Professional Documents
Culture Documents
Accreditation
Reviewer
What is the sample for compressive strength
determination of a structural concrete?
Ans: asphalt
What is the penetration grade of blown
asphalt?
80% maximum
What asphalt is used for sealing weaken
plane joint of concrete pavement?
Ans: Blown Asphalt
What are the other terms for sieve analysis?
Ans: Grading Test, Particle Size Distribution
Test, Mechanical Analysis
How many concrete cores shall be taken for
one (1) kilometer concrete pavement?
Ans: 5 holes/km/lane
If the group index of a soil is high, what
indication does it mean?
Ans: the soil is clayey
As a Materials Engineer, how can you determine that
the sample placed in the oven is already oven – dried?
Ans: if the sample reaches its constant
weight
In oven drying a sample for test, what
temperature shall be maintained?
Ans: 110 ± 5oC
Why is it that cooling an oven dried sample
before weighing is advisable?
Ans: because it can affect its weight
What is the difference between hygroscopic
moisture content from natural moisture content?
Ans: hygroscopic moisture content is the moisture content of an
air- dried sample while natural moisture content is the moisture
content of the original sample from the field.
An admixture is being introduced to the fresh concrete mixture for
heavily reinforced concrete structure using a pumpcrete to pump out
the fresh concrete mix, what admixture should it be?
Ans: Superplasticizer
What is the use of blown asphalt?
Ans: as joint filler and water proofing
What asphalt is commonly known as hot
asphalt or penetration grade asphalt?
Ans: Asphalt Cement
How many days does the sample for Immersion
– Compression Test be soaked in water?
Ans: 4 days @ 50 oC
If ductility test is for asphalt, _____ is for
cement? Consistency
Ans: Magnesium Oxide, Insoluble Residue,
Loss on Ignition
Paint is composed of _____
Ans: 35% vehicle, 50% pigment, 15% beads
What is the size of tamping rod used in
tamping concrete sample?
Ans: 16 mm Ø and 610 mm long with
hemispherical tip
What is the temperature to be maintained
when curing sample after its initial curing?
Ans: 23o C ± 1.7o C
Concrete cylinders are cured and ready for test. Temperature between 63°F to
85°F are permitted for a period not to exceed _____ hours immediately prior to
test if free moisture is maintained on the surface of the specimen at all times.
Ans: 60 blows/layer
What is the material used for Bituminous
Prime Coat?
Ans: Cut-back asphalt
In Item 303, application of cover aggregates shall be evenly
spread over the surface at the rate of approximately _____?