Professional Documents
Culture Documents
NOKIA
IMPORTANT TO KNOW – ARCHITECTURE AND
CONFIGURATION
BCN – Box Controller Node
SFP0 SFP2 SFP4 SFP6
Factory usage
4x RJ-45
2xUSB
Alarm and sync 1xRJ-45
7x10GE 2x10GE 10x1GE
1x1GE
Debugging interfaces,
Tracing
Hardware
interfaces BCN UTRAN UTRAN interfaces 2x1GE (not used by mcRNC) maintenance
interconnect interfaces DCN
NOKIA
IMPORTANT TO KNOW – ARCHITECTURE AND
CONFIGURATION
BCN – Box Controller Node
• Each BCN contains two (2) Internal Switches
• Main Switch – Which has SFP0, SFP1, SFP2, SFP3, SFP4, SFP5, SFP6 & Trace
Port plus others linked internally
• External Switch – Which has SFP11, SFP12…..SFP21 & SFP22 + Others linked
internally
NOKIA
IMPORTANT TO KNOW – ARCHITECTURE AND
CONFIGURATION
BCN – Box Controller Node
Standard Working Configurations for mcRNC are;
NOKIA
IMPORTANT TO KNOW – ARCHITECTURE AND
CONFIGURATION
BCN – Box Controller Node
Standard Working Configurations for mcRNC are;
NOKIA
IMPORTANT TO KNOW – ARCHITECTURE AND
CONFIGURATION
BCN – Box Controller Node
Based on the configuration, the interconnection interface are utilized
BCN Interconnect
Factory usage
4x RJ-45
2xUSB
Alarm and sync 1xRJ-45
7x10GE 2x10GE 10x1GE
1x1GE
interfaces,
Tracing
Hardware
BCN UTRAN UTRAN interfaces 2x1GE (not used by mcRNC) maintenance
interconnect interfaces DCN
NOKIA
IMPORTANT TO KNOW –
ARCHITECTURE AND CONFIGURATION
BCN – Box Controller Node
Based on the configuration,
the interconnection interface
are utilized
NOKIA
IMPORTANT TO KNOW –
ARCHITECTURE AND CONFIGURATION
BCN – Box Controller Node
Based on the configuration,
the interconnection interface
are utilized
NOKIA
IMPORTANT TO KNOW –
ARCHITECTURE AND CONFIGURATION
BCN – Box Controller Node
Based on the configuration,
the interconnection interface
are utilized
NOKIA
IMPORTANT TO KNOW –
ARCHITECTURE AND CONFIGURATION
BCN – Box Controller Node
By default, all BCNs are delivered with S7-B configuration, where all the Interconnect SFPs are enabled.
When ports are enabled but are NOT utilized, it raises ETHERNET LINK FAILURE
alarm.
It is the responsibility of the commissioner of the BCN to know the RNC configuration and configure the
ports correctly
NOKIA
INVESTIGATE AND CORRECT
ETHERNET LINK FAILURE IF
CAUSED BY WRONG PORT
CONFIGURATION
NOKIA
INVESTIGATE AND CORRECT
ETHERNET LINK FAILURE ALARM
CHECK ALARM
NOKIA
INVESTIGATE AND CORRECT
ETHERNET LINK FAILURE ALARM
CHECK SPECIFIC ALARM DETAIL
NOKIA
INVESTIGATE AND CORRECT
ETHERNET LINK FAILURE ALARM
CHECK RNC CONFIGURATION
NOKIA
INVESTIGATE AND CORRECT
ETHERNET LINK FAILURE ALARM
CHECK SWITCH PORT STATUS
NOKIA
INVESTIGATE AND CORRECT
ETHERNET LINK FAILURE ALARM
CORRECT PORT CONFIGURATION
The RNC has scripts inside it to correct the configuration to the required status permanently
The scripts are listed below and must be executed with the root authority;
zs1_sfp_disable_bcnb.scli
zs3_sfp_disable_bcnb.scli
zs7_sfp_disable_bcnb.scli
NOKIA
INVESTIGATE AND CORRECT
ETHERNET LINK FAILURE ALARM
CORRECT PORT CONFIGURATION
NOKIA
INVESTIGATE AND CORRECT
ETHERNET LINK FAILURE ALARM
CHECK SWITCH PORTS AGAIN
NOKIA
INVESTIGATE AND CORRECT
ETHERNET LINK FAILURE ALARM
CHECK ALARMS AGAIN
NOKIA
INVESTIGATE AND CORRECT
ETHERNET LINK FAILURE ALARM
Thank You
NOKIA