drum C L
G
handle rotation C L
S(hole dia.) T
E B
T F
Dimensions are for reference only and subject to change without notice. 1 Models M401, M4022PB, M4032PB and M4042PBSS handles are adjustable, dimension shown is for maximum handle length.
w ir e
rope
1-800-843-7648 www.thern.com
ISO 9001/2000 Certified
Models M4312PB, M4412PB and M4312PBSS Wire Rope Installation - Models M4312, M4312PB, M4312PBSS, M4412 and M4412PB
S J K
LM
handle rotation UP
H G
handle rotation C L
w ir e
rope
drum C L
D C A
E F B
S J
M
Flange Clip Anchor
handle rotation UP
H C
drum C L
G
handle rotation C L
Cranes Section 4
D A
T F B
2.50 5.50 3.00 10.00 12.70 7.15 4.00 4.00 8.00 8.75 13.35 3.34 5.31 5.00 6.00 .40 .18
Important:
It is the owner's or operator's responsibility to determine the suitability of the equipment to its intended use. Study all applicable codes, manuals, and regulations. Be sure to read the Owner's Manual supplied with the equipment before operating it.
Page 4
K L M S (hole dia.) T
Dimensions are for reference only and subject to change without notice. 1 Models M4312PB, M4312PBSS and M4412PB handles are adjustable, dimension shown is for maximum handle length.
Form FF06-1106
Thern products are not for lifting people or things over people.