Professional Documents
Culture Documents
Electrical Tools Sam M
Electrical Tools Sam M
1
05/12/23
SCREWDRIVER
•PHILLIPS
• Slotted or Flathead
2
05/12/23
*Screwdrivers are used to connect wire to
receptacles, switches, lights,etc.
*Screwdrivers are also used to install and
remove switches, receptacles, plate and
panel covers. 3
05/12/23
NEEDLE NOSE PLIERS
4
05/12/23
*Needle nose pliers can be used to bend
wire. They also can be used cut smaller
diameter wire.
5
05/12/23
WIRESTRIPPERS
6
05/12/23
*Wire strippers are used to remove
insulation from wire. NOTE-the different
size openings for the different size wire.
7
05/12/23
HAMMER
8
05/12/23
Hammers are used to install plastic
receptacle and switch boxes.
9
05/12/23
TAPE MEASURE
10
05/12/23
A tape measure is used in the placement of
different type boxes. Ex: A light switch
might be 42” from the floor or a receptacle
might measure 16” from the floor.
11
05/12/23
DRILL AND BITS
13
05/12/23
Circuit Tester
14
05/12/23
Use a circuit tester to check and see if
electricity is flowing from one area to
another. If there is, the small light will
come on. 15
05/12/23
METER
16
05/12/23
A Multi-meter has many uses:
MEASURES VOLTAGE
MEASURES RESISTANCE IN
CIRCUIT
MEASURES WATTAGE
17
05/12/23
UTILITY KNIFE
18
05/12/23
A utility knife or pocket knife might be used
to cut away insulation or cut small
diameter wire.
19
05/12/23
LINESMAN PLIERS OR
SIDECUTTERS
20
05/12/23
Side cutters or Linesman pliers are used to
cut and bend larger diameter wire.
21
05/12/23