Professional Documents
Culture Documents
Maarten Vissers
Consulting Member of Technical Staff
Lucent Technologies
email: mvissers@lucent.com
April 2002
Contents
OTN Rationale
OTN Layer Networks
Multi level Connection Monitoring
OTM Signals
Maintenance Signals
Mapping Client Signals
Multiplexing
Virtual Concatenation
OTN Standards
April 2002
Contents
OTN Rationale OTN Characteristics
OTN Layer Networks Transitional Approaches
Multi level Connection Final Phase
Monitoring O/E/O processing
OTM Signals objectives
Maintenance Signals Digital processing
objectives
Mapping Client Signals
Multiplexing
Virtual Concatenation
OTN Standards
April 2002
OTN Characteristics
New transport networking layer (carrier grade solution)
• Next step (after SDH/SONET) to support ever growing data
driven needs for bandwidth and emergence of new broadband
services
– Terrabit/second per fiber via DWDM lines (transport level)
– Gigabit/second paths at 2.5 Gb/s, 10 Gb/s, 40 Gb/s
(networking level)
• Service transparency for SDH/SONET, ETHERNET, ATM, IP,
MPLS
– No change of SDH/SONET!
– One exception; interpretation of STM-LOF alarm + STM-
AIS due to OTN fail
• Enhanced OAM & networking functionality for all services
• Shortest physical layer stack for data services (IP OTN
Fiber)
April 2002
OTN Characteristics
April 2002
Transitional Approaches - Assessment
April 2002
Transitional Approaches - Assessment
April 2002
O/E/O Objectives
Minimise O/E/O processing in OTN
• O/E/O processing at edges of administrative/vendor
(sub)domains
– Span engineering
• O/E/O processing at edges of protected or switched domain
– Span engineering (short/long route effects)
– Signal Fail & Signal Degrade condition determination
If more than 1 optical transparent subnetwork is included
• O/E/O processing at intermediate points
– Span engineering (long line sections)
– Losses in optical fabrics
• O/E & E/O processing around electrical fabric
April 2002
Digital Processing Objectives
April 2002
Contents
OTN Rationale
OTN Layer Networks Layer Networks
Multi level Connection Client Signals
Monitoring Optical Channel Structure
OTM Signals Containment Relationships
Maintenance Signals Example of Layer Network
Mapping Client Signals Trails
Multiplexing OTN Interfaces
Virtual Concatenation Standardised and
"Proprietary" Stacks
OTN Standards
April 2002
OTN Layer Networks & Client Signals
Three new layer
networks:
IP/MPLS ATM ETHERNET STM-N Interworking
• one "Gbit/s" path with pre-OTN
layer
– OCh STM-N GbE
Optical Channel (OCh)
• two section layer network
layers
– OMSn OTM Optical Multiplex Section (OMSn)
– OTSn Physical layer network
• single channel Section
section layer: Optical Transmission Section (OTSn)
(OPSn) layer network
– OPS0
Client signals:
OTM-0 Optical Transport Module of order n
• IP/MPLS
OTM-nr, n>1 (OTM-n, n1)
• ATM
• Ethernet
• STM-N April 2002
Optical Channel Structure
Optical Channel layer
IP ATM ETHERNET STM-N
network consists of 3+1
structures:
• Digital: Optical Channel Payload Unit
– OCh Data Unit (OPUk)
(ODUk)
– OCh Payload Unit Optical Channel Data Unit (ODUk)
(OPUk, k=1,2,3)
– OCh Transport ODUk CF
Unit (OTUk, OPUm (m>k)
TDM
OTUkV)
ODUm (m>k)
STM-N
• Analogue: OCh
GbE
Optical Channel Transport Unit
Multiplexing (TDM) (OTUk, OTUkV)
• ODUk multiplexing
ODUk virtual Optical Channel (OCh)
concatenation OCh CF
CF: Connection Function April 2002
OTN Containment Relationships
Client
STM-N
ODUk
OCh, OTUk OCh, OTUk OCh, OTUk
OMSn OMSn OMSn
OPS0 OTSn OTSn OTSn OTSn OTSn OSn
DXC 3R 3R
OTM-0
LT R OCADM 3R R LT
DXC
OTM-n
3R
STM-N
Client
ODXC Client
LT Line Terminal w/ optical channel multiplexing
OCADM Optical Channel Add/Drop Multiplexer
ODXC ODU Cross-Connect
3R O/E/O w/ Reamplification, Reshaping & Retiming and monitoring
R Repeater
April 2002
OTN Interfaces
User to Network Interface (UNI)
