XP-300 Certificate of PM-5914 02 9/20/13 C. Wilbur Calibration Workbook
1.0 PURPOSE /SCOPE
The purpose of this document is for use in the performance of calibration or calibration verification of the XP-300 analyzer and documentation of the test results from the process. The resulting certificate of calibration verification is provided to the customer and the entire record created as a result of this process is retained by the Sysmex Resource Center.
2.0 ASSOCIATED DOCUMENTS, FORMS AND GUIDELINES
Not Applicable
3.0 RESPONSIBILITIES/DEPARTMENTS AFFECTED
It is the responsibility of trained and authorized service personnel to perform calibration or calibration verification of the XP-300 analyzer and to document the test results from the process. This record will be retained by the Sysmex Resource Center.
4.0 PROCEDURE
See attached Process Manual.
Revision History
Revision # Effective Author(s) Sections(s) Affected / Description of Change
Date 02 9/20/13 C. Wilbur Edited WBC cell to reflect the changes for lot numbers.
For Use Only By Employees of Sysmex America Inc.
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION - IT MUST NOT BE REPRODUCED OR DISCLOSED TO OTHERS WITHOUT PRIOR WRITTEN APPROVAL. THE USER IS RESPONSIBLE FOR ENSURING THAT THE APPROPRIATE VERSION OF THE DOCUMENT IS OBTAINED FOR THE INTENDED USE.