Professional Documents
Culture Documents
9 x 20 Lathe 11-2002
Intermediate and selector gears move together and are in series with the gear box gears
Intermediate Selector
Gear Gear Gear Box Gears are mounted on lead screw
Stacked Gears Stacked Gears Teeth per In. and Lever Positions are shown below
Change 127 120 Change 16 36 16 18 19 20 22 23 24
Gear A Gear Gear Gear B Gear Gear Pos. 1 Pos. 2 Pos. 3 Pos. 4 Pos. 5 Pos. 6 Pos. 7
The following are inch change gear settings showing the more popular
Inch Threads [Range 8 to 56 TPI]
60 127 30 8 9 9.5 10 11 11.5 12
30 127 30 16 18 19 20 22 23 24
30 127 60 32 36 38 40 44 46 48
20 127 40 32 36 38 40 44 46 48
The following are metric change gear settings showing the more useful
mm lead per thread settings (note that there are duplicates)
Metric Threads [ Range 0.4 to 4.0 mm]
28 127 120 60 0.7
30 127 120 60 0.75 0.6 0.5
36 127 120 60 0.9 0.8 0.6
30 127 120 45 1 0.8
36 127 120 45 1.2 0.8
30 127 120 36 1.25 1
30 127 120 30 1.5 1
42 127 120 36 1.75
60 127 120 45 2
42 127 120 28 2.25 2
45 127 120 30 2
Steve Bedair
9 x 20 Lathe 11-2002
26 28
Pos. 8 Pos. 9 g4000 9x19 grizzly Central Machinery T45861
total 94.45
Steve Bedair
9 x 20 Lathe 11-2002
0.46 0.43