Network Node Interface (NNI)
• Inter Domain Interface (IrDI)
• Intra Domain Interface (IaDI)
between equipment of different vendors (IrVI)
within subnetwork of one vendor (IaVI)
Vendor X Vendor Y
April 2002
Standardised & "Proprietary" stacks
OTM-n.m OPUk
• optical parameters
ODUkP
• number of ODUk
substructure
wavelengths ODUkT
OCh
• bit rates of
wavelengths OTUkV OTUk OTUkV OTUk
• supervisory
channel OCh OChr
OTUkV
OMSn
• FEC
OPSn
• frame format
OTSn
• ODUk mapping
used between (and within) OTN
transparent subnetworks OTM-n.m OTM-0.m
Full Reduced OTM-nr.m
used within OTN transparent
subnetworks; implementations
functionality functionality
are very much technology dependent April 2002
Contents
OTN Rationale
OTN Layer Networks
Multi level Connection
Monitoring Application
OTM Signals Nesting
Maintenance Signals Overlapping
Mapping Client Signals
Multiplexing
Virtual Concatenation
OTN Standards
April 2002
Multi-level Connection Monitoring:
Applications
Status
QoS ofofclient
QoSprovided
of working
provided [protection]
signal
by leased
leased circuitisconnection
transport
circuit is
ismonitoredisbymonitored
monitored
monitored byODUk
byUser
User
Service
Network for
switched circuit: UNI-UNI CM
Provider
Operator
SF and SD switch conditions to initiate "connection re-establishment"
Path CM Client
Signal
Verify QoS CM USR2
NO A
UNI-UNI CM ODUk
NO B
NO C
NNI-NNI CM
W/P CM Working
USR1
Protection
ODUk
Client
Signal
April 2002
Multi-level Connection Monitoring:
Nesting
A1 B1 C1 C2 B2 B3 B4 A2
C1 - C2
B1 - B2 B3 - B4
A1 - A2
April 2002
Multi-level Connection Monitoring:
Nesting and Overlapping
A1 B1 C1 B2 C2 A2
C1 - C2
B1 - B2
A1 - A2
April 2002
Contents
OTN Rationale
OTM Interface Signals
OTN Layer Networks
• OTM-16r.m
Multi level Connection • OTM-0.m
Monitoring • OTM-n.m
OTM Signals OTM Signals versus OTN I/F
Maintenance Signals OTM Overhead Signal
Mapping Client Signals Frame Formats
• OTUk, ODUk
Multiplexing
Overhead
Virtual Concatenation
• OTUk, ODUk
OTN Standards
OTUkV
Overhead versus OTN I/F
April 2002
OTM-16r.m Signal (m=1,2,3,12,23,123)
1 16 17 3824 3825 4080
1 t,
en Uk
nm OP
2 lig k & d Payload OTUk FE C
eA DU ea (4 x 3808 bytes) (4 x 256 bytes)
3 am O erh
Fr Uk, Ov
T
4 O
OTM-16r.m
1 16 17 3824 3825 4080
1 t, k
en P U
nm O
2 lig k & d Payload OTUk FE C
eA DU ea (4 x 3808 bytes) (4 x 256 bytes)
3 am , O erh
Fr Uk Ov
4 OT
1 16 17 3824 3825 4080
1 t, k
en P U
nm O
2 lig k & d Payload OTUk FE C
eA DU ea (4 x 3808 bytes) (4 x 256 bytes)
3 am O erh
Fr Uk, Ov
T
4 O
1 16 17 3824 3825 4080
1 t
en Uk
nm OP
2 lig &
eA Uk ead Payload OTUk FE C
3 am D rh (4 x 3808 bytes) (4 x 256 bytes)
Fr k, OOve
TU
4 O
1 16 17 3824 3825 4080
1 t,
en P Uk
nm O
2 lig k & d Payload OTUk FE C
eA DU ea (4 x 3808 bytes) (4 x 256 bytes)
3 am O erh
Fr Uk, Ov
4 OT
OTM-0.m
1 16 17 3824 3825 4080
1
d P t,
Uk
ea & O en
erh Uk nm
2
Ov OD lig
Payload OTUk FE C
k, eA
3 (4 x 3808 bytes) (4 x 256 bytes)
TU m
O Fr a
4
April 2002
OTM-n.m Signal (m=1,2,3,12,23,123)
n
1 16 17 3824 3825 4080
1
d P ,
ea & O nt
Uk
erh k me
2
Ov D U lign
Payload OTUk FE C
, O eA
3 (4 x 3808 bytes) (4 x 256 bytes)
O Fr am
k
TU
4
d P ,
ea & O nt
Uk
erh k me
2
Ov D U lign
Payload OTUk FE C
, O eA
(4 x 3808 bytes) (4 x 256 bytes)
3
O Fr am
k
TU
4
1 16 17 3824 3825 4080
1
d P ,
Uk
ea & O nt
erh k me
2
Ov D U lign
Payload OTUk FE C
, O eA
3 (4 x 3808 bytes) (4 x 256 bytes)
3
O Fr am
k
TU
4
1 16 17 3824 3825 4080
1
ea & O nt
Uk
erh k me
d P
2
Ov D U lign
Payload OTUk FE C
, O eA
3 (4 x 3808 bytes) (4 x 256 bytes)
O Fr am
k
TU
4
d P ,
ea & O nt
Uk
erh k me
Ov D U lign
2
Payload OTUk FE C
, O eA
(4 x 3808 bytes) (4 x 256 bytes)
O Fr am
3
k
TU
4
OSC
April 2002
OTM Overhead Signal (OOS)
«Non-associated overhead»
OOS functions subject to standardization OCh OH extensions may be
expected in future to support e.g.
