Professional Documents
Culture Documents
Hardware Introduction
Contents
ZXCTN 6220 is the packet transmission-oriented carrier-class multi-service carrier product introduced by ZTE.
It focuses on bearing and transmission of integrated mobile Backhaul and multi-service network, which can meet
transmission requirements of various access layer services or low capacity convergence layer.
ZXCTN 6220 Application Scenario
IP/MPLS Internet
SS / IMS DWDM/OTN
BSC/RNC
AAA/NMS
核心层
Core Layer
EMS/NMS
汇聚层
Convergence Layer
ZXCTN 6300 ZXCTN 6220
PTN
PON MSAN
BTS
eNB NodeB
ZXCTN 6220 Brief Introduction
Dimensions : 482.6mm(W) X 133.3mm(H) X 243.0mm(D) .
Satisfies the mounting requirements of subrack in the IEC standard cabinet
(19–inch cabinet) or ETS standard cabinet (21–inch cabinet).
Mounting mode : cabinet, with the depth of 300 mm.
Subrack adopts crosswise structure, 3U height.
Multi-service bearing : support FE 、 GE 、 XGE 、 E1/T1 、 STM-1/4
service interfaces.
Switch capacity : 44Gbps.
Backplane Capacity :320Gbps.
Packet transmit rate : 65.47Mpps.
Equipment power consumption : ≤ 300W.
Power supply : -48V DC ,(220V AC power supply should be converted from
extra added converter).
Based on all-packet architecture .
Offers redundant protection for equipment-level critical units, including 1+1
protection for power board, main control board, switching board and clock
board.
Earthquake-proof level : safe under level-9 earthquake .
Contents
FE/GE/10GE
ETH PWE3
Clock/time sync
( Ethernet clock sync, 1588 time sync )
ZXCTN 6220
Considering the heat radiation , at most three
subracks can be installed in cabinet.
The free space can be used to install user’s device ,
such as router.
1U space (1U = 44.45mm) at least be reserved in the
bottom of cabinet for installing the cabinet back door
ZXCTN 6220 and ensuring the connection of cabinet grounding
cable
Cabinet adopts unified ZTE transmission equipment
cabinet, complying with IEC standards. ; adopts
front/back column and single front opening door.
System Components
System Features
Centralized switch
ZXCTN 6220 system realize the switch function in the main control
switch clock board.
Distributed control
There is a Central Processing Unit (CPU) in each main control switch
clock board and all kinds of service board of ZXCTN 6220, so ZXCTN
6220 system is a multi-CPU distributed control system.
Active/backup switch
Install two main control switch clock board in the ZXCTN 6220,to form
an active/backup switch backup mode.
Services and Functions
Service Processing Model
ZXCTN 6220 Subrack
1. Mounting lug
2. Fan area
3. Subrack protection ground wiring stud
4. Power board area
5. Service wire card area
6. Anti-static wrist strap hole
7. Switch control clock unit area
Board Slots in Subrack
Slot1 Slot2
Slot3 Slot4 Slot9
PWR
Slot7 F
A
Slot8
N
Slot10
Slot5 Slot6 PWR
1. Board operating state indicator RUN 10. Alarm output interface ALM_OUT
2. Board alarm indicator ALM 11. Local craft terminal interface LCT
3. Board active/standby state indicator MST 12. Network management interface Qx
4. Clock operating state indicator CLK 13. Equipment operating state indicator interface LAMP
5. BITS interface Tx 14. Equipment debugging interface CON
6. BITS interface Rx 15. Board forced switchover button EXCH
7. Time interface GPS_IN 16. Board reset button RST
8. Time interface GPS_OUT 17. Bell-off button B_RST
9. Alarm input interface ALM_IN 18. Ejector lever
RSCCP2-120 and RSCCP2/2-120 Boards
Front Panel
LAMP Device running indicator interface, the interface type is RJ45. It is used to connect the alarm
indicators of cabinet and heads cabinet.
CON Device debugging interface, the interface type is RJ45. It is used to configure and maintain the system.
Board Function
IP Network
GRE Tunnel
Framing
2
3 4 9 10
1. Captive screw
2. GE Ethernet electrical interface
3. Board running indicator
4. Board alarm indicator
Interface
5. GE Ethernet electrical interface ACT indicator :
yellow Interface Description
6. GE Ethernet electrical interface LINK indicator : green GE ( electrical ) 4 gigabit Ethernet electrical interfaces,
7. GE Ethernet optical interface ACT indicator : green
8. GE Ethernet optical interface LINK indicator : green Using RJ45 socket
9. GE Ethernet optical interface GE ( optical ) 4 gigabit Ethernet optical interfaces,
10. Carrying handle Using pluggable SFP optical module
11. Laser warning mark
Enhanced Gigabit Electrical Interface Board R8EGE
Board Functions
R8EGE is an enhanced Gigabit Ethernet board, which provides eight Ethernet
electrical interfaces
2
3
4 7
1. Captive screw
2. Board running/protection status indicator (RUN/MS)
3. Board alarm indicator (ALM)
4. Optical interface sending indicator Tn n=1~4, green
5. Optical interface receiving indicator Rn n=1~4, green
6. STM-1/STM-4 optical interface: 4–port Channelized PoS STM-1,only he first port can be set as STM-4
7. Carrying handle
8. Laser warning mark
9. Laser class mark
8-Port Fast Ethernet Optical/ Electrical interface
Board R8FEF/R8FEI
Front Panel 2 3 4
3 4
1 5
1 2 5
1. Indicator
2. Optical / Electrical interface
3. ACTIVE state indicator of the optical interface
4. LINK state indicator of the optical interface
5. Laser warning mark
63-Port E1 Protection interface board R63E1PI
Front Panel
R63E1PI-75 and R63E1PI-120 have the same front panel except the board name.
1 2 4
3
R63E1 R63E1
U U
Work
Slot1 Backup
Slot2
R63E1P Slot3
Interface Slot4 PWR
1 Slot7 F
A
Slot8 N
PWR
Slot5 Slot6
Board Function
1 4