Professional Documents
Culture Documents
ENGINEERING
INDUSTRIES LIMITED,
LAHORE
AIR CLEANING AND EXHAUST
SYSTEMS INSTALLATION
AIR CLEANING AND EXHAUST SYSTEMS
BACKGROUND:
Polishing process dust and buffing at packing shop is going out through exhausts
which is effecting outer environment and is a safety hazard. Due to this, we have
planned to install exhaust systems with water showering in both processes.
PURPOSE:
To remove dust particles of polishing and buff from stations in order to exhaust
clean air in the atmosphere. To provide better indoor and outdoor air quality to
the workers.
OBJECTIVES:
• Improvement of indoor and outdoor air quality.
• Reduce dust from outgoing air after polishing.
• Reduce buff particles from outgoing air after buffing process.
• To make environment clean and safe for workers.
AIR CLEANING AND EXHAUST SYSTEMS
Comments Result
Emery and dust particles from Fender Polish Shop are going freely in the
Problem environment.
Air exhaust system with water showering chamber and cyclone is installed in one Result of 1st hall is
OK
Countermeasure Polishing Hall while same System to be installed in remaining 2 halls
Execution plan for remaining 2 halls is attached.
Before After
Exhaust fans
in Fender
Polish shop Air Exhaust
System with
Water
Showering
Chamber and
Cyclones
Before After
Air Exhaust System with
Exhaust Water Showering
fans in Rim Chamber and Cyclone
Polish Shop installation is in process
Before After