Professional Documents
Culture Documents
Introduction To CTU Kamran
Introduction To CTU Kamran
Major Components
Engine
Hydraulics Pumps
Pressure Control Valves
Hydraulics Reservoir
Filters and Strainers
Heat Exchanger
Accumulator
Classification of Power Pack
Power packs are classified according to the
type of hydraulic circuit powering the injector
head. There are three types of injector head
hydraulic circuits:
standard open loop
Maximum pressure 3000 psi
Injector head
The injector head provide the surface drive force to
run and retrieve the CT from the well bore
Pressure control equipment
Stripper and BOP
Stripper
Stripper is a primary pressure controller
Types of stripper
Side door striper
Stripper assembly
Brass bushing assembly
Non extrusion ring/taplon spacer
Upper slender
Lower slander
Bop
Bop is the secondary pressure controller equipment
to provide contingency and emergency function
Bop ram
Blind
Shear
Slip
pipe
Application/operation
Nitrogen kickoff
Fill removal/clean out
Matrix stimulation
Hydraulic fracturing
thanks