OOS bit rate & format not standardized OCh protection (e.g. OCh SPring)
FDI-O
Non-Associated
n
TTI FDI-P 3
overhead
2
1
BDI-O BDI-O FDI-O
Vendor
BDI-P BDI-P FDI-P Specific
OMSn
OTSn
OCh
PMI PMI OCI
4080
14
15
16
17
1
7
8 OTUk
1 Alignm
OH
OPUk OH
2 Client Signal
OTUk
mapped
OPU in
k Payload
3 ODUk FEC
OPUk Payload
4
Client Signal
OPUk - Optical Channel Payload Unit
ODUk - Optical Channel Data Unit k indicates the order:
1 2.5G
OTUk - Optical Channel Transport Unit
2 10G
Alignment 3 40G
April 2002
OTUk and ODUk Overhead (k=1,2,3)
«Associated overhead»
Column
Row 1 7 8 14 15 16
FRAME ALIGNMENTOTUk
1 AlignmFAS OVERHEAD AREA
MFAS OTUk
SMSPECIFIC OVERHEAD AREA RES JC
OPUk SPECIFIC
GCC0 RES
OH
OPUk OH
OVERHEAD
Mapping
2 TCM
RES TCM6 TCM5 TCM4 FTFL RES JC
& Concat
AREA
ACT
OPU k Payload Specific
3 TCM3 ODUk TCM2 ODUk SPECIFIC
TCM1OVERHEAD AREA
PM EXP RES JC
FTFL 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 1 6 7 8
BDI
Identifier
1 2 3 4 5 TTI 6 7 8 1 2 3 4PSI: 5BIP-8 Identifier
6 Payload
7 8 1Structure
2 3 BEI 4Identifier
5 6 7 STAT 8
EXP: Experimental Mapping
BDI
TCMi
IAE
TTI BIP-8ReservedBEI/BIAE forBEI/BIAE RES
BDI
FAS:FaultFrame Alignment TTI Signal RES:
BIP-8 future international & Concat
Forward Fault Backward STAT
FTFL: Fault Type & Fault Location Indicationstandardisation
Indication 255 Specific
Field reporting
0 channel 15 16 31SM:Field Section Monitoring
32 63
GCC: General SourceCommunication
Access Channel
Destination Access TCM: Tandem Connection Monitoring
TTI Operator Specific
Point Identifier Point Identifier
April 2002
OTUkV (k=1,2,3)
Frame format is vendor specific
Forward Error Correction code is vendor specific
Minimum overhead set to support is:
• Trail Trace Identifier
• Error Detection Code (e.g. BIP)
• Backward Defect Indicator
• Backward Error Indicator
• (Backward) Incoming Alignment Error
Other overhead is vendor specific
ODUk mapping into OTUkV is vendor specific
April 2002
Overhead versus OTN Interfaces
OTM Interface Ports on IP Router, ATM Switch, Ethernet
Switch and SDH equipment should support the
following minimum set of overhead
• OPUk Client Specific
• OPUk Payload Structure Identifier (PSI)
• ODUk Path Monitoring (PM)
• OTUk Section Monitoring (SM)
• Frame Alignment (FAS, MFAS)
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
1 FAS MFAS SM
OTUk FEC
Client
Payload
OPUk
2
Specific
3 PM
4 PSI
all-0's pattern
April 2002
Overhead versus OTN Interfaces
Overhead passed through network
• OTM UNI to OTM UNI
• OTM NNI IrDI to OTM NNI IrDI
April 2002
Overhead versus OTN Interfaces
Overhead passed through network from OTM UNI to
OTM UNI interface
• OPUk PSI, Client Specific
