Professional Documents
Culture Documents
Pa-Pb Power Distribution For 20W, 10 MHZ
Pa-Pb Power Distribution For 20W, 10 MHZ
PA
Max RS power(dBm)
-6 -4.77 -3 -1.77 0 1 2 3
0 19.4 18.8 17.5 16.7 15.2 14.2 13.2 12.2
1 20.0 19.3 18.2 17.0 15.2 14.2 13.2 12.2
PB
2 20.5 20.0 18.2 17.0 15.2 14.2 13.2 12.2
3 21.2 20.0 18.2 17.0 15.2 14.2 13.2 12.2
PA
Total Power of symbol with RS(W)
-6 -4.77 -3 -1.77 0 1 2 3
0 20.0 20.0 20.0 20.0 20.0 19.3 18.8 18.3
1 20.0 20.0 20.0 18.3 16.7 16.0 15.4 15.0
PB
2 20.0 20.0 16.7 15.0 13.3 12.6 12.1 11.7
3 20.0 16.7 13.3 11.7 10.0 9.3 8.8 8.3
PA
Total Power of symbol without RS(W)
-6 -4.77 -3 -1.77 0 1 2 3
0 13.4 15.0 17.2 18.5 20.0 20.0 20.0 20.0
1 15.0 17.1 20.0 20.0 20.0 20.0 20.0 20.0
PB
2 17.2 20.0 20.0 20.0 20.0 20.0 20.0 20.0
3 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0
NETWORK QUALITY MANAGEMENT | 2016
#GOBEYOND
Pa-Pb Power Distribution for 30W, 10 MHz CUSTOMER
EXPECTATIO
N
PA
Power utilization rate
-6 -4.77 -3 -1.77 0 1 2 3
0 67% 75% 86% 92% 100% 97% 94% 92%
1 75% 86% 100% 92% 83% 80% 77% 75%
PB
2 86% 100% 83% 75% 67% 63% 61% 58%
3 100% 83% 67% 58% 50% 47% 44% 42%
PA
Max RS power(dBm)
-6 -4.77 -3 -1.77 0 1 2 3
0 21.2 20.6 19.3 18.5 17.0 16.0 15.0 14.0
1 21.8 21.1 20.0 18.8 17.0 16.0 15.0 14.0
PB
2 22.3 21.8 20.0 18.8 17.0 16.0 15.0 14.0
3 23.0 21.8 20.0 18.8 17.0 16.0 15.0 14.0
PA
Total Power of symbol with RS(W)
-6 -4.77 -3 -1.77 0 1 2 3
0 30.0 30.0 30.0 30.0 30.0 29.0 28.2 27.5
1 30.0 30.0 30.0 27.5 25.0 24.0 23.2 22.5
PB
2 30.0 30.0 25.0 22.5 20.0 19.0 18.2 17.5
3 30.0 25.0 20.0 17.5 15.0 14.0 13.2 12.5
PA
Total Power of symbol without RS(W)
-6 -4.77 -3 -1.77 0 1 2 3
0 20.0 22.5 25.7 27.7 30.0 30.0 30.0 30.0
1 22.6 25.7 30.0 30.0 30.0 30.0 30.0 30.0
PB
2 25.8 30.0 30.0 30.0 30.0 30.0 30.0 30.0
3 30.0 30.0 30.0 30.0 30.0 30.0 30.0 30.0
NETWORK QUALITY MANAGEMENT | 2016
#GOBEYOND
Pa-Pb Power Distribution for 40W, 10 MHz CUSTOMER
EXPECTATIO
N
PA
Power utilization rate
-6 -4.77 -3 -1.77 0 1 2 3
0 67% 75% 86% 92% 100% 97% 94% 92%
1 75% 86% 100% 92% 83% 80% 77% 75%
PB
2 86% 100% 83% 75% 67% 63% 61% 58%
3 100% 83% 67% 58% 50% 47% 44% 42%
PA
Max RS power(dBm)
-6 -4.77 -3 -1.77 0 1 2 3
0 22.4 21.8 20.5 19.7 18.2 17.2 16.2 15.2
1 23.0 22.3 21.2 20.0 18.2 17.2 16.2 15.2
PB
2 23.5 23.0 21.2 20.0 18.2 17.2 16.2 15.2
3 24.2 23.0 21.2 20.0 18.2 17.2 16.2 15.2
PA
Total Power of symbol with RS(W)
-6 -4.77 -3 -1.77 0 1 2 3
