You are on page 1of 7

Testeo de Ventiladores de Emergencia

NI Test Automatico

Ing. Martin Garcia


Ingenierio Biomedico
National Instruments

ni.com
NI Supports General Motors
Ventilator Production
GM started producing the Ventec VOCSN ventilator out of the converted
GM Kokomo facility with goals of shipping 30,000 units by the end of
August.

“ NI has gone above and beyond in support of our ventilator project. I have
never seen NI move so fast with production and shipping, and the
calibration lab they recommended to us is processing our parts very
quickly. ”
- Tim Carroll, President/COO, Velentium

“ With NI’s help, we were able to deliver continuity and Hipot testers in 8
days to help GM start ventilator production. GM was thrilled that Bauer was
able to come through for them, and I am thankful that NI was able to help
us with this effort. ”
- Jeff Collyer, President/CEO, Bauer Controls

Photos by AJ Master, used with General Motors permission


How NI Can Help with Ventilator Testing
Functional test (FATP)
• Different therapy modes
• SIMV
• Oxygen concentration
• Tidal Volume (VTI/VTE)
• Peak pressure (PIP, PEP)
• Breaths per minute
• Patient in circuit test
Mass Production
Subassembly Test
• Chassis, mixer valves, and flow sensors
• Leak Test
• Functional test
• Calibration
NPI
Component Test
• Sensor
Design • PCBA
• Battery Test
• Electric Harness
Partes Basicas Mecanicas de un ventildador de emergencia
Sistema de Pruebas Automaticas de NI - PXI

Mediciones
• Torque
• Presiones
• Volumenes
• Voltaje
• Corriente
• Temperatura
• Fuerza – Ambubag
• RPM
Sistema de Pruebas en Funcionamiento
Muchas Gracias

ni.com

You might also like