Professional Documents
Culture Documents
Coimbatore-35
An Autonomous Institution
Accredited by NBA – AICTE and Accredited by NAAC – UGC with ‘A+’ Grade
Approved by AICTE, New Delhi & Affiliated to Anna University, Chennai
Consider a taper steel plate of uniform thickness, t = 25 mm. The young’s modulus
of the plate, E = 2 x 10^5 N/mm2 and weight density of 0.82 x 10^-4 N/mm3. In
addition to the self weight, the plate is subjected to a point load p = 100 N at it’s
mid point. Calculate the following by modeling the plate into two finite elements.
(i) Global Force Vector, (ii) Global Stiffness Matrix, (iii) Stress in each elements, (iv)
Displacement in each elements, (v) Reaction Forces at the support
07/28/2021 Problems on 1D Plate Elements (Tapered Steel Bar)/ 16AU405 - FEMA/ Mr D Rajesh Kumar / Automobile Engg / SNSCT 2 / 11
07/28/2021 Problems on 1D Plate Elements (Tapered Steel Bar)/ 16AU405 - FEMA/ Mr D Rajesh Kumar / Automobile Engg / SNSCT 3 / 11
07/28/2021 Problems on 1D Plate Elements (Tapered Steel Bar)/ 16AU405 - FEMA/ Mr D Rajesh Kumar / Automobile Engg / SNSCT 4 / 11
07/28/2021 Problems on 1D Plate Elements (Tapered Steel Bar)/ 16AU405 - FEMA/ Mr D Rajesh Kumar / Automobile Engg / SNSCT 5 / 11
07/28/2021 Problems on 1D Plate Elements (Tapered Steel Bar)/ 16AU405 - FEMA/ Mr D Rajesh Kumar / Automobile Engg / SNSCT 6 / 11
07/28/2021 Problems on 1D Plate Elements (Tapered Steel Bar)/ 16AU405 - FEMA/ Mr D Rajesh Kumar / Automobile Engg / SNSCT 7 / 11
07/28/2021 Problems on 1D Plate Elements (Tapered Steel Bar)/ 16AU405 - FEMA/ Mr D Rajesh Kumar / Automobile Engg / SNSCT 8 / 11
07/28/2021 Problems on 1D Plate Elements (Tapered Steel Bar)/ 16AU405 - FEMA/ Mr D Rajesh Kumar / Automobile Engg / SNSCT 9 / 11
07/28/2021 Problems on 1D Plate Elements (Tapered Steel Bar)/ 16AU405 - FEMA/ Mr D Rajesh Kumar / Automobile Engg / SNSCT 10 / 11
To be Continued in the next class..
07/28/2021 Problems on 1D Plate Elements (Tapered Steel Bar)/ 16AU405 - FEMA/ Mr D Rajesh Kumar / Automobile Engg / SNSCT 11 / 11