• ODUk PM, TCM ACT, TCM1..TCMn, TCM ACT, RES
• ODUk GCC1, GCC2 according contract
• ODUk APS/PCC definition is under study
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
OTUk FEC
Client
Payload
TCM
RES TCM6 TCM5 TCM4 FTFL
OPUk
2
ACT Specific
3 TCM3 TCM2 TCM1 PM EXP
4 GCC1 GCC2 APS/PCC RES PSI
April 2002
Overhead versus OTN Interfaces
Overhead passed through network from OTM NNI IrDI
to OTM NNI IrDI interface
• OPUk PSI, Client Specific
• ODUk PM, TCM ACT, TCM1..TCMm, TCM ACT, FTFL, RES
– "m" in TCMm > "n" in TCMn (UNI-UNI)
• ODUk GCC1, GCC2 according contract
• ODUk APS/PCC definition is under study
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
OTUk FEC
Client
Payload
TCM
RES TCM6 TCM5 TCM4 FTFL
OPUk
2
ACT Specific
3 TCM3 TCM2 TCM1 PM EXP
4 GCC1 GCC2 APS/PCC RES PSI
Virtual Concatenation
Locked (LCK)
Fault Type & Fault Location
OTN Standards (FTFL)
April 2002
OTN Maintenance Signals:
Alarm Suppression
R use of OTN maintenance
signals FDI, AIS and PMI will
reduce number of alarms
from 500k to 1 per broken fiber
R
use of OTN maintenance at 3R point OCh-FDI
signal OTS-PMI (and OMS-PMI) is converted into
at line termination point
will prevent OTS [OMS] LOS alarm ODUk-AIS
when none of s is presentOCh-FDI
OMS-FDI is converted
OCh-FDI into OCH-FDI
OMS-FDI OCh-FDI
IS
3R
R
A
k-
U
OTS-PMI OTS-PMI
D
O
1000 /fiber R
x 96 fibers/cable
x 5 cables/duct OCh-FDI
= 500k lost signals
==> 500k LOS alarms in network April 2002
OTN Maintenance Signals:
Alarm Suppression (FDI, AIS)
Ethernet
(STM-N)
AIS/FDI at
MPLS
ATM
CBR
IP
• clients
MPLS-FDI
gen-AIS
VP-AIS
?
ODUk-AIS
AIS at
ODUk
ODUk-AIS
• ODUk
AIS at
OTUk
OTUk-AIS
• OTUk
FDI at
OCh
OCh
OCh
OCh
OCh
OCh
Future server layer
• OCh
OCh-FDI
OCh-FDI
OCh-FDI
OCh-FDI
OCh-FDI
OCh-FDI
OMSn
FDI/PMI at
OMSn-FDI
OMSn-PMI
• OMSn
OTSn
PMI at
OTSn-PMI
• OTSn
April 2002
OTN Maintenance Signals:
Alarm Suppression (FDI, AIS)
Generated at egress of OMSn, OCh and ODUk Link
Connections
Inserted on detection of Signal Fail
OMSn-FDI and OCh-FDI
• is non-associated overhead
ODUk-AIS
• is special ODUk signal pattern (0xFF)
1 78 14 17 3824
1 FA OH OTUk OH
STAT
STAT
STAT
FTFL
2
All-1's pattern
STAT
STAT
STAT
STAT
April 2002
Generic-AIS [STM-AIS]
New maintenance signal @ STM-N level
• a continuous repeating 2047-bit PN-11 (1 + x9 + x11) sequence
Generated in OTN tributary ports
• ingress trib: on detection of STM-N LOS
• egress trib: on detection of ODUk signal fail type defect
To be detected in SDH line/trib ports in addition to STM-LOF as
"STM-AIS"
In existing equipment detected as STM-LOF
insertion
April 2002
OTN Maintenance Signals:
Backward Information (BDI, BEI)
Ethernet
(STM-N)
RDI/REI at
MPLS
ATM
CBR
RDI RDI
IP
? BDI ?
