Professional Documents
Culture Documents
Mariann Amador
Product Manager
Arkray Global Business, Inc.(Miami)
ADAMS
ADAMS
AA utomatic
utomatic
D
D iabetes
iabetes
AA dvanced
dvanced
MM onitoring
onitoring
SS ystem
ystem
V
Operation
4
Start - Up
Column Status
Reagent Status
Start Up – Ready for Measurement
Calibration
Calibration materials
For HbA1c
Calibration HbA1c
Calibration HbA1c
Calibration HbA1c
Low level
High level
Control Materials
For HbA1c
Level 1 – 4 vials
Level 2 – 4 vials Assay Values
Control HbA1c
NOTE:
After 15 minutes, shake Reconstituted material
And invert vial to mix is good for 8 days
Add 5uL of reconstituted refrigerated
material to sample cup
Maintenance
21
User maintenance
1. Piercing nozzle cleaning
71237
Washing solution for tubes
Wipe off dirt from the back of the Blot up any liquid inside the
dilution container cover. dilution container and washing
• Use cotton swabs or gauze moistened container, and wipe off any dirt.
with purified water. • Use cotton swabs or gauze
• Be careful in particular not to leave moistened with purified water.
dirt on the sensors.
5. Washing the Air Filter
6. Nozzle washing block cleaning
Piercing nozzle & O-ring replacement
O-ring
Preparation
・ Cell Washing Kit (code :80386)···································1pc
・ Sodium hypochlorite solution (approx.0.75%) ··············4mL
Operation procedure
・ Refer to the package insert that come with the Cell washing
kit.
Replacement of Plunger seal (1/2)
If the plunger seal on the fluid pump becomes worn and fluid leaks
occur, the analyzer can no longer maintain the described flow rate or
produce accurate measurement results. The plunger seal inside the
pump head must be replaced if necessary.
③ ④ ⑤
Routine Maintenance
Item Day 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
Weekly maintenance
Item m/d, intial m/d, intial m/d, intial m/d, intial m/d, intial
Piercing nozzle cleaning
Automatic tube washing