Professional Documents
Culture Documents
Cutting pitch
By:
Abhinav Koranga
Anand Singh
Tanya Shree
Tarun Kumar Agrawal
CUTTING PITCH
Angle with which cutting edge contact the spread
All machine has a cutting pitch
Straight
Knife
Spread 90˚
If the edge forms a line leaning into the spread as the
line progresses from base plate to the top ,the pitch is less
than 90˚.
Spread <90˚
Rotary blade have curved pitches which are less than 90˚.
The pitch of the circular blade is equal to the curvature of
the cutting arc in the spread.
The arc of the blade perimeter from the base plate to the
top surface of the spread.
Round Knife
Spread
<90˚
If the spread is higher than the radius of the
blade, the cutting pitch is two–way or reversible
pitch.
Round Knife
<90˚
Spread
<90˚
The pitch of any cutting machine dictates the cutting
method to be used.
Hence a vital factor in choosing a cutting machine
for the given spread.
The greater the diameter of the rotary blade, the
greater the lateral difference in the pitch.
This means top ply will be cut sooner then the bottom
ply.
When a rotary cut a spread whose height is greater
than the blade radius- center plies ( )will be cut
soonest, the top plies next( ) , and the bottom
plies ( ) last.
Spread
<90˚
Here the cutter must know the lateral difference between
the lead cutting point of the blade and cutting point of the
top.
The lead cutting point of a rotary cutting machine is the