Professional Documents
Culture Documents
Presented by
Himadri Shankar Behara (BE22123)
Hrithik Mahato (BE22168)
Sharath Chandra Palle (BE22177)
Guided by
Prof. Suvarna a Hande
The worldwide population is anticipated to contact 9.6 billion by 2050 – this represents a major
issue for the farming business.
Regardless of fighting difficulties like extraordinary climate conditions, rising environmental
change, and cultivating's ecological effect, the interest for more food must be met. To meet these
expanding needs, farming needs to go to new innovation.
New savvy cultivating applications dependent on IoT advances will empower the horticulture
business to decrease waste and upgrade profitability from enhancing manure use to expanding the
productivity of ranch vehicles' courses.
• Objectives
• (i) To develop an irrigation system that reduces water usage for better preservation, and
• (ii) To develop an application system that can assist the farmer to monitor the land’s condition and
control the irrigation system via a mobile platform.
• The sensor is connected to the GPIO pin which continuously gives input to the controller about the moisture
content.
• Once this value nears or becomes less than the threshold value given the code instructs the GPIO pin which is
connected to the relay board to activate.
• The program will loop for given period of time and then sends a signal to deactivate the relay thereby
switching of the supply.
• The NodeMCU which is connected to the internet will update the moisture value and also receive command
through cloud from the user sitting in any part of the world.
• The cloud services will ease the work of farmers and can be upgraded to control other components as well.
• Positive Impact :
• To reduce the consumption of water in the agriculture field and to bring a system which is solely based
on Internet of Things (IoT) where all information is viewed and controlled in fingertips.
•
• Negative impact:
• Increased unemployment.
• Hackers can easily hack the network and can get access to the important data of the users.
• The water pump used for irrigation cannot be powered by the Arduino so a 5V relay module is used with it.
And grow LED is also used as output device for this project.
Water pump used with relay Grow light LED for plants
• Future Scope:
• The future scope of the project would be to expand it area from not just irrigation but a
whole lot of other parameters such as pH of the soil, crop growth rate, type of crop etc.
and feed those data to cloud to get useful insights so that the overall yield can be
increased.