You are on page 1of 8

Black Spot Identification

24th Sep 2020

Sensitivity: Internal
Outlook | Drive Test

2G Coverage : 2G good coverage is the ratio of Good RXLEV sample to total RXLEV
sample. Measured by scanner in idle mode.

3G Coverage : 3G good coverage is measure by ECNO blended RSCP. 3G good


coverage is the ratio of sample count of both Good RSCP and Good ECNO to total
Sample count . Measured by scanner in idle mode.

4G Coverage : 4G good coverage is measure by RSRQ blended RSRP .4G good


coverage is the ratio of sample count of both Good RSRP and Good RSRQ total
Sample count . Measure from scanner in idle mode.

Call Testing : Call testing duration 110 s and wait time is 10s in active mode.

MOS Testing : During call testing every 15s one MOS sample generated in active
mode.

Sensitivity: Internal
Black Spot Identification / Generation

 Execution time for each


project/Thana : 1~1.5 min

Rx Level, RSCP, EcNo


data collect with Upload to SRMS
Black Spot output
coordinate from Web Page
Scanner dump

Logic applied for BS


Identification & Cell
identification based on Cell
Azimuth & BS distance form
site

Cell Name , Azimuth


and Site coordinate Image share for
Black Spot Image
collect as Cell not Planner
available in Scanner.

Sensitivity: Internal
Black Spot Output for SRMS upload
ISCM User Severit RPZone AROZ Lon Lat Fault ProblemCo Compo Ticket Priority Technology Service Teritory Circle Comments
ID Group/Sub y one Escalation mponent nent Type Thana
center ID Date Type District
Project Name: NABIGANJ_11092019.
Coverage SY_HG_ SY_HG_ District: HG. Nearest Site: HGKLG1WF.
RP- 9/22/2019
4306 67 Major ROS 90.571 24.496 HGKLG1WF 3G Blackspo Priority1 UMTS Coverage NABIGA NABIGA Find Pre-image here:
Sylhet 12:00 t NJ NJ G:\Common\MLPM Black
Spots\NABIGANJ_HG_3G BS_2.png

Sensitivity: Internal
DT Calling Dump for Analysis
 Execution time for each
project/Thana : 1~1.5 min

Calling dump with Rx Level ,


Rx Qual, RSCP , EcNo, MOS,
Call Setup time , Start & End
technology, call result , Cell 2G Call status output
Id , LAC & other information

Calling dump process


& status of a call at
Excel share for Planner
every point

3G Call Status output


Cell information with LAC and
Cell ID

Sensitivity: Internal
Calling Dump for Analysis
Project_na Call_in Call_s Call_st Call_sta Call_type Connecting_result Call_end_result Call_Le Setup_ti Call_en Call_en Techn DL_POL RxLev_F LAC Cell_ID CELLNA
me dex tart_T art_La rt_Long ngth_m me d_Latitu d_Long ology QA_MO ull ME
echno titude itude s de itude S
logy

RANISANKAIL 243 LTE 25.899 88.25867 Voice Call Nemo Voice Call Success - Nemo Dropped Call 31743 5.244 25.89911 88.2592 GSM   -85.75 24040 14353 TGRSK1B
Traffic Channel

Nemo Voice Call Success -


RANISANKAIL 243 LTE 25.899 88.25867 Voice Call Nemo Dropped Call 31743 5.244 25.89912 88.2592 GSM   -95.889 24040 14353 TGRSK1B
Traffic Channel

Nemo Voice Call Success -


RANISANKAIL 243 LTE 25.899 88.25867 Voice Call Nemo Dropped Call 31743 5.244 25.89912 88.2592 GSM   -97.778 24040 14353 TGRSK1B
Traffic Channel

RANISANKAIL 243 LTE 25.899 88.25867 Voice Call Nemo Voice Call Success - Nemo Dropped Call 31743 5.244 25.89911 88.2592 GSM   -97.286 24040 14353 TGRSK1B
Traffic Channel

RANISANKAIL 243 LTE 25.899 88.25867 Voice Call Nemo Voice Call Success - Nemo Dropped Call 31743 5.244 25.89911 88.2592 GSM   -98.5 24040 14353 TGRSK1B
Traffic Channel

Nemo Voice Call Success -


RANISANKAIL 243 LTE 25.899 88.25867 Voice Call Nemo Dropped Call 31743 5.244 25.89912 88.2592 GSM   -97.6 24040 14353 TGRSK1B
Traffic Channel

Sensitivity: Internal
Idle and Active Mode Call Analysis
Idle Mode Active Mode

 Accessibility ,

Retainability ,

Coverage KPI

 Serving Cell

 Receive Level

 Receive

Quality

No coverage black spot exist here Call drop occurred here ; this is sudden drop. No coverage
and quality issue found, Neighbor relation found ok.

Sensitivity: Internal
Thanks

8
Sensitivity: Internal

You might also like