0 40.0 40.0 40.0 40.0 40.0 38.6 37.5 36.7
1 40.0 40.0 40.0 36.7 33.3 32.0 30.9 30.0
PB
2 40.0 40.0 33.3 30.0 26.7 25.3 24.2 23.3
3 40.0 33.3 26.6 23.4 20.0 18.6 17.5 16.7
PA
Total Power of symbol without RS(W)
-6 -4.77 -3 -1.77 0 1 2 3
0 26.7 30.0 34.3 36.9 40.0 40.0 40.0 40.0
1 30.1 34.3 40.0 40.0 40.0 40.0 40.0 40.0
PB
2 34.4 40.0 40.0 40.0 40.0 40.0 40.0 40.0
3 40.0 40.0 40.0 40.0 40.0 40.0 40.0 40.0
Rs Power Calculation for Macro Sites with (Pa,Pb) (-3,1) and (0,0)
Pa=-3 & Pb=1 Pa=0 & Pb=0
Rs Power Calculation for Lamp Site with (Pa,Pb) (-3,1) and (0,0)
Parameter related to LTE Power Control for Huawei, Ericssons, Nokia and ZTE is on attached excel
file.
LTE Power
Control Parameter
Different PA,PB parameter setting will influence the available Rs power and PDSCH power, which will impact the network performance
12.2dBm 9.2dBm
9.2dBm 10.17dBm
9.2dBm 9.2dBm
RS is transmitted in all cells , and when the network load is light , the interference of RS received by PDSCH RBs is lower,
while the RS with higher power will interfere data transmission, so PA,PB=(0,0) setting is better;
When the network load is heavy, then it’s necessary to ensure RS reliability by boosting RS power with 3dB, so PA,PB=(-
3,1) setting is better in heavy network;
PA,PB=(0,0) setting is better in light network while PA,PB=(-3,1) setting is better in heavy network
18.2 / -3 / 1 15.2 / 0 / 0
3/4 1 1
PB Power of type B symbol / Power of type A
Symbol
3/4 1 1
1 ANT port 2 or 4 ANT ports
1 1
X X
compensate 0 1 5/4
3/4 1 1
1 4/5 1
3/4 1 1
2 3/5 3/4
1 1 3 2/5 1/2
R R
3/4 1 1
Bandwidth PB
compensate 3/4 1 1
PRS ( dBm)
10M 1 18.2
1 1
X X
15M 1 16.4
PB3/4
=2 1, 2 1Antennas
20M 1 15.2
3/4 1 1
1 1 2 antennas, 20w per antenna
R R
• RS Power = Total power per channel(dBm) – 10lg(total subcarrier)
+10lg(PB + 1)
x R x R R x R x
R x R x x R x R
Antenna Port 0 Antenna Port 1
Frequency allocation for 1 MHz = 5 Resource Block (RB) * every RB contain 12 Resource Element (RE)
For 10 MHz, Power 20 W EPRE Type A= 20000mW/(10MHz*5*12)=33.33mW=10log(33.33)=15.22dBm
For 10 MHz, Power 40 W EPRE Type A= 40000mW/(10MHz*5*12)=66.66mW=10log(66.66)=18.23dBm
(5-Pb)/4=Eb/Ea (5-Pb)/4=Eb/Ea
(5-1)/4=Eb/Ea (5-0)/4=Eb/Ea
Eb=Ea Eb=1.25Ea
Jika Ea=15.22dBm, Jika Ea=15.22dBm,
Eb=15.22dBm Eb=1.25(15.22dBm)=1.25(33.33mW) =41.63mW=16.19dBm
Jika Ea=18.23 dBm, Jika Ea=18.23dBm,
Eb=18.23dBm Eb=1.25(18.23dBm)=1.25(66.66mW) =83.32mW=19.2dBm