REI REI • Clients
BDI/BEI at
ODUk
ODUk-BDI
ODUk-BEI • ODUk
• OTUk
OTUk
OTUk-BDI
OTUk-BEI
No BI at
OCh
OCh
OCh
OCh
OCh
OCh
Future server layer
• OCh
OMSn-BDI-P OMSn
OMSn-BDI-O BDI at
• OTSn
OTSn-BDI-P
OTSn-BDI-O
OTSn • OMSn
April 2002
OTN Maintenance Signals:
Open Connection Indication (OCI)
Generated in a Fabric
Inserted when output port is not connected to input
port
OCh-OCI
• is non-associated overhead
ODUk-OCI
• special ODUk signal pattern (0x66)
1 78 14 17 3824
1 FA OH OTUk OH
STAT
STAT
STAT
2
Repeating "0110 0110" pattern
STAT
STAT
STAT
STAT
April 2002
OTN Maintenance Signals:
Locked (LCK)
Generated in ODUk Tandem Connection endpoint
Inserted when Administrative State is Locked
• to block a user to access the connection
• to prevent test patterns within the network entering a user
domain
ODUk-LCK
• special ODUk signal pattern (0x55)
1 78 14 17 3824
1 FA OH OTUk OH
STAT
STAT
STAT
2
Repeating "0101 0101" pattern
STAT
STAT
STAT
STAT
April 2002
Fault Type & Fault Location (FTFL)
Helps Service Provider to automatically locate fault/degradation to
specific Network Operator domain
No need to call around any longer
Section and Tandem Connection endpoints insert FTFL in forward
direction on detection of SF or SD condition
Specific FTFL function at UNI
• extracts forward info and sends it in opposite direction as backward info
• filters outgoing and incoming FTFL information (security issue)
Specific FTFL extraction function
• reads FTFL forward and backward information at intermediate point along
connection NO A
CPE1
X:A X:SP
NO C NO D
NO B CUSTOMER
IrDI
IrDI
IrDI
IrDI
IrDI
IrDI
ODUk Path Termination ODUk UNI Tandem Connection Termination ODUk Tandem Connection Termination OTUk Section Termination Equipment
April 2002
Contents
OTN Rationale
OTN Layer Networks
Multi level Connection
Monitoring
OTM Signals
Maintenance Signals
CBR (e.g. STM-N)
IP, ETHERNET
Mapping Client Signals
ATM
Multiplexing
Test Signals
Virtual Concatenation
Bit stream with/without
OTN Standards octet timing
Bit Rate Agnostic CBR
April 2002
Mapping STM-N (N=16,64,256)
3824
17
18
PSI RES RES RES 15
NJO JC JC JC 16
G.709 provides 1 DD 3805D D
two mappings for
STM-16
2 DD 3805D D
STM-N signals
3 DD 3805D D
• bit synchronous
PJO
4 D 3805D D
• asynchronous
1905
1921
3824
1904
1920
G.709 defines
NJO JC JC JC 16
17
PSI RES RES RES 15
interworking 1 118 x 16D 16FS 119 x 16D
STM-64
• common
PJO
1280
1281
2560
3824
1265
2544
2545
2561
PSI RES RES RES 15
NJO JC JC JC 16
17
fixed
2 78 x 16D 16FS 79 x 16D 16FS 79 x 16D
Justification
Control (JC) 3 78 x 16D 16FS 79 x 16D 16FS 79 x 16D
PJO
D: Data, FS: Fixed Stuff, JC: Justification Control, N/PJO: Negative/Positive Justification Opportunity
April 2002
Mapping IP and Ethernet
G.709 provides an encapsulation for packet based client signals
There is no need for SDH or 10G-Ethernet to encapsulate IP
A new protocol is being defined: Generic Framing Procedure
• a generic mechanism to carry any packet signal over fixed rate channels
(e.g. SDH, SONET and OTN's ODUk) - ITU-T Rec. G.gfp
15 16 17 3824
PSI RES RES RES
RES RES RES RES
OPUk
OPUk Payload Bandwidth for GFP stream in
Overhead 0 PT
GFP Frame GFP Idle Frame ODU1: 2 488 320 kbit/s
1
PSI ODU2: 9 995 276 kbit/s
RES ODU3: 40 150 519 kbit/s
255
4 4-65535 4
bytes bytes
April 2002
Generic Framing Procedure G.7041
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Bit TYPE
Null Header
5 <15:08>
Octet 1 2 3 4 5 6 7 8
1 PLI <15:08>
6 TYPE <07:00>
1
2 PLI <07:00>
7 tHEC <15:08>
2
3 cHEC <15:08>
Core 8 tHEC <07:00>
PFI
4 cHEC <07:00> 5 PTI EXI
3 Header
1 2 3 4 5 6 7 8
6 UPI
4
5 5 TYPE <15:08>
6 1 2 3 4 5 6 7 8
6 TYPE <07:00>
7 5
