Professional Documents
Culture Documents
DL Wheel Loader
Feb, 2009
Overseas Product Support Team
Text No. OPR0003
Operation
Operation machine
1) Cabin layout
2) Monitor.
3) Switch.
2
Operation
3
Operation
* : Option
Fuse box
4
Operation
5
Operation
When key switch “On”, all indicator lights turn on for 2 sec with buzzer for checking monitor indicator lights.
(Except turn signal, high beam light, electrical steering, EMG steering and working light)
6
Operation
2. Hour meter.
7
Operation
8
Operation
10
Operation
1. Preheating light.
11
Operation
1. Reverse fan.
Display fan reversing condition.
(max. reversing time is for 5 minutes)
- Revering cooling fan.
Step 1 Stop engine.
Step 2 Key on.
Step 3 Press down reverse fan switch.
Step 4 Engine start.
12
Operation
13
Operation
2. Parking brake.
14
Operation
2. Air cleaner.
15
Operation
16
Operation
1. Emergency steering.
17
Operation
3) Switch - layout
Monitor panel
1. Key switch.
2. Auto travel switch.
3. Hazard switch.
4. Head light switch.
5. Front working lamp switch.
6. Rear working lamp switch.
7. Rear wind shield wiper switch.
8. Pilot cut off switch.
9. Parking brake switch. 10. Transmission cut off switch.
11. Mirror heater switch. 12. Reverse fan switch.
13. Engine diagnosis switch.14. Engine idling switch.
15. Emergency steering switch. 16. Rotating beacon switch.
17. Floating kick out switch. 18. LIS switch.
19. Seat warmer. 20. Fuel heater.
21. Cigar light. 22. 12V power socket.
23. F & R select switch. 24. F & R switch.
25. F & R lever. 26. Combination switch.
27. Horn switch. 28. Down shift switch. * Option
18
Operation
3) Switch (1)
1. Key switch.
O : Stop engine.
I : Key on
(Connect battery power to Ele. Components / preheating
: Starting engine
( Do not start engine during preheat light is on )
3) Switch (2)
1. Hazard switch.
Hazard light turns on
20
Operation
3) Switch (3)
21
Operation
3) Switch (4)
O : Off
I : Inject washer liquid.
II : Working for rear window shield wiper.
22
Operation
3) Switch (5)
3) Switch (6)
O : Off.
I : Heat rear view mirror.
(Max. heating time is 20 minutes)
3) Switch (7)
O : Off.
I : Engine trouble diagnosis
(Engine trouble code is displayed by engine warning or engine
stop light)
If engine warning light or engine stop light turns on or blinking, trouble code has been occurred.
3) Switch (8)
O : Off.
I : Increase engine idling RPM.
II : Decrease engine idling RPM.
Idling RPM adjust range is 700 ~ 1,100 and RPM adjustment
step is 25 RPM.
26
Operation
3) Switch (9)
O : Off.
I : Working position.
3) Switch (10)
O : Off.
I : Working LIS anytime.
II : Working LIS below condition only.
Forward traveling (On : Over 6 Km/h, Off : Below 4Km/h)
Reverse traveling (On : Over 4 Km/h, Off : Below 2Km/h)
28
Operation
3) Switch (11)
O : Off.
I : Heating fuel.
If fuel temperature is over then 5 ℃, the heater is not working.
2. Cigar lighter.
24V volts cigar lighter.
(Do not use it for 12V electric device )
29
Operation
3) Switch (12)
1. Power socket.
30
Operation
3) Switch (13)
1. F&R switch.
O : Neutral.
I : Forward.
II : Reverse.
For forward & reverse traveling, the F&R selector switch must
be pressed.
Shifting gear
Reverse
31
Operation
3) Switch (14)
1. Combination switch.
Right turn
High beam
32
Operation
3) Switch (15)
1. Horn switch.
Gear shift down / up, depends on working mode( Manual / Auto traveling)
33
Operation
3) Switch (16)
A : Neutral.
B : Forward.
C : Reverse.
D : Horn.
E : Kick down (Down shift)
34
Operation
3) Switch (17)
35