Professional Documents
Culture Documents
Installing networks of pipes inside the building in case of fire emergency. Each pipe
has multiple sprinkler endpoints.
All the pipe lines are provided with constant pressure of water
Every sprinkler is equipped with a temperature sensing glass blub, which explodes at
specific temperature.
When the glass blub is destroyed, all the water in the pipe starts to spray with high
pressure, reducing the overall pressure inside the pipes.
Pressure decreasing in the pipe networks triggers the fire alarm, and activates the
pump.
Some On-site Records
Installation
Air conditioning systems
Then install outdoor units at the nearest suitable outside of the building.
Introduction
Embedded Conduits
Correct type of conduit installed as per approved sample
Conduit boxes clean and open end plugged/ temporarily protected
Coupling joints fastened
Bonding to earth provided for all metallic conduits
Conduits properly secured
Conduits properly bent without distortion and damage
No visible damage
Conduits end properly protected
Quality Standards
Main Cables
Cables adequately supported
Fire stops properly installed
Adequate spacing of cables
Distribution Board
Circuit diagram provided and Proper labelling for panel
Suitable cable termination provided
All live parts to be non-accessible
All exposed metal parts effectively earthed
Quality Standards
Surface Conduits
Conduit ends properly connected
Metallic conduits properly earthed
Correct type of conduit as per approved sample
Conduits properly bent without distortion and damage
Support / brackets rigidly fitted
Screw used properly fastened
Fire stops properly installed
Conduits and accessories properly painted
No visible damage
Quality Standards