7 tHEC <15:08>
8 Payload
8 tHEC <07:00> 1 2 3 4 5 6 7 8
Payload 9 9 CID
Area <07:00>
Header
10 Spare <07:00>
X+4 11 eHEC <15:08>
Extension
X+5 Header 12 eHEC <07:00>
N
N 65536 Linear with Frame
Multiplexing
GFP Frame Payload
Information X+3 eHEC <15:08>
Bit Field X+4 eHEC <07:00> CID: Channel ID
Octet 1 2 3 4 5 6 7 8 4 X 64 EXI: Extension Header ID
1 00 (B6) hex FCS: Frame Check Seq
00 (AB) hex HEC: Header Error Check
Payload FCS
15 16 17 3824
PSI RES RES RES
RES RES RES RES
OPUk Payload
OPUk
Overhead 0 PT
1 ATM cell
PSI Bandwidth for ATM stream in
RES
ODU1: 2 488 320 kbit/s
255
53 bytes
ODU2: 9 995 276 kbit/s
ODU3: 40 150 519 kbit/s
April 2002
Mapping Test Signals
G.709 provides a mapping for test signals
Two test signals are defined
• NULL sequence (all-0's)
Column
Row 15 16 17 18 3824
1 RES RES
2 RES RES
All-0's pattern
3 RES RES
4 PSI RES
255
April 2002
Mapping Test Signals
Two test signals are defined (continued)
• 2 147 483 647-bit Pseudo Random Binary Sequence (PRBS)
1 + x28 + x31
– groups of 8 successive PRBS bits are mapped into a data byte
3824
PSI RES RES RES 15
RES RES RES RES 16
17
18
1 DD 3805x D D
2 DD 3805x D D
3 DD 3805x D D
4 DD 3805x D D
2 CS CS
3 CS CS
4 PSI CS
April 2002
Contents
OTN Rationale
OTN Layer Networks
Multi level Connection
Monitoring
OTM Signals
Maintenance Signals
Wavelength Division
Mapping Client Signals Multiplex (WDM)
Multiplexing Time Division Multiplex
Virtual Concatenation (TDM)
OTN Standards
TDM Tributary Slots
TDM Overhead
TDM Mapping
April 2002
Wavelength Division Multiplex
OTM-16r.m signal
• 16 channels
• fixed 200 GHz grid independent of bit rate of OCh signal
• designed for interworking purposes
OTM-n.m signal
• no predefined number of channels
• no predefined grid
• grid may depend on bit rate of OCh signal
– e.g. 25, 50, 100 GHz for OTU1, OTU2, OTU3 resp.
• developments in technology are driving capabilities
April 2002
Wavelength Division Multiplex - Structure
OTM-0.m
x1 x1
OCCr OChr
xi
x1 xj x1 x1
OTM-nr.m OCG-nr.m OCCr OChr
OTU3[V]
xk
1 i+j+k n x1
OCCr OChr
x1 OTU2[V]
x1 x1
OCC OCh
xi
OTU1[V]
x1 xj x1 x1
OTM-n.m OCG-n.m OCC OCh
xk
x1 1 i+j+k n x1 x1
OCC OCh
April 2002
Time Division Multiplex
TDM muxing is muxing of ODUk signals into higher
order ODUk signals
• ODU1 into ODU2
• ODU1 and/or ODU2 into ODU3
– ODU1 into ODU2 into ODU3 is possible, but not the
recommended method when ODU1s are the service signals that
are to be switched/cross connected within an "ODU3 network"
– if ODU1s enter such ODU3 network via ODU2, the ODU2 is
terminated at the edge and the ODU1s are remultiplexed into an
ODU3
– if ODU2 is service signal, of course no demuxing/remuxing will
occur at edges
Multiplexing via byte interleaving
April 2002
Time Division Multiplex - Structure
x1 x1 Client Signal
OTU3[V] ODU3 OPU3
x1 x 16
ODTUG3
x4
x1 Client Signal
x1 ODU2 OPU2
OTU2[V]
x1
ODTUG2
x4
x1 ODU1 x1 Client
OTU1[V] OPU1
Signal
Multiplexing Mapping
April 2002
Time Division Multiplex - artist impression
4x ODU1 into ODU2
payload Alignm
OPU1 OH
Client Layer Signal
• ODU1 adapted to ODU1
ODU1 OH (e.g. STM-16, ATM, GFP)
ODU2 clock via
justification
4x
• adapted ODU1
signals byte
interleaved into OPU2 Alignm
OPU2 OH
Alignm
OPU1 OH
Alignm
OPU1 OH
Client Layer Signal
• ODU2 and OTU2 Alignm
OPU1 OH
Client(e.g.
Layer Signal
ODU2 ODU1 OH STM-16)
OPU1 OH
ODU1 OH Client(e.g.
Layer Signal
STM-16)
Client(e.g.
Layer Signal
ODU2 OH ODU1 OH STM-16)
overhead added ODU1 OH (e.g. STM-16, ATM, GFP)
ODU1 floats in ¼ of
the OPU2
ODU1 frame will Alignm OTU2
OH
Alignm
OPU2 OH
Alignm
OPU1 OH
cross an ODU2 frame Alignm
OPU1 OH
Client Layer Signal
OTU2 Alignm OTU2
OPU1 OH
ODU1 OH Client(e.g.
