Professional Documents
Culture Documents
Figure 3.A.1: Anchor-MSC Target-MSC Opposite-MSC
Figure 3.A.1: Anchor-MSC Target-MSC Opposite-MSC
Figure 3.A.1: Anchor-MSC Target-MSC Opposite-MSC
Tr Tr
Inter-MSC HO
RNC RNC
DHT DHT
Inter-MSC HO
ME : AAL2 link
: Radio Link
Tr : Transcoder
Figure 3.A.1
Opposite-MSC Anchor-MSC Target-MSC
Tr Tr
Tr
Inter-MSC HO
RNC RNC
DHT DHT
Inter-MSC HO
ME : AAL2 link
: Radio Link
Tr : Transcoder
Figure 3.A.2
Opposite-MSC Anchor-MSC Target-MSC
Tr Tr
Inter-MSC HO
RNC RNC
DHT DHT
In this case target MSC and anchor MSC need set transcoder, so an Inter-MSC HO
chor-MSC need inform-target MSC of the codec list supported by
UE
ME : AAL2 link
: Radio Link
Tr : Transcoder
Figure 3.A.3
Opposite-MSC Anchor-MSC Target-MSC
Tr
Tr Tr
Inter-MSC HO
RNC RNC
DHT DHT
Inter-MSC HO
: AAL2 link
: Radio Link
Tr : Transcoder
Figure 3.A.4
OoBTC is successful
or
Tr Tr
OoBTC is unsuccessful
RNC RNC
DHT DHT
Inter-MSC HO
In this case OoBTC is applied by anchor-MSC.
If OoBTC is successful, anchor-MSC dose not set transcoder.
If OoBTC is unsuccessful, anchor-MSC sets transcoder. Target-MS
C dose not set transcoder.
ME : AAL2 link
: Radio Link
Tr : Transcoder
Figure 3.B.1
Opposite-MSC Anchor-MSC Target-MSC
Tr Tr
Tr
RNC RNC
DHT DHT
In this case TrFO is not applied because Anchor MSC must set tran Inter-MSC HO
scoder whether TrFO is successful or not.
ME : AAL2 link
: Radio Link
Tr : Transcoder
Figure 3.B.3
Opposite-MSC Anchor-MSC Target-MSC
Tr Tr
RNC RNC
DHT DHT
Inter-MSC HO
In this case OoBTC is not applied by anchor-MSC because target
MSC must set transcoder whether TrFO is successful or not.
ME : AAL2 link
: Radio Link
Tr : Transcoder
Figure 3.B.2
Opposite-MSC Anchor-MSC Target-MSC
Tr Tr
RNC RNC
DHT DHT
Inter-MSC HO
In this case OoBTC is not applied by anchor-MSC because target
MSC must set transcoder whether TrFO is successful or not.
ME : AAL2 link
: Radio Link
Tr : Transcoder
Figure 3.B.4
Target RNC/BSS
ME Anchor RNC/BSS Anchor MSC Target MSC
Selection of codec
IAM, note 4
ERQ
ECF Note 5
ACM
selected codec information, note 3
Note 3: selected codec information is sent by the same message as the others(RRC/RANAP) or the message ind
ependent of the others (CC)
Note 4: Supported codec list may not be contained in IAM(BICC)
Note 5: This procedure is performed in the case where AAL2 is used between anchor MSC and target MSC
ACM
Note 6: selected codec information is sent by the same message as the others(RRC/RANAP) or the message independent of the others (CC)