Professional Documents
Culture Documents
APPLIANCES
Notes from IS code by Rajendra P. Hire
1. FIXING OF FOOT RESTS –
• Foot rests shall be of Vitreous China conforming to IS 2556 (Part X).
• One end of the stay shall be bent for embedding in the wall in c.c.
block of size 20 x 10 x 10 cm in 1:2:4 mix.
• The concrete shall be finished to match with the surrounding surface.
6. PILLAR TAPS –
• It shall be chromium plated brass.
• It shall conform to IS 1795.
• The nominal sizes of the pillar tap shall be 15 mm or 20 mm as
specified.
• The nominal size shall be designated by the nominal bore of the pipe
outlet to which the tap is to be fitted.
• Finished weights of 15 mm and 20 mm pillar tap shall be as
mentioned below.
MINIMUM FINISHED WEIGHTS OF PILLAR TAPS
PARTICULARS WEIGHTS IN GMS
15 MM SIZE 20 MM SIZE
BODY 255 505
WASHER PLATE 15 28
LOOSE VALVE
BACK NUT 40 50
TAP 650 1175
• Casting shall be sound and free from laps, blow hole and pitting.
• External and internal surfaces shall be clean, smooth and free from
sand and be neatly dressed.
• The body , bonnet and other parts shall be machined true so that
when assembled , the parts shall be axial, parallel & cylindrical with
surfaces smoothly finished.
• The area of waterway through the body shall not be less than the area
of the circle of dia. equal to the bore of seating of the tap.
• The seating of pillar tap shall be integral with the body and edges
rounded to avoid cutting of washer.
• Pillar taps shall be nickel chromium plated and thickness of coating shall
not be less than service grade No. 2 of IS 4827.
• Plating shall be capable of taking high polish which shall not easily
tarnish or scale.
• Every pillar tap, complete with its component parts shall withstand an
internally applied hydraulic pressure of 50 kg/sq.cm. maintained for a
period of 2 minutes during which period it shall not leak or sweat.
2. SINKS –
• Laboratory sinks and kitchen sinks shall be of white glazed fire clay
confirming to IS 771 (Part2) with up to date amendments.
• The kitchen sink shall be of one piece construction with or without
rim but without overflow.
• Stainless steel kitchen sink shall be of sizes as specified.