Layer Signal
STM-16)
ODU1 OH OPU2 Payload
OPU1 OH Client(e.g.
Layer Signal
STM-16) FEC
boundary ODU2 OH ODU1 OH
ODU1 OH
Client(e.g.
Layer Signal
STM-16)
(e.g. STM-16, ATM, GFP)
NOTE - The ODU1 floats in ¼ of the OPU2 Payload area. An ODU1 frame will cross multiple ODU2 frame boundaries.
A complete ODU1 frame (15296 bytes) requires the bandwidth of (15296/3808 = ) 4.017 ODU2 frames. This is not illustrated.
April 2002
78
11
10
01
00
MFAS
bits Row
4
3
2
1
4
3
2
1
4
3
2
1
4
3
2
1
1
Column
OPU2 Payload
OPU2 Payload
OPU2 Payload
OPU2 Payload
(4 x 3808 bytes)
(4 x 3808 bytes)
(4 x 3808 bytes)
(4 x 3808 bytes)
ODU2 Tributary Slot Allocation
1111
0001
0000
MFAS
bits Row
4
3
2
1
4
3
2
1
4
3
2
1
1
Column
OPU3 Payload
OPU3 Payload
OPU3 Payload
(4 x 3808 bytes)
(4 x 3808 bytes)
(4 x 3808 bytes)
3821
3822
OPU3 TribSlot 15 OPU3 TribSlot 15 OPU3 TribSlot 15 3823
April 2002
3822
3823
3824
3821
15
16
17
Row
1
JC
2
JC
OPUk Payload
(4 x 3808 bytes)
3
JC
NJO
PSI
4 PJO
1 2 3 4 5 6 7 8
0 JC Reserved JC
1 Reserved
2 OPU2 OPU3
MFAS MFAS
MSI
PJO1 17
18
19
20
18
19
PJO2 21
22
23
24
PJO1 17
32
PJO2 33
34
35
48
bits 78 bits 5678
00 0000
17
PJO1
PJO1
PJO2
PJO2
18
01 0001
PJO1
PJO2
PJO1
PJO2
10 0010
Reserved
PJO1
PJO2
11
PJO1
PJO2
1111
255
April 2002
Time Division Multiplex - Mapping
Asynchronous mapping of ODU information bytes
-1, 0, +1, +2 byte justification control
ODU1 into ODU3 mapping includes Fixed Stuff column
• ODU1 into ODU2 and ODU2 into ODU3 mapping is without
fixed stuff
Column
3824
3808
3809
3823
1919
1920
1921
1904
1905
17
31
32
33
Row 1 16
1
OPU3 TribSlot 16
OPU3 TribSlot 16
OPU3 TribSlot 15
OPU3 TribSlot 16
FF15
OPU3 TribSlot 15
OPU3 TribSlot 1
IX TribSlot 1
OPU3 TribSlot 1
OPU3 TribSlot
2 OPU3 Payload OPU3 Payload
U
ST
JOH
transporting transporting
3 16x ODU1 ED 16x ODU1
FOPU3
PSI
April 2002
Contents
OTN Rationale
OTN Layer Networks
Multi level Connection
Monitoring
OTM Signals
Maintenance Signals
Mapping Client Signals
ODUk-Xv
Multiplexing
OPUk-Xv Overhead
Virtual Concatenation
Mapping Client signals
OTN Standards
April 2002
Virtual Concatenation
Virtual Concatenated ODUk's
• ODUk-Xv, with X=1..256
Provide
• Ability to transport STM-64 and STM-256 signals via fibers
not supporting 10G and/or 40G wavelengths
– STM-64 into ODU1-4v
– STM-256 into ODU2-4v or ODU1-16v
• Finer granularity bandwidth for data signals
– X * 2G5 [10G] [40G] via ODU1-Xv [ODU2-Xv] [ODU3-Xv]
– Application of Link Capacity Adjustment Scheme (LCAS,
Rec. G.7042) offers
Hitless bandwidth modification
Build in resilience when signal components routed via
two or more diverse routes
April 2002
Virtual Concatenation - Inverse muxing
3823X+1
3824X
14X+1
14X+2
15X+1
15X
16X
1
Mapping of
2 client signal
3
OPUk-X Payload
into OPUk-X
4
Inverse muxing
OPUk-Xv OH OPUk-Xv Payload (4 x 3808 x X bytes) of OPUk-X
(8 x X bytes)
signal into X
OPUk signals
15 16 17 18 3824
ODUk overhead
1 is added to
each of the X
VCOH
2
15 16 3824
1
3 OPUk signals
OPUk-Xv
4 PSI
VCOH
Mapping specific
00001 1 MFI2 8 9 CRC8
• MFI1, MFI2 2
VCOH
Row#
2 00010 2 Reserved CRC8
• SQ 3
VCOH
3 00011 3 Reserved CRC8
• LCAS 4 PSI
SQ CRC8
– CTRL 00100 4
RSA
GID
– GID 00100 5 CTRL RES CRC8
– RSA 0 PT
– MST 1
2
vcPT Member Status
– MST CRC8
CRC8 Reserved (0 - 255)
– Res
RES
255
11111 31 CRC8
1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4
254
255
RSA: RS-Ack
MSB LSB MSB LSB MSB LSB
April 2002
Row
4
3
2
1
ATM
Column
STM-N
VCOH 14X+1
PSI
Test signals
VCOH 15X
PSI
• asynchronous
JC JC JC JC
• bitsynchronous
JC JC JC JC
15X+1
JC JC JC JC
4
3
2
1
NJO NJO NJO NJO
PJO PJO PJO PJO 15X+5 GFP (IP, ETH, MPLS)
4
3
2
1
X=16
15231D
15231D
15231D
15231D
JC JC JC JC 15X+2 JC JC JC JC 15X+1
JC JC JC JC 15X+3 JC JC JC JC 15X+2
NJO NJO NJO NJO 16X JC JC JC JC 15X+3
JC JC JC JC 967X+4
PJO PJO PJO PJO 16X+1 NJO NJO NJO NJO 16X
JC JC JC JC
16X+2 PJO PJO PJO PJO 16X+1
JC JC JC JC
16X+3 16X+2
NJO NJO NJO NJO
17X 16X+3
PJO PJO PJO PJO 968X+9
17X
15231D
15231D
15231D
15231D
4 x 118 x 16D - 1
4 x 118 x 16D - 1
4 x 118 x 16D - 1
4 x 118 x 16D - 1
JC JC JC JC 1919X+9
JC JC JC JC
JC JC JC JC 1904X
NJO NJO NJO NJO
190X+1
PJO PJO PJO PJO 1919X+13
X=4
4 x 3808D - 1
4 x 3808D - 1
4 x 3808D - 1
4 x 3808D - 1
4 x 16FS
4 x 16FS
4 x 16FS
4 x 16FS
1920X
Virtual Concatenation - Mapping
1920X+1
15231D
15231D
15231D
15231D
JC JC JC JC 2871X+13
JC JC JC JC
JC JC JC JC
NJO NJO NJO NJO
PJO PJO PJO PJO 2871X+18
4 x 119 x 16D
4 x 119 x 16D
4 x 119 x 16D
4 x 119 x 16D
STM-64 into OPU1-4v
15231D
15231D
15231D
15231D
STM-256 into OPU1-16v
April 2002
STM-256 into OPU2-4v
April 2002
OTN Standards in ITU-T - Transport Plane
Framework G.871 (10/00)
Network Architecture G.872 (10/01)
Structures and bit rates G.709 (02/01), G.709 am.1 (10/01)
Equipment G.798 (10/01)
Equipment Management Function G.874 (10/01), G.7710 (11/01)
Protection G.gps (2002), G.otnprot (2002)
Data Communication Network G.7712 (10/01)
Jitter & Wander Performance G.8251 (2002)
Error Performance G.optperf (2002)
Physical G.959.1 (02/01), G.693, G.dsn (2003)
Information Model G.874.1 (10/01), G.875 (2002)
Optical Safety G.664 (06/99)
Generic Framing Procedure G.7041 (10/01)
Link Capacity Adjustment Scheme G.7042 (10/01)
Bringing into Service & Maintenance M.24otn (2003)
Q factor measurement O.qfm (?)
April 2002
OTN Standards in ITU-T - Control Plane
Automatic Switched Transport G.807 (05/01)
Network
Automatic Switched Optical Network G.8080 (10/01)
Distributed Connection Management G.7713 (10/01)
Automatic Discovery Techniques G.7714 (10/01)
Routing G.7715 (2002)
Signalling Communication Network G.7712 (10/01)
Link Resource Manager G.7716 (2002?)
April 2002
OTN Standards in ITU-T
ITU-T OTN Recommendations
Transport Plane Network Architecture Framework for OTN Rec's
(G.872) (G.871/Y.1301)
April 2002
OTN Standards in ITU-T
ITU-T Recommendations
Automatic Switched
Control Plane Transport Network
(G.807)
Automatic Switched
Optical Network
(G.8080)
Distributed Call & Connection Automatic Neighbor Discovery Link Resource Manager
Management Techniques (G.7716)
(G.7713, G.7713.x (x=1,2,3)) (G.7714)
April 2002
THANK YOU